NNL05-9C

NNL05 Series Non-Isolated DC/DC Converters SELECTION GUIDE Order Code Input Voltage Output Voltage V (nom.) V Adjustable between 0.75 & 3.3 Output Current Min. Load Full Load A A User Select Voltage VOUT 0.75 .2 .5 .8 2.5 3.3 0.75 .2 .5 .8 2.5 3.3 5.0 Efficiency % (Min.) 78 83 85 87 90 94 7 78 80 83 85 87 90 NNL05-9C2 4 0 5.0 FEATURES n compliant RoHS n Industry standard footprint n circuit protection Short n efficiency High n Under voltage lock out n adjustable output voltage Fully n Operating temperature range -40ºC to 85ºC n Construction SMD n UL60950 recognized INPUT CHARACTERISTICS1 Parameter Voltage range NNL05-0C2 2 Adjustable between 0.75 & 5.0 0 5.0 Conditions NNL05-9C VOUT < 2.75V NNL05-9C VOUT > 3.0V NNL05-0C Turn on threshold NNL05-9C Turn off threshold Turn on threshold NNL05-0C Turn off threshold NNL05-9C NNL05-0C VIN = 5.5V VOUT = 0.75V NNL05-9C VIN = 5.5V VOUT = 3.3V VIN = 2.0V VOUT = 0.75V NNL05-0C VIN = 2.0V VOUT = 5.0V Module Disabled Min. 3.0 4.0 0.0 Typ. Max. 5.5 5.5 4.0 Units V Under voltage lock out 2. .96 7.85 7.75 2.0 20.0 70 00 5 75 5.0 8.25 8.20 V DESCRIPTION The NNL05 series is part of a range of nonisolated, cost effective DC/DC converters offering high precision output voltages from a nominal 3.0-5.5V or 0.0-4.0V intermediate bus where isolation is not required. Currently available in SMD format and packaged in stackable trays or tape and reel packaging. The product range has been recognized by the Underwriters Laboratory (UL) to UL60950, file number E79522 applies. Reflected ripple current mA p-p Input no load current Input standby current mA mA OUTPUT CHARACTERISTICS Parameter Rated current Voltage set point accuracy Line regulation Load regulation Ripple & noise Conditions TA = –40°C to 85°C (see thermal performance characteristics) Using % tolerance resistor NNL05-9C Low line to high line NNL05-0C NNL05-9C 0% load to 00% load NNL05-0C BW = DC to 20MHz with NNL05-9C µF ceramic and 0µF NNL05-0C 0.75V tantalum capacitors NNL05-0C 5.0V Peak deviation NNL05-9C IOUT = 2.5A–5.0A–2.5A Settling time Peak deviation NNL05-0C IOUT = 2.5A–5.0A–2.5A Settling time Min. Typ. Max. 5.0 Units A % % % mV p-p mV µs mV µs A -3.0 +2.0 .0 0. .0 0.2 30 9 20 60 25 70 35 9.0 Transient response Current limit inception . If components are required in tape and reel format suffix order code with -R, e.g. NNL05-9C-R. 2. A 330µF low ESR capacitor, approx 7mΩ at 00kHz to 300kHz must be fitted at the input to the NNL DC/DC converter to ensure stability under all the operating conditions. All specifications typical at TA =25°C, nominal input voltage and rated output current unless otherwise specified. 　 