PWR4016

PWR40XX SERIES DC/DC CONVERTER POWER: 4 Watt LOW COST UNREGULATED SIZE: 1.125" X 1.125" X 0.40" POWER ELECTRONICS DIVISION www.cdtechno.com click on Power Electronics PRODUCT DATA SHEET DESCRIPTION The PWR40XX Series offers a low-cost alternative for some of the most popular DC/DC converters industry wide. Each model has a high-isolation version and an outstanding demonstrated MTTF of 5,000,000 hours at 25°C. The superior reliability and low cost make it an excellent choice for industry standard usages. The series includes thirteen standard models (other input and output voltages are available upon request), all set in a flexible encapsulation material which has excellent thermal dissipation and low mechanical stress on internal components. The use of surface-mount devices and manufacturing processes, combined with the encapsulation process, provides the user a product that is environmentally rugged. The PWR40XX has full isolation between input and output to give the designer maximum flexibility in grounding options and polarity configurations. The outputs are protected against momentary short circuits. FEATURES LOW COST INDUSTRY-STANDARD PACKAGE SINGLE AND DUAL OUTPUTS INTERNAL INPUT AND OUTPUT FILTERING HIGH ISOLATION VOLTAGE OPTION AVAILABLE MECHANICAL Notes: All dimensions are in inches (millimeters). GRID: 0.100 inches (2.54 millimeters) *Common pins not present on single output models. PIN PLACEMENT TOLERANCE: ± 0.015" Marked with: specific model ordered, date code, job code. MATERIAL: Units are encapsulated in a low thermal resistance molding compound which has excellent chemical resistance, wide operating temperature range, and good electrical properties under high humidity environments. The encapsulant and outer shell of the unit have UL94V-0 ratings. Lead material is brass with a solder plated surface to allow ease of solderability. PIN # 1 2 3 4 5 FUNCTION +VIN –VIN +VOUT * Common –Vout TOP VIEW SIDE VIEW PWR40XX BOTTOM VIEW PWR40XX 5/2001 REV E Page 1 ELECTRICAL SPECIFICATIONS Specifications typical at TA = +25°C, nominal input voltage and rated output current unless otherwise specified. MINIMUM INPUT VOLTAGE (VDC) 4.5 4.5 4.5 10.2 10.2 10.2 10.2 12.75 12.75 12.75 20.40 20.40 20.40 NOMINAL INPUT VOLTAGE (VDC) 5 5 5 12 12 12 12 15 15 15 24 24 24 MAXIMUM INPUT VOLTAGE (VDC) 5.5 5.5 5.5 13.8 13.8 13.8 13.8 17.25 17.25 17.25 27.6 27.6 27.6 RATED OUTPUT VOLTAGE (VDC) 5 ±12 ±15 5 12 ±12 ±15 5 ±12 ±15 5 ±12 ±15 RATED OUTPUT CURRENT (mA) 800 ±170 ±135 800 340 ±170 ±135 800 ±170 ±135 800 ±170 ±135 INPUT CURRENT NO RATED LOAD LOAD (mA) (mA) 50 50 50 35 35 35 35 30 30 30 30 30 30 950 950 950 400 400 400 400 300 300 300 180 180 180 REFLECTED RIPPLE CURRENT (mAp-p) 20 20 20 30 30 30 40 40 40 40 40 40 40 MODEL PWR4000 PWR4004 PWR4005 PWR4006 PWR4007 PWR4010 PWR4011 PWR4012 PWR4016 PWR4017 PWR4018 PWR4022 PWR4023 Other input and output voltage options may be available. Please contact factory. COMMON SPECIFICATIONS Specifications typical at TA = +25°C, nominal input voltage and rated output current unless otherwise specified. PARAMETER ISOLATION (Standard) Rated Voltage Test Voltage Resistance Capacitance Leakage Current ISOLATION (–HV Option) Rated Voltage Test Voltage Resistance Capacitance Leakage Current OUTPUT Rated Power Voltage Setpoint Accuracy Temperature Coefficient Ripple & Noise Voltage CONDITIONS MIN 500 500 10 50 5 TYP MAX UNITS VDC Vpk GW pF µArms 60Hz, 10 seconds VISO = 240VAC, 60Hz 1000 3000 60Hz, 60 seconds VISO = 240VAC, 60Hz 10 50 5 15 VDC Vpk GΩ pF µArms Rated Load, Nominal VIN BW = DC to 10MHz BW = 10Hz to 20MHz No Load, VOUT = + 5V No Load, VOUT = ±12V No Load, VOUT = ±15V 4.0 ±3 ±0.02 140 10 +7, -5 7 ±15 ±18 1.0 See Curves Line Regulation Load Regulation GENERAL Switching Frequency Package Weight MTTF per MIL-HDBK-217 Rev. E * Efficiency TEMPERATURE Specification Operation Storage W % %/°C mVp-p mVrms VDC VDC VDC %/%VIN Circuit Stress Method 170 16 5,000,000 80 kHz g Hr % 0 –25 –40 +25 +70 +85 +100 °C °C °C Page 2 PWR40XX 5/2001 REV E ABSOLUTE MAXIMUM RATINGS Output Short-Circuit Duration ...................................................... 