HL01U12D12

Product Data Sheet 1 WATT UNREGULATED DC/DC CONVERTER HL01U FEATURES G G G G LOW COST INTERNAL FILTERING SURFACE MOUNT CONSTRUCTION TEMPERATURE RANGE: -25°C TO +70°C G HIGH EFFICIENCY G NON-CONDUCTIVE CASE G SURFACE MOUNT PACKAGE (SMD) DESCRIPTION The HL01U Series offers an extensive selection of input and output voltages to choose from. These miniature, unregulated DC/DC converters come in 24-pin DIP and SMD packages. This small size is possible through the use of surface mount manufacturing technologies. The HL01U Series utilizes a 125KHz push-pull oscillator in the input stage with internal filtering to reduce the output noise. The use of surface mount construction and automated manufacturing processes increase consistency and reliability while reducing overall cost. ABSOLUTE MAXIMUM RATINGS Internal Power Dissipation..................................................................30 Sec Short Circuit Duration..................................................................Momentary Lead Temperature (soldering, 10 seconds max)..............................+300°C ORDERING INFORMATION HL01U xxyzz Y/Z /H HL01U Device Family HL Indicates DC/DC Converter Model Number Where: xx = Input Voltage y = Number or Outputs (Single "S", Dual "D") zz = Output Voltage Package Option Screening Option DIP Package only * * Note: Refer to Reflow Profile for SMD Models. Internet: http://www.cdpowerelectronics.com Power Electronics Division, United States 3400 E Britannia Drive, Tucson, Arizona 85706 Phone: 800.547.2537 Fax: 520.770.9369 Power Electronics Division, Europe C&D Technologies (Power Electronics) Ltd. 132 Shannon Industrial Estate , Shannon, Co. Clare, Ireland Tel: +353.61.474.133 Fax:+353.61.474.141 Page 1 HL01UrevD,10/97 ELECTRICAL SPECIFICATIONS Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified. NOMINAL INPUT VOLTAGE MODEL HL01U05S05 HL01U05S12 HL01U05S15 HL01U12S05 HL01U12S12 HL01U12S15 HL01U15S05 HL01U15S12 HL01U15S15 HL01U24S05 HL01U24S12 HL01U24S15 HL01U05D05 HL01U05D12 HL01U05D15 HL01U12D05 HL01U12D12 HL01U12D15 HL01U15D05 HL01U15D12 HL01U15D15 HL01U24D05 HL01U24D12 HL01U24D15 (VDC) 5 5 5 12 12 12 15 15 15 24 24 24 5 5 5 12 12 12 15 15 15 24 24 24 RATED OUTPUT VOLTAGE (VDC) 5 12 15 5 12 15 5 12 15 5 12 15 ±5 ±12 ±15 ±5 ±12 ±15 ±5 ±12 ±15 ±5 ±12 ±15 RATED OUTPUT CURRENT (mA) 200 83 67 200 83 67 200 83 67 200 83 67 ±100 ±41 ±33 ±100 ±41 ±33 ±100 ±41 ±33 ±100 ±41 ±33 INPUT CURRENT NO LOAD (mA) 30 30 30 25 25 25 20 20 20 15 15 15 30 30 30 25 25 25 20 20 20 15 15 15 RATED LOAD (mA) 300 260 260 120 120 120 100 100 100 65 65 65 300 260 260 120 120 120 100 100 100 65 65 65 EFFICIENCY (%) 70 74 74 67 70 70 67 70 70 67 70 70 70 74 74 67 70 70 67 70 70 67 70 70 COMMON SPECIFICATIONS Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified. PARAMETER INPUT Voltage Range CONDITIONS MIN 4.5 10.8 13.5 22.6 TYP 5 12 15 24 30 MAX 5.5 13.2 16.5 26.4 100 UNITS VDC Reflected Ripple Current ISOLATION Rated Voltage Test Voltage Resistance Capacitance Leakage Current OUTPUT Rated Power Voltage Setpoint Accuracy Temperature Coefficent Ripple & Noise Line Regulation Load Regulation 5 Vout Models All Others GENERAL Switching Frequency Package Weight MTTF per MIL-HDBK-217, Rev. F Ground Benign VDC mAp-p 60 Hz, 10 Seconds 500 500 1 25 2 1 ±3 ±0.02 50 10 1 ±5 ±3 125 12 VISO= 240VAC, 60Hz VDC Vpk GΩ pF µArms W % %/°C mVp-p mVrms %/% % % kHz g kHr kHr ±5 100 ±1.5 ±10 ±10 BW = DC to 10MHz BW =10Hz to 2MHz High Line to Low Line 25% Rated Load to Rated Load 10% Rated Load to Rated Load Circuit Stress Method TA = +25°C TA = +70°C -25 -40 -40 1100 550 TEMPERATURE Specification Operation Storage +70 +85 +110 °C °C °C Page 2 HL01UrevD,10/97 MECHANICAL Package/Pinout "Y" and "Z" 1.285±0.010" (32.64±0.25) 1514 13 1.285±0.010" (32.64±0.25) 2423 22 2423 22 1514 13 TOP VIEWS 0.525±0.010" (13.34±0.25) 0.525±0.010" (13.34±0.25) HL01UxxyzzY HL01UxxyzzZ 0.695±0.015" (17.65±0.38) 123 10 11 12 123 10 11 12 0.375±0.005" (9.52±0.13) 0.015±0.005" (0.38±0.13) 0.020±0.002" (0.51±0.05) SIDE VIEWS 0.375±0.005" (9.52±0.13) 0.015±0.005" (0.38±0.13) 0.100±0.010" (2.54±0.25) 0.020±0.002" (0.51±0.05) 0.100±0.010" (2.54±0.25) END VIEWS 0°-15° 0.600" (15.24) 0.125+0.030" -0.000" (3.18+0.76) ( -0.00) 0.014±0.002" (0.36±0.05) .015±.010" (.38±.25) DIP PACKAGE NU = Do Not Use. NC = No Internal Connection. Duplicate pin functions are internally connected. All dimensions are in inches (millimeters). GRID: 0.100 inches (2.54 millimeters) Typically Marked with: specific model ordered, date code, job code and Logo. SMD PACKAGE PIN CONNECTIONS PIN# 1 2 3 10 11 12 13 14 15 22 23 24 SINGLES +VIN NU NU -VOUT +VOUT -VIN -VIN +VOUT -VOUT NU NU +VIN DUALS +VIN -VOUT Common Common +VOUT -VIN -VIN +VOUT Common Common -VOUT +VIN RECOMMENDED LAND PATTERN 0.100" (2.54) 2423 22 1514 13 RECOMMENDED REFLOW PROFILE 30 sec MAX (>220°C) 250 235 °C MAX 220 200 190 TEMPERATURE (°C) 0.730" (18.54) 0.040" (1.02) 123 0.080" (2.03) 150 10 11 12 100 1.150" (29.21) 90 sec MAX (>190°C) 50 TIME (seconds) HL01UrevD,10/97 Page 3 TYPICAL PERFORMANCE CURVES Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified. VOUT VS LOAD (5Vout Models) 6.2 5.9 Vout (Volts) Vout (Volts) VOUT VS LOAD (±5Vout Models) 6.3 6.0 Vout (Volts) VOUT VS LOAD (12Vout Models) 14.0 13.6 13.2 12.8 12.4 12.0 5.6 5.3 5.0 4.7 0 50 100 Load (mA) VOUT VS LOAD (±12Vout Models) 12.8 12.6 150 200 5.7 5.4 5.1 4.8 0 25 50 Load (mA) VOUT VS LOAD (15Vout Models) 16.1 15.8 75 100 0 20 40 Load (mA) 60 80 VOUT VS LOAD (±15Vout Models) 15.8 15.6 Vout (Volts) Vout (Volts) 12.4 12.2 12.0 11.8 0 10 20 Load (mA) 30 40 Vout (Volts) 15.5 15.2 14.9 14.6 0 20 40 Load (mA) 60 80 15.4 15.2 15.0 14.8 0 10 20 Load (mA) 30 40 EFFICIENCY VS LOAD 1.0 Efficiency (%) 0.8 0.6 0.4 0.2 0.0 0 25 50 Load (mA) 75 100 SAFE OPERATING AREA 600 LOAD CAPACITANCE vs INPUT RISE TIME (5 Vout models) 60 LOAD CAPACITANCE vs INPUT RISE TIME (15 Vout models) 500 50 Total Load Capacitance (uF) Total Load Capacitance (uF) 400 40 300 30 SAFE OPERATING AREA 200 SAFE OPERATING AREA 20 100 10 0 0 5 10 15 20 25 30 35 Rise Time of Input Voltage (mS) 40 45 50 0 0 5 10 15 20 25 30 35 40 45 50 Rise Time of Input Voltage (mS) LOAD CAPACITANCE vs INPUT RISE TIME (12 Vout models) 90 NOTES: 1.) When operated within the SAFE OPERATING AREA as defined by the above curves, the output voltage of HL01U devices is guaranteed to be within 95% of its steady-state value within 100 milliseconds after the input voltage has reached 95% of its steadystate value. 2.) For dual output models, total load capacitance is the sum of the capacitances on the plus and minus outputs. Total Load Capacitance (uF) 80 70 60 50 40 30 20 10 0 0 5 10 15 20 25 30 35 40 45 50 Rise Time of Input Voltage (mS) SAFE OPERATING AREA Page 4 HL01UrevD,10/97