NCC5003GAGLP

CALIFORNIA MICRO DEVICES NCC BUSSED RESISTOR NETWORK California Micro Devices’ resistor arrays are the hybrid equivalent to the bussed resistor networks available in surface-mount packages. The resistors are spaced on ten mil centers resulting in reduced real estate. These chips are manufactured using advanced thin film processing techniques and are 100% electrically tested and visually inspected. STANDARD NETWORK SCHEMATIC DIAGRAM 90 Formats R1 R2 R3 R4 R5 R6 R7 R8 60 Die Size: 90±3 x 60±3 mils Bonding Pads: 5x7 mils typical ELECTRICAL SPECIFICATIONS Parameter TCR Operating Voltage Power Rating (per resistor) Thermal Shock High Temperature Exposure Moisture Life Noise Short Time Overload Insulation Resistance –55°C to 125°C –55°C to 125°C @ 70°C (Derate linearly to 0@150°C) Method 107 MIL-STD-202F 100Hrs @ 150°C Ambient Method 106 MIL-STD-202F Method 108 MIL-STD-202F (125°C/1000hr) Method 308 MIL-STD-202F ≥250kΩ MIL-R-83401 @25°C Test Conditions ±100ppm/C 50Vdc 50mw ±0.25%@∆R ±0.25%∆R ±0.5%∆R ±0.5%∆R –35dB –30dB 0.25% 1 x 101 2 Ω Max Max Max Max Max Max Max Max Max Max Min. M E C H A N I C A L S P E C I F I C AT I O N S Substrate Isolation Layer Backing Metalization Passivation Silicon 10 ±2 mils thick Si02 10,000Å thick, min Lapped (gold optional) Aluminum 10,000Å thick, min (15,000Å gold optional) Silicon Nitride VA L U E S 8 resistors from 100Ω to 500KΩ PA C K AG I N G Two inch square trays of 196 chips maximum is standard. N OT E S 1. Resistor pattern may vary from one value to another. PA R T N U M B E R D E S I G N AT I O N NCC Series 5003 Value First 3 digits are significant value. Last digit repressents number of zeros. R indicates decimal point. F Tolerance D = ±0.5% F = ±1% G = ±2% J = ±5% K = ±10% M = ±20% C0970500 A TCR No Letter = ±100ppm A = ±50ppm B = ±25ppm G Bond Pads G = Gold No Letter = Aluminum W Backing W = Gold L = Lapped No Letter = Either P Ratio Tolerance No Letter = 1% P = 0.5% © 2000 California Micro Devices Corp. All rights reserved. 6/2/2000 215 Topaz Street, Milpitas, California 95035 Tel: (408) 263-3214 Fax: (408) 263-7846 www.calmicro.com 1