NTE1215M

NTE SERIES Isolated 1W Single Output SM DC-DC Converters SELECTION GUIDE Nominal Input Voltage Output Voltage Output Current Input Current at Rated Load Efficiency Isolation Capacitance MTTF1 O rd e rC o de 5 NTE0303M NTE0305M NTE0503M NTE0505M NTE0505ME NTE0509M (V) 3.3 3.3 5 5 5 5 5 5 12 12 12 12 (V) 3.3 5 3.3 5 5 9 12 15 5 9 12 15 (mA) 303 200 303 200 200 111 83 66 200 111 83 66 (mA) 410 390 270 294 260 267 260 256 124 114 113 111 (%) 73 78 74 68 77 75 77 78 67 73 74 75 (pF) 30 35 40 35 40 43 42 44 47 77 88 95 kHrs 1234 632 619 2418 419 1174 634 360 621 488 360 252 FEATURES s Wide Temperature Performance at Full 1 Watt Load, –40°C to 85°C s Lead Frame Technology s CECC00802 Reflow (280°C) s Single Isolated Output s 1kVDC Isolation s Efficiency to 78% s Power Density 1.8W/cm 3 s 3.3V, 5V & 12V Input s 3.3V, 5V, 9V, 12V and 15V Output s Footprint Over Pins 1.64cm 2 s UL 94V-0 Package Material s No Heatsink Required s Internal SMD Construction s Toroidal Magnetics s Plastic Encapsulated s MTTF up to 2.9 Million Hours s Custom Solutions Available s Multi Layer Ceramic Capacitors s Lead Free Compatible NTE0512M NTE0515M NTE1205M NTE1209M NTE1212M NTE1215M When operated with additional external load capacitance the rise time of the input voltage will determine the maximum external capacitance value for guaranteed start up. The slower the rise time of the input voltage the greater the maximum value of the additional external capacitance for reliable start up. INPUT CHARACTERISTICS Parameter Conditions MIN TYP MAX Units Voltage Range Reflected Ripple Current Continuous operation, 3.3V input types 2.97 Continuous operation, 5V input types 4.5 Continuous operation, 12V input types 10.8 3.30 5 12 30 3.63 5.5 V 13.2 47 mA p-p OUTPUT CHARACTERISTICS Parameter Conditions MIN TYP MAX Units Rated Power2 Voltage Set Point Accuracy Line regulation TA = -40°C to 85°C See tolerance envelope High VIN to low V IN 10% load to rated load, 0303M, 0305M, 0503M, 0505ME 10% load to rated load, 5V output types 10% load to rated load, 9V output types 10% load to rated load, 12V output types 10% load to rated load, 15V output types BW=DC to 20MHz, 0303M, 0305M, 0503M, 0505ME types BW=DC BW=DC BW=DC BW=DC to to to to 20MHz, 20MHz, 20MHz, 20MHz, 5V output types 9V output types 12V output types 15V output types 1.0 10 12.8 8.3 6.8 6.3 40 62 49 39 38 1.0 W 1.2 14 15 9.0 7.5 7.0 60 85 75 65 76 %/% Load Regulation 3 % DESCRIPTION The NTE series of miniature surface mounted DC-DC Converters employ leadframe technology and transfer moulding techniques to bring all of the benefits of IC style packaging to hybrid circuitr y. The devices are fully compatible with CECC00802 to 280°C which allows them to be placed and reflowed with IC’s, thus reducing time and cost in production. The co-planarity of the pin positions is based upon IEC 191-6:1990. The devices are suitable for all applications where high volume production is envisaged. Ripple and Noise mV p-p ABSOLUTE MAXIMUM RATINGS Short circuit duration 4 Internal power dissipation Lead temperature 1.5mm from case for 10 seconds Input Voltage VIN , NTE03 types Input Voltage VIN , NTE05 types Input voltage V IN , NTE12 types 1 2 3 4 5 1second 600mW 300°C 5.5V 7V 15V www.dc-dc.com Calculated using MIL-HDBK-217F with nominal input voltage at full load. See derating curve. 12V input types have typically 3% less load regulation change. Supply voltage must be discontinued at the end of the short circuit duration. If components are required in tape and reel format suffix order code with -R, e.g. NTE0505M-R All specifications typical at TA =25°C, nominal input voltage and rated output current unless otherwise specified. NTE SERIES Isolated 1W Single Output SM DC-DC Converters ISOLATION CHARACTERISTICS Parameter Conditions MIN TYP MAX Units Isolation Test Voltage Resistance Flash tested for 1 second Viso=1000VDC 1000 10 VDC GΩ GENERAL CHARACTERISTICS Parameter Conditions MIN TYP MAX Units Switching Frequency All variants 110 kHz TEMPERATURE CHARACTERISTICS Parameter Conditions MIN TYP MAX Units Specification Storage Case Temperature above ambient Cooling All output types 0303M, 0305M, 0503M, 0505ME 0505M, 1205M All other output types Free air convection –40 –55 30 40 40 85 125 °C °C °C PERFORMANCE CHARACTERISTICS tolerance envelope (3.3V output types) +9% +1% VNOM -7% +5% TEMPERATURE DERATING tolerance envelope (all other types) +10% 2.0 +2.5% -2.5% -7.5% +1% -7% -15% VNOM 1.5 1.0 0.5 0 Safe Operating Area 85°C -40 10 25 50 75 Output Load Current (%) 100 10 25 50 75 Output Load Current (%) 100 0 50 100 Ambient Temperature (°C) 150 MECHANICAL DIMENSIONS 12.70 7 .62 14 12 10 8 DETAIL A REFERENCE PLANE P 0.5 11.20 7.70 10.40 NTE0505M XYYWW 1 3 5 7 1.50 1.20 10 PINS 0.65 0.2 M S 0.55 P 2.10 ±5.00° 2.54 PIN 1 GND 3 VIN 5 NA 7 0V 8 +V 10 NA 12 NA 14 NA NA – Not available for electrical connection 6.60 (6.35) (5.95) 5.85 2.79MAX 0.1 S 0.25 0.10 1.875 MAX DETAIL A S SEATING PLANE 0.30 0.20 Weight: 1.21g All dimensions in mm XX.XX ±0.25mm. All pins on a 2.54mm pitch. C&D Technologies (NCL) Limited reserve the right to alter or improve the specification, internal design or manufacturing process at any time, without notice. Please check with your supplier or visit our web site to ensure that you have the current and complete specification for your product before use. © C&D Technologies (NCL) Limited 2001 NDC NTE.4 No part of this publication may be copied, transmitted or stored in a retrieval system or reproduced in any way including, but not limited to, photography, photocopy, magnetic or other recording means, without prior written permission from C&D Technologies (NCL) Limited. Instructions for use are available from www.dc-dc.com C&D Technologies (NCL) Ltd Tanners Drive, Blakelands North Milton Keynes MK14 5BU, England Tel: +44 (0)1908 615232 Fax:+44 (0)1908 617545 email: info@cdtechno-ncl.com www: http://www.dc-dc.com C&D Technologies (NCL), Inc. 5816 Creedmoor Road, Raleigh NC 27612, USA Tel: +1 (919) 571-9405 Fax: +1 (919) 571-9262 email: info@us.cdtechno-ncl.com