49680

4900 SERIES Dual Winding Surface Mount Inductors SELECTION GUIDE2 Nominal Inductance1 Inductance Range DC Resistance MAX DC Current Continuous3 µH Order Code 492R2 493R3 494R7 496R8 49100 49150 10kHz,100mV µH 10kHz, 100mV mΩ 1&3, 2&4 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 1&3, 2&4 1&3, 2&4 12.6 14.9 17.1 27.0 41.0 53.0 81.0 128 191 233 348 529 805 A MAX 1&2 S/C to 3&4 S/C 9.50 7.80 6.50 5.40 4.50 3.70 3.00 2.50 2.10 1.71 1.41 1.15 0.95 1.77 - 2.65 2.47 - 3.70 3.29 - 4.93 5.27 - 7.91 7.70 - 11.6 10.6 - 16.0 15.9 - 23.8 24.5 - 36.8 35.1 - 52.6 50.8 - 76.2 73.6 - 110 111 - 166 167 - 251 FEATURES ■ 2.2µH to 880µH1 ■ Up to 9.5A IDC ■ Bobbin Format ■ Dual Winding ■ Surface Mounting ■ Integral EMI Shield ■ Compact Size ■ Tape and Reel Packaging ■ No Voltage Breakdown at 500VDC DESCRIPTION The 4900 series is a range of dual wind inductors offering flexible options. Windings have a 1:1 ratio and can be connected in series or parallel to create a wide range of inductance combinations. The secondary winding could be used as a feedback winding in switched mode power supplies. 49220 49330 49470 49680 49101 49151 49221 PACKAGE DETAILS Order Code TYP Weight (g) Packaging Style QTY 49XXX 4 Tape & Reel 500 MECHANICAL DIMENSIONS 0.47 (12.0) 2 0.47 (12.0) 1 3 4 Recommended Footprint Details PIN CONNECTIONS (TOP VIEW) 0.315 (8.0) MAX 1 2 4 3 All dimensions in inches (mm) 0.04 (1.0) 0.20 (5.0) 0.20 (5.0) 0.59 (15.0) 3 & 1 = Primary Winding 4 & 2 = Secondary Winding ABSOLUTE MAXIMUM RATINGS Operating free air temperature range Storage temperature range C&D Technologies (NCL) Ltd Tanners Drive, Blakelands North Milton Keynes MK14 5BU, England Tel: +44 (0)1908 615232 Fax: +44 (0)1908 617545 email: info@cdtechno-ncl.com C&D Technologies Inc. 3400 E Britannia Drive, Tucson, Arizona 85706, USA Tel: +1 (800) 547-2537 Fax: +1 (520) 741-4598 email: sales@cdtechno.com –40°C to 85°C –40°C to 125°C C&D Technologies (NCL) Limited reserve the right to alter or improve the specification, internal design or manufacturing process at any time, without notice. Please check with your supplier or visit our web site to ensure that you have the current and complete specification for your product before use. © C&D Technologies (NCL) Limited 2003 NMP 4900.1 1 When connecting windings in series, inductance will be 4 times the nominal figure shown. 2 Specifications typical at TA=25°C 3 If current is flowing in both windings the maximum DC current occurs when either the inductance falls to 75% of its nominal value or when its temperature rise reaches 40°C, whichever is sooner. No part of this publication may be copied, transmitted or stored in a retrieval system or reproduced in any way including, but not limited to, photography, photocopy, magnetic or other recording means, without prior written permission from C&D Technologies (NCL) Limited. Instructions for use are available from: www.cdpoweronline.com www.cdpoweronline.com