PRN146-QR

CALIFORNIA MICRO DEVICES PRN 146/147 Applications • Circuit Interconnect • Crossovers on PC Boards ZERO OHM JUMPER ARRAY Features • Stable low resistance circuit interconnect • 10 or 12 jumpers/package • Saves board space and reduces assembly cost • Industry standard SOIC and QSOP (SSOP) packages Product Description CMD’s PRN146/147 Zero Ohm Networks in a miniature QSOP or SOIC package†, save critical board area and provide manufacturing cost and reliability efficiencies. Why zero ohm networks? Jumpers (or crossovers) are used as interconnects between points on a PC board. They are typically used to connect two points to alter the circuit functionality. This provides circuit flexibility and simplicity after board design. They may also be used as crossovers on the PC board when the layout may not permit this. STANDARD SPECIFICATIONS Resistance (R) Operating Temperature Range Power Rating/Jumper Minimum Insulation Resistance Storage Temperature Package Power Rating 0.3 Ohms (typical) 0OC to 70°C 250mW 10,000 Meg Ω -65OC to +150OC 1.00W, max. SCHEMATIC CONFIGURATION Pins 24 24 20 20 STANDARD PART ORDERING INFORMATION Ordering Part Number Package Tubes Tape & Reel Wide SOIC PRN146-S/T PRN146-S/R QSOP PRN146-Q/T PRN146-Q/R Wide SOIC PRN147-S/T PRN147-S/R QSOP PRN147-Q/T PRN147-Q/R Part Marking PRN146-S PRN146-Q PRN147-S PRN147-Q ©1998 California Micro Devices Corp. All rights reserved. P/Active® is a registered trademark and PAC is a trademark of California Micro Devices. 7 / 98 7/97 C0120597D C0120597D 215 Topaz Street, Milpitas, Milpitas, California 95035 Tel: (408) 263-3214 263-3214 263-7846 www.calmicro.com 215 Topaz Street, California 95035 Tel: (408) Fax: (408) Fax: (408) 263-7846 1