1 second Internal Power Dissipation .............................................................. 850mW Lead Temperature (soldering, 10 seconds max) ............................ +300°C ORDERING INFORMATION PWR Device Family PWR indicates DC/DC converter Model Number Selected from Table of Electrical Characteristics High Voltage Option No Designator Indicates Standard Model Optional Screening 40XX -HV /H TYPICAL PERFORMANCE CURVES TA = +25°C, Rated Input Voltage, rated Output Current unless otherwise noted. PWR40XX 5/2001 REV E Page 3 TYPICAL PERFORMANCE CURVES TA = +25°C, rated input voltage, rated output current unless otherwise noted. APPLICATION NOTES SHORT CIRCUIT PROTECTION To maintain low cost, the PWR40XX Series provides limited short-circuit protection. To protect against continuous short circuits, a fuse is required. It is recommended that the fuse be placed in series with the input of the converter. The required I2 t will vary with input voltage. OUTPUT POWER The PWR40XX series was designed to meet power requirements up to 4W. Due to the nature of unregulated power supplies, a higher-than-rated output voltage will result when less-than-rated power is used (see Typical Performance Curves). This series has been designed to run from no load to 4W without derating up to +70°C. UNBALANCED LOADS Unbalanced loads may be used on dual output models with each side sourcing up to 200mA as long as the total power out is not more than 4W. With an unbalanced load, the output voltages will track within 5% of each other. OUTPUT NOISE The output noise can be reduced to less than 50mVp-p by adding a low ESR 10µf tantalum capacitor across each output. Input Voltage 5V 12V 15V 24V Littlefuse© Part Number 229.015 229.500 229.375 229.250 TABLE I. Recommended Fuses (or Equivalent). Power Electronics Division, United States 3400 E Britannia Drive, Tucson, Arizona 85706 Phone: 800.547.2537 Fax: 520.770.9369 C&D Technologies, (NCL) Tanners Drive Blakelands North Milton Keynes MK14 5BU UK Tel: +44 (0)1908 615232 Fax: +44 (0)1908 617545 Power Electronics Division, Europe C&D Technologies (Power Electronics) Ltd. 132 Shannon Industrial Estate, Shannon, Co. Clare, Ireland Tel: +353.61.474.133 Fax:+353.61.474.141 Any data, prices, descriptions or specifications presented herein are subject to revision by C&D Technologies, Inc. without notice. While such information is believed to be accurate as indicated herein, C&D Technologies, Inc. makes no warranty and hereby disclaims all warranties, express or implied, with regard to the accuracy or completeness of such information. Further, because the product(s) featured herein may be used under conditions beyond its control, C&D Technologies, Inc. hereby disclaims all warranties, either express or implied, concerning the fitness or suitability of such product(s) for any particular use or in any specific application or arising from any course of dealing or usage of trade. The user is solely responsible for determining the suitability of the product(s) featured herein for user’s intended purpose and in user’s specific application. C&D Technologies, Inc. does not warrant or recommend that any of its products be used in any life support or aviation or aerospace applications. Page 4 PWR40XX 5/2001 REV E