LAM-1025-1R5M-T

Axial Molded Inductor Dimensions (LAM-1025 Series) 6.35 ± 0.25 (B) C A L IB E R E L E C T R O N IC S IN C . specifications subject to change * revision 3-2003 0.50 ± 0.05 dia 2.41 ± 0.2 (A) 64.0 ± 2.0 (Not to scale) Dimensions in mm Part Numbering Guide LAM - 1025 - R10 K - T Dimensions A, B, (inch conversion) Packaging Style B=Bulk T=Tape & Reel F=Flat Pack Inductance Code Tolerance J=5%, K=10%, M=20% Features Inductance Range Tolerance Operating Temperature Construction Core Material (0.10 µH to 1.00 µH) Core Material (1.20 µH to 1000 µH) Dielectric Strength 0.1 µH to 1000 µH 5%, 10%, 20% -20°C to +80°C Unshielded Molded Epoxy Phenolic Ferrite 1000 Volts RMS Electrical Specifications L Code R10 R12 R15 R18 R22 R27 R33 R39 R47 R56 R68 R82 1R0 1R2 1R5 1R8 2R2 2R7 3R3 3R9 4R7 5R6 6R8 8R2 100 L (µH) 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.00 1.20 1.50 1.80 2.20 2.70 3.30 3.90 4.70 5.60 6.80 8.20 10.0 Q Min 40 40 38 35 33 33 30 30 30 30 28 28 25 25 28 30 30 37 45 45 45 50 50 55 55 Test Freq (MHz) 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 SRF Min (MHz) 680 640 600 550 510 430 410 365 330 300 275 250 230 150 140 125 115 100 90 80 75 65 60 55 50 RDC Max (Ohms) 0.08 0.09 0.10 0.12 0.14 0.16 0.22 0.30 0.35 0.50 0.60 0.85 1.00 0.18 0.22 0.30 0.40 0.55 0.85 1.00 1.20 1.80 2.00 2.70 3.70 IDC Max (mA) 1350 1270 1200 1105 1025 960 815 700 650 545 495 415 385 590 535 455 395 355 270 250 230 185 175 155 130 L Code 120 150 180 220 270 330 390 470 560 680 820 101 121 151 181 221 271 331 391 471 561 681 821 102 L (µH) 12.0 15.0 18.0 22.0 27.0 33.0 39.0 47.0 56.0 68.0 82.0 100 120 150 180 220 270 330 390 470 560 680 820 1000 Q Min 45 40 50 50 50 45 45 45 45 50 50 50 30 30 30 30 30 30 30 30 30 30 30 30 Test Freq (MHz) 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 SRF Min (MHz) 40 30 30 25 20 24 22 20 18 15 14 13 12 11 10 9 8 7 6.5 6 5 4 3.8 3.4 RDC Max (Ohms) 2.70 2.80 3.10 3.30 3.50 3.40 3.60 4.50 5.70 6.70 7.30 8.00 13 15 17 31 25 28 35 42 46 60 65 72 IDC Max (mA) 155 150 145 140 135 130 125 110 100 92 88 81 66 61 57 62 47 45 40 36 35 30 29 28 Rev. 10/00 Specifications subject to change without notice. TEL 949-366-8700 FAX 949-366-8707 WEB www.caliberelectronics.com