For full details go to www.cd4power.com/rohs www.cd4power.com KDC_NNL05C.D02 Page  of 0 NNL05 Series Non-Isolated DC/DC Converters ABSOLUTE MAXIMUM RATINGS Short circuit protection Input voltage VIN Trim voltage Remote on/off Minimum load NNL05-9C NNL05-0C NNL05-9C NNL05-0C NNL05-9C NNL05-0C Continuous 6.0V 5.0V -0.35V to VOUT -0.3V to VOUT -0.35V to 6.0V -0.3V to +VOUT 0% GENERAL CHARACTERISTICS1 Parameter Switching frequency Start delay NNL05-9C NNL05-0C NNL05-9C Remote on/off NNL05-0C Module on (or pin unconnected) Module off Module on (or pin unconnected) Module off 0 2.6 .0 0 2.5 0.25 Conditions Min. Typ. 300 5.0 7.0 Max. Units kHz ms 0.5 -0.4 VIN 0.5 -0.4 VIN .0 V mA V mA V mA V mA TEMPERATURE CHARACTERISTICS1 Parameter Operation Storage Over temperature protection Conditions See thermal performance characteristics Absolute Max. internal temperature Operates at substrate temperature NNL05-9C NNL05-0C Min. -40 -55 Typ. Max. 85 25 Units °C °C °C 0 8 OUTPUT VOLTAGE ADJUSTMENT The trimming (adjust) input on the device allows output voltage adjustment from 0.75V to 3.3Vdc (NNL05-9C) or 5.0 (NNL05-0C) by using a resistor as shown in fig. or by applying a voltage between trim and common pins as shown in fig.2. To calculate the resistor value for NNL05-9C: RTRIM = 2070 – 50 Ω VOUT – 0.7525 Fig. +VIN TRIM +VOUT Table : NNL05-9C RTRIM & VTRIM VOUT SET (V) RTRIM (kΩ) 0.75 .2 .5 .8 2.5 3.3 Open 4.7 22.98 4.96 6.93 3.5 VTRIM (V) Open 0.624 0.573 0.505 0.403 0.267 NNL05 RTRIM Common To calculate the resistor value for NNL05-0C: RTRIM = 0500 – 000 Ω VOUT – 0.7525 Fig.2 +VIN TRIM +VOUT Table 2: NNL05-0C RTRIM & VTRIM VOUT SET (V) RTRIM (kΩ) 0.75 .2 .5 .8 2.5 3.3 5.0 Open 22.46 3.05 9.024 5.009 3.22 .472 VTRIM (V) Open 0.670 0.650 0.630 0.583 0.530 0.466 To calculate VTRIM for NNL05-9C: VTRIM = (0.7–0.698 x {VOUT – 0.7525}) To calculate VTRIM for NNL05-0C: VTRIM = (0.7–0.0667 x {VOUT – 0.7525}) Tables  & 2 provide RTRIM and VTRIM Values for the most commonly required output voltages. NNL05 VTRIM Common . Specifications typical at TA =25°C, nominal input voltage and rated output current unless otherwise specified. www.cd4power.com KDC_NNL05C.D02 Page 2 of 0 NNL05 Series Non-Isolated DC/DC Converters EFFICIENCY v LOAD GRAPHS (NNL05-9C) VOUT = 3.3V VOUT = 2.5V VOUT = 1.8V VOUT = 1.5V VOUT = 1.2V VOUT =0.75V www.cd4power.com KDC_NNL05C.D02 Page 3 of 0 NNL05 Series Non-Isolated DC/DC Converters EFFICIENCY v LOAD GRAPHS (NNL05-10C) VOUT = 5.0V VOUT = 3.3V VOUT = 2.5V VOUT = 1.8V VOUT = 1.5V VOUT =1.2V VOUT =0.75V www.cd4power.com KDC_NNL05C.D02 Page 4 of 0 NNL05 Series Non-Isolated DC/DC Converters THERMAL DERATING GRAPHS (NNL05-9C) VOUT = 3.3V VOUT = 2.5V VOUT = 1.8V VOUT = 1.5V VOUT = 1.2V VOUT =0.75V All derating graphs shown are for an input voltage, VIN = 5.5V www.cd4power.com KDC_NNL05C.D02 Page 5 of 0 NNL05 Series Non-Isolated DC/DC Converters THERMAL DERATING GRAPHS (NNL05-10C) VOUT = 5.0V VOUT = 3.3V VOUT = 2.5V VOUT = 1.8V VOUT = 1.5V VOUT =1.2V VOUT =0.75V All derating graphs shown are for an input voltage, VIN = 4.0V www.cd4power.com KDC_NNL05C.D02 Page 6 of 0 NNL05 Series Non-Isolated DC/DC Converters CHARACTERISTIC GRAPHS (NNL05-9C) TYPICAL OUTPUT RIPPLE & NOISE VIN = 5.0VDC VOUT = 3.3V IOUT = 5.0A TYPICAL OUTPUT RIPPLE & NOISE VIN = 