PWR5911

Product Data Sheet .5 - 1.0 WATT DUAL-IN-LINE REGULATED DC/DC CONVERTER PWR59XX DESCRIPTION The PWR59XX Series offers an extensive selection of input and output voltage combinations to choose from, including a 9V output for Cheapernet local area networking. Both single and dual output voltages are available. These miniature, regulated DC/DC converters come in a 24-pin dual-in-line package for applications where space is a concern. The small size is possible through the use of surface mounted devices and manufacturing technologies. SMT processes and components also make it possible to offer the Series with no power derating over an extended temperature range of –25°C to +85°C. A push-pull input stage ensures fixed frequency, nonsaturating operation of the oscillator section of the PWR59XX Series. MOSPOWER transistors are used as high speed switching elements. These rugged devices provide higher frequency to 500kHz operation, and uncomplicated drive circuitry. Reduced component count means higher reliability. High frequency operation means smaller magnetics. Higher isolation voltages are possible, due to the section wound transformer. Higher frequency operation also means less noise generation within the system’s bandwidth. Linear regulators, used in the output stage, output voltage variations due to line and load changes, also provide shortcircuit current limiting and thermal overload protection. SIDE VIEW FEATURES High Reliability 24-Pin DIP Package Internal Input and Output Filtering Short-Circuit Current Limiting Thermal Overload Protection Built-In Standoffs Industry Standard Pinout MECHANICAL TOP VIEW PIN CONNECTIONS PIN # SINGLES DUALS .805±0.010" (20.45) 0.400±0.010" (10.16) PWR59XX .010±0.005" (0.25) 0.170 " (4.32) 1 2 3 10 11 12 13 14 15 22 23 24 +V IN NC NC –VOUT +V OUT –V IN –V IN +V OUT –VOUT NC NC +V IN +V IN –VOUT Common Common +V OUT –V IN –V IN +V OUT Common Common –VOUT +V IN 1.270±0.010" (32.26) 0.100±0.015" (2.54) 12 3 .020±0.002" (0.51) 10 11 12 MIN MATERIAL: Units are encapsulated in a low thermal resistance molding compound which has excellent chemical resistance, wide operating temperature range, and good electrical properties under high humidity environments. The encapsulant and outer shell of the unit have UL94V-0 ratings. Lead material is brass with a solder plated surface to allow ease of solderability. 24 23 22 15 14 13 BOTTOM VIEW NC = Do Not Connect Duplicate pin functions are internally connected. All dimensions are in inches (millimeters). GRID: 0.100 inches (2.54 millimeters) PIN PLACEMENT TOLERANCE: ± 0.015" Marked with: specific model ordered, date code, job code. Any data, prices, descriptions or specifications presented herein are subject to revision by C&D Technologies, Inc. without notice. While such information is believed to be accurate as indicated herein, C&D Technologies, Inc. makes no warranty and hereby disclaims all warranties, express or implied, with regard to the accuracy or completeness of such information. Further, because the product(s) featured herein may be used under conditions beyond its control, C&D Technologies, Inc. hereby disclaims all warranties, either express or implied, concerning the fitness or suitability of such product(s) for any particular use or in any specific application or arising from any course of dealing or usage of trade. The