HPR711

Product Data Sheet 5 WATT UNREGULATED SIP DC/DC CONVERTER HPR7XX FEATURES q q q q EFFICIENCY >80% SIP PACKAGE HIGH POWER DENSITY: > 16 WATTS/INCH3 LOW COST q SINGLE AND DUAL OUTPUTS q INTERNAL INPUT AND OUTPUT FILTERING q SIX-SIDED SHIELDING DESCRIPTION The HPR7XX Series provides high power densities where space is critical. The small SIP package measures only 2.2" x .3" x .4" (56 x 9 x 10 mm). Designed for high density boards, the package is non-conductive, which presents advantages over painted metal enclosures. The series includes many different voltage models (other input and output voltages are available upon request), all set in a low thermal resistance molding compound, called Iso-ThermoFlex™, which provides excellent heat dissipation of internal components. The use of surface mount devices and manufacturing processes, combined with the encapsulation process, assure the user that the product is more environmentally rugged than any other DC/DC converter of its type. Operation down to no load will not impact the reliability of the series, although this product has a 10mA minimum load for specification purposes. It is recommended that all pins be used for current carrying capacity even though duplicate pin-outs are internally connected. The HPR7XX has 500VDC isolation barrier between input and output, offering the designer maximum flexibility in grounding options and polarity configurations. The outstanding MTTF, superior reliability, and low cost make it an excellent choice for any high power- density applications. MECHANICAL 2.210 + 0-.10 (56.13) PIN CONNECTIONS: Duals 1. +VIN 2. +VIN 6. -VIN 7. -VIN 9. -VIN 14. +VOUT 15. COM 19. COM 20. -VOUT TOP VIEW 0.340 + .010 (8.64) PIN CONNECTIONS: Singles 1. +VIN 2. +VIN 7. -VIN 9. -VIN 15. +VOUT 19. -VOUT FRONT VIEW 0.030 + -.010 (0.76) CL 0.020 + .002 (0.51) 0.400 + .010 (10.16) 0.140 + .020 (3.56) 0.050 + .015 (1.27) 6. -VIN 14. +VOUT 20. -VOUT 0.140 + .020 (3.56) 0.010 + .002 (0.25) 0.155 + -.15 (3.94) RIGHT SIDE VIEW BOTTOM VIEW 12 67 9 14 15 19 20 All dimensions are in inches (millimeters) GRID: 0.100 inches (2.54 millimeters) PIN PLACEMENT TOLERANCE: ±0.015" 3400 E. Britannia Drive • Tucson, Arizona 85706 • Phone: 520.295.4100 • Fax: 520.770.9369 • Internet: http://www.cdpowerelectronics.com HPR7XX REV B 6/98 Page 1 ELECTRICAL CHARACTERISTICS Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified. NOMINAL INPUT VOLTAGE (VDC) 5 5 5 5 12 12 12 15 15 RATED OUTPUT VOLTAGE (VDC) 5 ±5 ±12 ±15 5 ±12 ±15 5 ±15 RATED OUTPUT CURRENT (mA) 1000 ±500 ±208 ±167 1000 ±208 ±167 1000 ±167 INPUT CURRENT NO LOAD RATED LOAD (mA) 70 70 70 70 25 25 25 20 20 (mA) 1250 1250 1190 1190 490 490 490 407 392 REFLECTED RIPPLE CURRENT (mAp-p) 15 15 15 15 15 15 15 15 15 EFFICIENCY (%) 80 80 84 84 80 85 85 82 85 MODEL HPR700 HPR703 HPR704 HPR705 HPR706 HPR710 HPR711 HPR712 HPR717 Note: Other input to output voltage options may be available. Please consult factory. COMMON SPECIFICATIONS Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified. PARAMETER INPUT Voltage Range CONDITIONS MIN TYP MAX UNITS VDC VDC VDC Voltage Rise Time ISOLATION Rated Voltage Test Voltage Resistance Capacitance Leakage Current OUTPUT Rated Power Voltage Setpoint Accuracy Temperature Coefficent Ripple & Noise Voltage 4.75 5 5.25 11.4 12 12.6 14.2 15 15.8 See Application Note: "Capacitive Loading Effects on Start-Up of DC/DC Converters" 60 Hz, 10 seconds 500 500 1 55 5 VISO= 240VAC, 60Hz VDC Vpk GW pF µArms Rated Load, Nominal VIN BW = DC to 10MHz BW =10Hz to 2MHz IL=10mA, VOUT = 5V IL=10mA, VOUT = ±12V IL=10mA, VOUT = ±15V 5 ±3 ±0.05 50 5 5.75 13.10 16.25 W % %/Deg C mVp-p mVrms VDC VDC VDC REGULATION Line Regulation Load Regulation (5V out only) Load Regulation (All other Models) GENERAL Switching Frequency Package Weight MTTF per MIL-HDBK-217, Rev. E Ground Benign TEMPERATURE Specification Operation Storage High Line to Low Line Rated Load to No Load Rated Load to No Load 1.2 15 10 %/%Vin % % 170 7 Circuit Stress Method TA = +25°C 2000 kHz g kHr -25 -40 -40 +25 +70 +85 +110 °C °C °C ABSOLUTE MAXIMUM RATINGS Internal Power Dissipation.......................................................................1.7W Short Circuit Protection..................................................................Momentary Lead Temperature (soldering, 10 seconds max)................................+300°C ORDERING INFORMATION HPR Device Family HPR indicates DC/DC converter Model Number Screening Option 7XX /H Page 2 HPR7XX REV B 6/98 TYPICAL PERFORMANCE CURVES Specifications typical at TA = +25°C, rated input voltage, rated output current unless otherwise specified. VOUT VS LOAD 5.6 5.4 Vout 5.2 5.0 4.8 10 Vout (5VOUT Models) 5.6 5.4 5.2 5.0 4.8 10 VOUT VS LOAD (+5VOUT Models) 250 500 750 Output Current (mA) VOUT VS LOAD 1000 250 500 750 Output Current (mA) VOUT VS LOAD 1000 12.6 12.4 Vout (+12VOUT Models) 15.6 15.4 Vout 15.2 15.0 14.8 10 (+15V OUT Models) 12.2 12.0 11.8 10 250 500 750 1000 Output Current (mA) 250 500 750 Output Current (mA) 1000 The information provided herein is believed to be reliable; however, C&D TECHNOLOGIES assumes no responsibility for inaccuracies or omissions. C&D TECHNOLOGIES assumes no responsibility for the use of this information, and all use of such information shall be entirely at the user’s own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. C&D TECHNOLOGIES does not authorize or warrant any C&D TECHNOLOGIES product for use in life support devices/systems or in aircraft control applications. HPR7XX REV B 6/98 Page 3 ENGINEERING NOTES Page 4 HPR7XX REV B 6/98