TPS_RM4875

Contact Factory for Replacement Model Input Specifications Parameter Operating Range Current Conditions 45 - 65 Hz, single phase, no taps required 106 VAC 208 VAC 240 VAC Min 106 Typ 4.6 2.55 2.12 84 Max 264 Units VAC A A A % Efficiency Power Factor Correction (PFC) >.99 MEASUREMENTS OF RM4875 Module Weight Height Depth Width Shelf* Weight Height Depth Width 2.88 lbs. 2.4” 11.0” 4.75” 15.5 lbs. 3.5” with rectifiers mounted in shelf 12” maximum 23” rack mount * These measurements are specifically for the AGM25 List 1 up to 8 quantity RM 487.5. Please contact factory for other shelf and power plant options. GENERAL FEATURES Hot Swappable Modules These shelf-mounted modules are easy and safe to install or remove while system is operational without affecting the overall system’s performance. Parallel Operation and Automatic Load Sharing Forced share connection is made via a hard wire. Sharing is within ±10% of the average current for the load applied. Remote Control Enable Signal The rectifier’s output voltage control may be changed from internal float and equalize pots to external remote control though a digital ground signal. Current Limit Upon reaching 110% of rated current, the rectifier will automatically limit the current down to short circuit conditions with no fold back. Safety UL/CUL Approved: UL 1950/CSA 950. File Number: E131694 Status Indicator RFA Remote Control Equalize Front Panel Current Test Jacks Normal Page 2 RM4875 4/98 REV A Output Specifications Parameter Voltage Adjustment Range float voltage Regulation Load Current Hold-Up Time Filtering Voice band Wide band noise ENVIRONMENTAL Temperature Operating Storage Humidity Altitude Heat Dissipation Audible Noise non-condensing equalize voltage 0-100% load within specified input voltage and frequency range within a 10 - 100% rating nominal AC line 48 52 ± .5 ±10 >16 < 32