5.0VDC VOUT = 0.75V IOUT = 5.0A TYPICAL START-UP FROM APPLICATION OF VIN TYPICAL START-UP USING REMOTE ON/OFF MTTF MTTF figures calculated by MIL-HDBK-27F ground benign. Ambient temperature 25°C, airflow 200LFM. Conditions NNL05-9C NNL05-0C VIN = 5.5V, VOUT = 3.3V VIN = 2.0V, VOUT = 5.0V MTTF (Hrs) 995057 420454 www.cd4power.com KDC_NNL05C.D02 Page 7 of 0 NNL05 Series Non-Isolated DC/DC Converters CHARACTERISTIC GRAPHS (NNL05-10C) TYPICAL OUTPUT RIPPLE & NOISE (0.75V OUTPUT) TYPICAL OUTPUT RIPPLE & NOISE (5.0V OUTPUT) TYPICAL START-UP FROM APPLICATION OF VIN TYPICAL START-UP USING REMOTE ON/OFF RoHS COMPLIANCE INFORMATION This series is compatible with RoHS soldering systems with a peak reflow solder temperature of 245ºC. The pin termination finish on this product series is Matte Tin over Nickel Preplate. The series is backward compatible with Sn/Pb soldering systems. The NNL05-9 has a Moisture Sensitivity Level (MSL) . The NNL05-0 has a Moisture Sensitivity Level (MSL) 2. For further information, please visit www.cd4power.com/rohs www.cd4power.com KDC_NNL05C.D02 Page 8 of 0 NNL05 Series Non-Isolated DC/DC Converters MECHANICAL DIMENSIONS SURFACE MOUNT PACKAGE STYLE (BOTTOM VIEW) PIN CONNECTIONS Pin  2 3 4 5 Function On/Off +VIN Common Trim +VOUT PACKAGE WEIGHT NNL05-9C NNL05-0C 2.3g 2.7g X (NNL05-9C) = 0.26(6.6) X (NNL05-0C) = 0.23(5.9) Coplanarity = 50microns RECOMMENDED PAD LAYOUT 0.90 (4.82) 0.60 (4.07) 0.60 (4.07) 0.90 (4.82) 5 4 3 0.350 (8.89) Pad size: MIN: 0.20 x 0.095 (3.048 x 2.43) MAX: 0.35 x 0.0 (3.429 x 2.794)  0.05 (.27) 0.690 (7.53) 2 TRAY DIMENSIONS (TOP VIEW) PICK-UP POINT NNL05-9 PICK-UP POINT NNL05-0 Tray quantity: 56 † +0.020(0.5) -0.00(0.0) Unless otherwise stated all dimensions in inches(mm) ±0.0(0.25). www.cd4power.com KDC_NNL05C.D02 Page 9 of 0 NNL05 Series Non-Isolated DC/DC Converters TAPE & REEL SPECIFICATIONS REEL OUTLINE DIMENSIONS TAPE OUTLINE DIMENSIONS REEL PACKAGING DETAILS Reel Quantity : 500 C&D Technologies (NCL) Limited reserve the right to alter or improve the specification, internal design or manufacturing process at any time, without notice. Please check with your supplier or visit our website to ensure that you have the current and complete specification for your product before use. © C&D Technologies (NCL) Limited 2006 KDC_NNL05C.D02 No part of this publication may be copied, transmitted or stored in a retrieval system or reproduced in any way including, but not limited to, photography, photocopy, magnetic or other recording means, without prior written permission from C&D Technologies (NCL) Limited. Instructions for use are available from www.cd4power.com C&D Technologies (NCL) Ltd Tanners Drive, Blakelands North Milton Keynes, MK4 5BU, UK Tel: +44 (0)908 65232 Fax: +44 (0)908 67545 email: MK@cdtechno.com C&D Technologies, Inc.  Cabot Boulevard, Mansfield, MA 02048-5, USA Tel: + (508) 339-3000 Fax: + (800) 233-2765 email: sales@cdtechno.com www.cd4power.com KDC_NNL05C.D02 Page 0 of 0