user is solely responsible for determining the suitability of the product(s) featured herein for user’s intended purpose and in user’s specific application. C&D Technologies, Inc. does not warrant or recommend that any of its products be used in any life support or aviation or aerospace applications. PWR59XX 7/99 REV A Page 1 ELECTRICAL SPECIFICATIONS Specifications typical at TA = +25°C, nominal input voltage, and rated output current unless otherwise specified. NOMINAL INPUT VOLTAGE MODEL PWR5900 PWR5901 PWR5902 PWR5903 PWR5904 PWR5905 PWR5906 PWR5907 PWR5908 PWR5909 PWR5910 PWR5911 PWR5912 PWR5913 PWR5914 PWR5915 PWR5916 PWR5917 PWR5918 PWR5919 PWR5920 PWR5921 PWR5922 PWR5923 PWR5924 PWR5925 PWR5926 PWR5927 (VDC) 5 5 5 5 5 5 5 12 12 12 12 12 12 12 15 15 15 15 15 15 15 24 24 24 24 24 24 24 RATED OUTPUT VOLTAGE (VDC) 5 9 12 15 ±5 ±12 ±15 5 9 12 15 ±5 ±12 ±15 5 9 12 15 ±5 ±12 ±15 5 9 12 15 ±5 ±12 ±15 RATED OUTPUT CURRENT (mA) 100 111 83 67 ±50 ±42 ±33 100 111 83 67 ±50 ±42 ±33 100 111 83 67 ±50 ±42 ±33 100 111 83 67 ±50 ±42 ±33 INPUT CURRENT NO LOAD (mA) 40 40 40 40 40 40 40 35 35 35 35 35 35 35 30 30 30 30 30 30 30 15 15 15 15 15 15 15 RATED LOAD (mA) 175 345 345 345 175 345 345 100 170 150 150 76 150 150 76 135 120 120 60 120 120 43 83 73 73 40 73 73 REFLECTED RIPPLE CURRENT (mAp-p) 10 10 10 10 10 10 10 30 30 30 30 30 30 30 20 20 20 20 20 20 20 10 10 10 10 10 10 10 RATED OUTPUT POWER (mW) 500 1000 1000 1000 500 1000 1000 500 1000 1000 1000 500 1000 1000 500 1000 1000 1000 500 1000 1000 500 1000 1000 1000 500 1000 1000 EFFICIENCY (%) 57 57 57 57 57 57 57 42 49 55 55 55 55 55 44 50 55 55 55 55 55 48 50 55 55 55 60 60 Note: Other input to output voltages may be available. Please consult factory. COMMON SPECIFICATIONS Specifications typical at TA = +25°C, nominal input voltage, and rated output current unless otherwise specified. PARAMETER INPUT Input Voltage Range CONDITIONS MIN 4.75 11.4 14.25 22.8 750 750 10 50 4 ±5 ±0.02 50 5 10 ±0.3 ±0.4 500 200 900 11 –25 –40 –40 +25 +85 +100 +110 TYP 5 12 15 24 MAX 5.25 12.6 15.75 25.2 UNITS VDC VDC VDC VDC VDC Vpk GW pF µArms % %/°C mVp-p mVrms mVp-p % % kHz kHz kHr g °C °C °C ISOLATION Rated Voltage Test Voltage Resistance Capacitance Leakage Current OUTPUT Voltage Setpoint Accuracy Temperature Coefficient Ripple & Noise (BW = DC to 20MHz) Line Regulation Load Regulation GENERAL Switching Frequency MTTF per MIL-HDBK-217, Rev. E* Package Weight TEMPERATURE Specification Operation Storage 60 Hz, 10 Seconds VISO = 240VAC, 60Hz Rated Load, Nominal VIN No External Components 10µF Across Each Output 10µF Across Each Output No Load to Rated Load All Models Except 24VIN 24VIN Models 20 ABSOLUTE MAXIMUM RATINGS Output Short-Circuit Duration ................................................... Continuous Internal Power Dissipation .................................................................. 1.5W Lead Soldering Temperature (10seconds, max) ............................ +300°C Power Electronics Division, United States 3400 E Britannia Drive, Tucson, Arizona 85706 Tel: 800.547.2537 Fax: 520.770.9369 Page 2 ORDERING INFORMATION Device Family PWR Indicates DC/DC Converter Model Number Selected from Table of Electrical Characteristics Screening Option PWR 59XX /H C&D Technologies, (NCL) Milton Keynes MK14 5BU UK Tel: +44 (0)1908 615232 Fax: +44 (0)1908 617545 PWR59XX 7/99 REV A