NME1215D

NME 5V & 12V SERIES Isolated 1W Single Output DC-DC Converters SELECTION GUIDE Nominal Input Voltage Output Voltage Output Current Input Current at Rated Load MTTF 1 Order Code NME0505D NME0509D NME0512D NME0515D NME0524D NME0505S NME0509S NME0512S NME0512S NME0524S NME1205D NME1209D NME1212D NME1215D NME1205S NME1209S NME1212S NME1215S (V) 5 5 5 5 5 5 5 5 5 5 12 12 12 12 12 12 12 12 (V) 5 9 12 15 24 5 9 12 15 24 5 9 12 15 5 9 12 15 (mA) 200 111 83 66 42 200 111 83 66 42 200 111 83 66 200 111 83 66 (mA) 289 260 256 250 248 289 260 256 250 248 120 115 110 111 120 115 110 111 (%) 69 77 78 80 80 69 77 78 80 80 69 74 76 75 69 74 76 75 (pF) 30 37 33 40 48 30 37 33 40 48 33 48 55 52 33 48 55 52 kHrs 2414 1173 633 360 290 2414 1173 633 360 290 620 488 360 252 620 488 360 252 SIP DIP SIP DIP FEATURES s Wide Temperature Performance at full 1 Watt load, –40°C to 85°C s Single Isolated Output s Industry Standard Pinout s 1kVDC Isolation s Efficiency to 80% s Power Density 1.53W/cm 3 s 5V & 12V Input s 5V, 9V, 12V and 15V Output s Footprint from 0.69cm s No Heatsink Required s Internal SMD Construction s Toroidal Magnetics s Fully Encapsulated s No External Components Required s MTTF up to 2.9 Million Hours s Custom Solutions Available s Pin Compatible with LME & NML Series s SIP & DIP Package Styles s PCB Mounting DESCRIPTION The NME Series of DC-DC Converters is particularly suited to isolating and/or converting DC power rails. The galvanic isolation allows the device to be configured to provide an isolated negative rail in systems where only positive rails exist. The wide temperature range guarantees startup from –40°C and full 1 watt output at 85°C. 2 s UL 94V-0 Package Material When operated with additional external load capacitance the rise time of the input voltage will determine the maximum external capacitance value for guaranteed start up. The slower the rise time of the input voltage the greater the maximum value of the additional external capacitance for reliable start up. INPUT CHARACTERISTICS Parameter Conditions MIN TYP MAX Units Continuous operation, 5V input types Continuous operation, 12V input types Reflected Ripple Current Voltage Range 4.5 10.8 5 12 26 5.5 13.2 48 V mA p-p OUTPUT CHARACTERISTICS Parameter Conditions MIN TYP MAX Units Rated Power2 Voltage Set Point Accuracy Line Regulation TA= –40°C to 85°C See tolerance envelope 1.0 14 9 7.5 7.0 85 60 50 40 1 W High V IN to low V IN 10% load to rated load, 5V output types 10% load to rated load, 9V output types Load Regulation 10% load to rated load, 12V output types 10% load to rated load, 15V output types BW=DC to 20MHz, 5V output types BW=DC to 20MHz, 9V output types Ripple & Noise BW=DC to 20MHz, 12V output types BW=DC to 20MHz, 15V output types 1.2 15 10 9.5 8.5 110 75 65 55 %/% % mV p-p ABSOLUTE MAXIMUM RATINGS Short-circuit duration 3 Internal power dissipation Lead temperature 1.5mm from case for 10 seconds Input voltage V IN , NME05 types Input voltage V IN , NME12 types 1 second 450mW 300°C 7V 15V www.dc-dc.com 1 Calculated using MIL-HDBK-217F with nominal input voltage at full load. 2 See derating curve 3 Supply voltage must be discontinued at the end of the short circuit duration. All specifications typical at TA=25°C, nominal input voltage and rated output current unless otherwise specified. NME 5V & 12V SERIES Isolated 1W Single Output DC-DC Converters ISOLATION CHARACTERISTICS Parameter Conditions MIN TYP MAX Units PIN CONNECTIONS 1000 10 VDC GΩ 8 Pin DIP PIN 1 GND 4 VIN 5 +V 7 0V 4 Pin SIP PIN 1 GND 2 VIN 3 0V 4 +V Isolation Test Voltage Resistance Flash tested for 1 second Viso=500VDC GENERAL CHARACTERISTICS Parameter Conditions MIN TYP MAX Units Switching Frequency 5V input types 12V input types 110 145 kHz TEMPERATURE CHARACTERISTICS Parameter Conditions MIN TYP MAX Units Specification Storage Case Temperature Above Ambient Cooling All output types 5V output types All other output types Free air convection -40 -50 85 130 41 32 °C °C °C PERFORMANCE CHARACTERISTICS tolerance envelope +10% +5% V nominal 2.0 +2.5% -2.5% -7.5% 1.0 0.5 0 1.5 temperature derating graph Safe Operating Area 10 50 Output Load Current (%) 100 -40 0 50 100 Ambient Temperature (°C) 150 MECHANICAL DIMENSIONS 8 Pin DIP Weight: 1.48g 11.50 1.94 7.62 1.09 NME0505D 9.80 XYYWWi 6.80 7.62 4.60 3.60 0.55 0.45 1 7 4 5 0.30 0.20 4 Pin SIP Weight: 1.30g 11.50 1.94 0.30 0.20 6.00 10.0 NME0505S XYYWWi 1 .25 7 .62 4.60 3.60 1234 0.55 0.45 All dimensions in mm XX.XX ±0.25mm. All pins on a 2.54mm pitch and within ±0.25mm of true position. C&D Technologies (NCL) Limited reserve the right to alter or improve the specification, internal design or manufacturing process at any time, without notice. Please check with your supplier or visit our web site to ensure that you have the current and complete specification for your product before use. © C&D Technologies (NCL) Limited 2001 NDC NME.3 No part of this publication may be copied, transmitted or stored in a retrieval system or reproduced in any way including, but not limited to, photography, photocopy, magnetic or other recording means, without prior written permission from C&D Technologies (NCL) Limited. Instructions for use are available from www.dc-dc.com C&D Technologies (NCL) Ltd Tanners Drive, Blakelands North Milton Keynes MK14 5BU, England Tel: +44 (0)1908 615232 Fax:+44 (0)1908 617545 email: info@cdtechno-ncl.com www: http://www.dc-dc.com C&D Technologies (NCL), Inc. 5816 Creedmoor Road, Raleigh NC 27612, USA Tel: +1 (919) 571-9405 Fax: +1 (919) 571-9262 email: info@us.cdtechno-ncl.com