26100

2600 SERIES Bobbin Wound Surface Mount Inductors SELECTION GUIDE (UNSHIELDED TYPES) 1 Inductance Range DC Resistance Nominal Self DC Current Resonant Continuous2 Frequency Nominal Inductance Mechanical µH µH Order Code 1Hz, 100mV 1Hz, 100mV 263R3 264R7 266R8 26100 26120 Ω MAX 0.035 0.045 0.054 0.060 0.068 0.090 0.087 0.100 0.120 0.170 0.220 0.350 0.470 0.730 1.150 1.480 2.250 A MAX 4.40 3.60 3.10 2.60 2.42 2.27 2.10 1.95 1.50 1.28 1.11 0.97 0.78 0.66 0.52 0.42 0.28 Dimensions MHz 100mVrms 3.3 4.7 6.8 10 12 15 18 22 33 47 68 100 150 220 330 470 680 2.13–3.95 3.41–6.34 5.00–9.28 8.00–12.0 7.95–14.8 12.0–18.0 12.9–24.0 17.6–26.4 26.4–39.6 42.3–51.7 61.2–74.8 90.0–110 135–165 198–242 297–363 423–517 612–748 53.0 37.0 31.0 24.8 24.0 20.2 19.0 16.9 12.8 10.2 8.37 6.56 5.20 4.00 3.14 2.54 1.97 1 FEATURES s Bobbin Format s Up to 4.6A IDC s 3.3µH to 680µH s Optional Integral EMI Shield s Low DC Resistance s Surface Mounting s Compact Size s Tape and Reel Packaging DESCRIPTION The 2600 series is a range of bobbin wound surface mount inductors designed for use in switching power supply and power line filter circuits. The parts are suitable for any application requiring a high saturation current in a miniature surface mount footprint. Where EMI is a critical factor the devices are available with an integral ferrite EMI shield. 26150 26180 26220 26330 26470 26680 26101 26151 26221 26331 26471 26681 SELECTION GUIDE (EMI SHIELDED TYPES) 1 Inductance Range DC Resistance Nominal Self DC Current Resonant Continuous2 Frequency Nominal Inductance Mechanical µH µH Order Code 1Hz, 100mV 1Hz, 100mV 26S3R3 26S4R7 26S6R8 26S100 26S120 26S150 26S180 26S220 26S330 26S470 26S680 26S101 26S151 26S221 26S331 26S471 26S681 Ω MAX 0.033 0.038 0.043 0.050 0.058 0.060 0.074 0.070 0.100 0.120 0.170 0.250 0.400 0.520 0.800 1.200 1.780 A MAX 4.60 3.80 3.21 2.65 2.55 2.45 2.32 2.20 1.80 1.50 1.26 1.05 0.85 0.70 0.57 0.48 0.40 Dimensions MHz 100mVrms 3.3 4.7 6.8 10 12 15 18 22 33 47 68 100 150 220 330 470 680 2.69–5.46 3.58–7.15 4.60–8.97 8.00–12.0 8.42–15.9 12.0–18.0 13.4–25.6 18.7–26.4 28.1–39.6 40.0–56.4 57.8–81.6 85.0–120 128–180 187–264 281–396 400–564 578–816 46.0 38.0 30.0 22.9 21.0 19.7 16.0 15.5 11.5 9.44 7.47 6.04 4.67 3.75 2.87 2.33 1.83 2 ABSOLUTE MAXIMUM RATINGS Operating free air temperature range Storage temperature range –40°C to 85°C –40°C to 125°C www.dc-dc.com 1 Specifications typical at T A =25°C 2 The maximum DC current is the value at which the inductance falls to 80% of its nominal value or until its temperature rise reaches 40°C, whichever is sooner. 2600 SERIES Bobbin Wound Surface Mount Inductors 1 - MECHANICAL DIMENSIONS 9.00±0.40 (UNSHIELDED TYPES) 2 - MECHANICAL DIMENSIONS 11.60 (EMI SHIELDED TYPES) 5.40±0.40 5.40±0.50 1.00 10.00±0.40 12.60 Recommended Footprint Details R1.00 2.50±0.05 Recommended Footprint Details R1.00 2.50±0.05 10.00±0.05 10.00±0.05 9.50±0.05 Unless otherwise stated all dimensions in mm ±0.35mm. Hatching represents solder pads. 9.50±0.05 Unless otherwise stated all dimensions in mm ±0.35mm. Hatching represents solder pads. PACKAGE DETAILS Order Code TYP Weight (g) Packaging Style 26XXX 26SXXX 1.54 2.34 Tape & Reel 1 1 For tape and reel packaging details refer to datasheet NDCAN002 C&D Technologies (NCL) Limited reserve the right to alter or improve the specification, internal design or manufacturing process at any time, without notice. Please check with your supplier or visit our web site to ensure that you have the current and complete specification for your product before use. © C&D Technologies (NCL) Limited 2001 NMP 2600.3 No part of this publication may be copied, transmitted or stored in a retrieval system or reproduced in any way including, but not limited to, photography, photocopy, magnetic or other recording means, without prior written permission from C&D Technologies (NCL) Limited. Instructions for use are available from www.dc-dc.com C&D Technologies (NCL) Ltd Tanners Drive, Blakelands North Milton Keynes MK14 5BU, England Tel: +44 (0)1908 615232 Fax:+44 (0)1908 617545 email: info@cdtechno-ncl.com www: http://www.dc-dc.com C&D Technologies (NCL), Inc. 5816 Creedmoor Road, Raleigh NC 27612, USA Tel: +1 (919) 571-9405 Fax: +1 (919) 571-9262 email: info@us.cdtechno-ncl.com