NMA1215S

NMA 5V & 12V SERIES Isolated 1W Dual Output DC-DC Converters SELECTION GUIDE Nominal Input Voltage Output Voltage Output Current Input Current at Rated Load MTTF 1 Order Code NMA0505D NMA0509D NMA0512D NMA0515D (V) 5 5 5 5 5 5 5 5 12 12 12 12 12 12 12 12 (V) 5 9 12 15 5 9 12 15 5 9 12 15 5 9 12 15 (mA) ±100 ±55 ±42 ±33 ±100 ±55 ±42 ±33 ±100 ±55 ±42 ±33 ±100 ±55 ±42 ±33 (mA) 289 270 266 263 289 270 266 263 120 113 111 110 120 113 111 110 (%) 69 75 77 78 69 75 77 78 69 74 75 76 69 74 75 76 (pF) 28 32 34 36 28 32 34 36 33 46 55 54 33 46 55 54 kHrs 1697 682 343 188 1697 682 343 188 559 375 243 154 559 375 243 154 SIP DIP SIP DIP FEATURES s Wide Temperature performance at full 1 Watt load, –40°C to 85°C s Dual Output from a Single Input Rail s Industry Standard Pinout s Power Sharing on Output s 1kVDC Isolation s Efficiency to 78% s Power Density up to 0.85W/cm3 s 5V & 12V Input s 5V, 9V, 12V and 15V Output s Footprint from 1.17cm 2 s UL 94V-0 Package Material s No Heatsink Required s Internal SMD Construction s Toroidal Magnetics s Fully Encapsulated s No External Components Required s MTTF up to 2.1 Million hours s Custom Solutions Available s No Electrolytic or Tantalum Capacitors DESCRIPTION The NMA series of industrial temperature range DC-DC converters are the standard building blocks for on-board distributed power systems. They are ideally suited for providing dual rail supplies on primarily digital boards with the added benefit of galvanic isolation to reduce switching noise. All of the rated power may be drawn from a single pin provided the total load does not exceed 1watt. NMA0505S NMA0509S NMA0512S NMA0515S NMA1205D NMA1209D NMA1212D NMA1215D NMA1205S NMA1209S NMA1212S NMA1215S When operated with additional external load capacitance the rise time of the input voltage will determine the maximum external capacitance value for guaranteed start up. The slower the rise time of the input voltage the greater the maximum value of the additional external capacitance for reliable start up. INPUT CHARACTERISTICS Parameter Conditions MIN TYP MAX Units Voltage Range Continuous operation, 5V input types Continuous operation, 12V input types Reflected Ripple Current 4.5 10.8 5 12 20 5.5 13.2 33 V mA p-p OUTPUT CHARACTERISTICS Parameter Conditions MIN TYP MAX Units Rated Power2 Voltage Set Point Accuracy Line Regulation TA= –40°C to 120°C See tolerance envelope 1.0 10 9 6.5 6 40 25 25 20 1 W High V IN to low V IN 10% load to rated load, 5V output types 10% load to rated load, 9V output types Load Regulation 10% load to rated load, 12V output types 10% load to rated load, 15V output types BW=DC to 20MHz, 5V output types BW=DC to 20MHz, 9V output types Ripple & Noise BW=DC to 20MHz, 12V output types BW=DC to 20MHz, 15V output types 1.2 12.5 10 7.5 7.5 75 50 50 50 %/% % mV p-p ABSOLUTE MAXIMUM RATINGS Short-circuit duration 3 Internal power dissipation Lead temperature 1.5mm from case for 10 seconds Input voltage V IN , NMA05 types Input voltage V IN, NMA12 types 1 second 450mW 300°C 7V 15V www.dc-dc.com 1 Calculated using MIL-HDBK-217F with nominal input voltage at full load. 2 See derating curve 3 Supply voltage must be discontinued at the end of the short circuit duration. All specifications typical at TA=25°C, nominal input voltage and rated output current unless otherwise specified. NMA 5V & 12V SERIES Isolated 1W Dual Output DC-DC Converters ISOLATION CHARACTERISTICS Parameter Conditions MIN TYP MAX Units PIN CONNECTIONS 1000 10 VDC GΩ 14 Pin DIP PIN 1 GND 7 NC 8 0V 9 +V 11 –V 14 VIN 7 Pin SIP PIN 1 VIN 2 GND 4 –V 5 0V 6 +V Isolation Test Voltage Resistance Flash tested for 1 second Viso=500VDC GENERAL CHARACTERISTICS Parameter Conditions MIN TYP MAX Units Switching Frequency 5V input types 12V input types 110 140 kHz TEMPERATURE CHARACTERISTICS Parameter Conditions MIN TYP MAX Units Specification Storage Case Temperature Above Ambient Cooling All output types 5V output types All other output types Free air convection -40 -50 33 28 85 130 °C °C °C PERFORMANCE CHARACTERISTICS tolerance envelope +10% +5% V nominal 2.0 +2.5% -2.5% -7.5% 1.0 0.5 0 1.5 temperature derating graph Safe Operating Area 10 50 Output Load Current (%) 100 -40 0 50 100 Ambient Temperature (°C) 150 MECHANICAL DIMENSIONS 14 Pin DIP Weight: 2.4g 19.50 2.13 15.24 1.09 NMA0505D 9.80 6.80 7.62 4.60 3.60 0.55 0.45 2.54 1 7 0.30 0.20 XYYWWi 14 1 1 9 8 7 Pin SIP Weight: 2.1g 19.50 2.00 0.55 0.45 0.30 0.20 12.70 6.00 10.0 NMA0505S XYYWWi 1.25 4.60 3.60 12 4 2.54 5 6 0.55 0.45 All dimensions in mm XX.XX ±0.25mm. All pins on a 2.54mm pitch and within ±0.25mm of true position. C&D Technologies (NCL), Inc. 5816 Creedmoor Road, Raleigh NC 27612, USA Tel: +1 (919) 571-9405 Fax: +1 (919) 571-9262 email: info@us.cdtechno-ncl.com C&D Technologies (NCL) Limited reserve the right to alter or improve the specification, internal design or manufacturing process at any time, without notice. Please check with your supplier or visit our web site to ensure that you have the current and complete specification for your product before use. © C&D Technologies (NCL) Limited 2001 NDC NMA.3 No part of this publication may be copied, transmitted or stored in a retrieval system or reproduced in any way including, but not limited to, photography, photocopy, magnetic or other recording means, without prior written permission from C&D Technologies (NCL) Limited. Instructions for use are available from www.dc-dc.com C&D Technologies (NCL) Ltd Tanners Drive, Blakelands North Milton Keynes MK14 5BU, England Tel: +44 (0)1908 615232 Fax:+44 (0)1908 617545 email: info@cdtechno-ncl.com www: http://www.dc-dc.com