TX1000

Corporate: www.cdtechno.com Corporate: www.cdtechno.com Product: www.cdpoweronline.com TX1000 1000 Watt, Single Output, AC/DC Power Supply z z z z z Harmonic Correction to EN61000-3-2 Wide Range Input of 90-264VAC FCC / CISPR 22 Class A EMI Filtering Typical Power Factor of 0.99 Active Current Sharing ng z z z z z z Self-Cooled 5”x 4.88”x 12” Chassis 70-80% Efficiency Optional ORing Diode UL/CUL 1950, VDE EN60950 CE Marked EN61000-4 Immunity l single-output, Th TX1000 Series of single-outp t The TX1000 Series of single-o put, 0 i gle-ou put a stm adjust deadjustment, active current sharing, 1kW power supplies are fully featured W power supplies are fully featured e y t Mo remote inhibit, power fail warning, DC remot te n for worldwide. em ctive active for for usage worldwide. With acti o worldw de. With ae r dwide. OK signal, and thermal shutdown. A si lac Correction F Power Factor Correction (PFC) Power Factor Correctio (PFC) to o Rep e input of 90- complete arrayisof output voltages from EN61000-3-2, wide-range in EN61000-3-2, wide-range inpu N61000-3-2, N6 y for i 2.5 to 48VDC available. The selfr 264VAC, compliance 264VAC 2c4VAC, EMI complian to FCC and 6 tVAC co ompliance cooled 5” x 4.88” x 12” chassis provides ao F C P 2, “CE” Mark, CISPR tact CISPR 22, “CE M and immunity industry-standard modularity that Con EN61000-4, the TX1000 series is to EN6 o EN6100 6 permits optimum flexibility in ready for global deployment. Standard installation. An optional ORing diode is features include remote sense offered on all models greater than 5VDC compensation, output voltage models. PRODUCT SELECTION CHART MODEL TX10005AASLPLNH TX10005BASLPLNH (1) (1) OUTPUT VOLTAGE 5.0 12.0 15.0 18.0 24.0 28.0 36.0 48.0 20.0 (1) OUTPUT CURRENT 200A 84A 67A 56A 42A 36A 28A 21A 50A 182A 200A TX10005CASLPLNH TX10005DASLPLNH(1) TX10005EASLPLNH TX10005FASLPLNH (1) (1) (1) TX10005GASLPLNH TX10005HASLPLNH(1) TX10005JASLPLNH (1) TXD10005KASLPLNH TXD10005LASLPLNH 3.3 2.5 (1) Notes: (1) Model specified without optional ORing diode; to specify the diode option, replace the letter “N” with the letter “D”, no O-Ring diode on 5V models. TX1000 Rev D 1/2003 INPUT SPECIFICATIONS PARAMETERS Operating Range Input Current Inrush Current Efficiency Holdup Power Factor CONDITIONS 47-63Hz Nominal line, full load 120VAC, 250C, cold start 240VAC, 250C, cold start Nominal line, full load Full load (1) MIN 90 TYP MAX 264 12 80 160 80 UNITS VAC A Apk Apk % msec 70 20 75 0.99 Full load Notes: (1) Harmonic currents meet EN61000-3-2 OUTPUT SPECIFICATIONS PARAMETERS Output Power Voltage Adjustment Range Output Regulation Minimum Load PARD Temperature Coefficient CONDITIONS All environmental and line conditions Relative to nominal output voltage Line and load (each) Measured at output terminals, 20MHz 0MHz Hz 00 to 500C MIN TYP +5 +0.2 0 1 +0 +0 +0.2 +0.2 MAX 1000 UNITS Watts % % Amps % pk-pk %/0C PARAMETERS Ambient Temperature (Operating) Ambient Temperature Altitude (Operating) Altitude (Non-operating) Shock Vibration Cooling 0 +70 -50 +85 -200 +10,000 -200 +50,000 Per MIL-STD-810D, Method 516.3, Procedure II, in each axis, including NTSA drop test Per MIL-STD-810D, Method 514.3, Procedure II, in each axis, including NTSA drop test The TX1000 is provided with an internal cooling fan. Non-operating Non-operatin CONDITIONS COND IO S CONDITIONS OND Output de-rated linearly to 50% of to 50% Output de-rated put de-rate rated capacity between 500C and 700C rated between ct ct Fa ta Con fo ENVIRONMENTAL SPECIFICATIONS ECIFICA ory MIN TYP MAX UNITS C C Feet Feet 0 0 pla r Re cem del t Mo en Product: www.cdpoweronline.com TX1000 Rev D 1/2003 2 PRODUCT FEATURES FEATURES Remote Sense Active Current Sharing ORing Diode OVP Thermal Shutdown DC OK Signal Power Fail Warning Signal Remote Inhibit CHARACTERISTIC 500mV compensation Single Wire; 5% tolerance if outputs are over 25% of rated load Optional on all models (not available on 5V model) 125% of nominal (+7.5%) Automatic Restart Logic “1” when output is within +3% of nominal Transition to Logic “0” at least 5msec before loss of output regulation Logic “0” applied will inhibit output (referenced to –Sense terminal) PRODUCT COMPLIANCES APPROVAL UL and cUL VDE FCC CISPR 22 EN61000-3-2 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 EN61000-4-8 CE Mark Notes: (1) UL1950, 3rd CHARACTERISTIC UL1950, 3rd Edition (1) EN60950 Class A requirements for conducted emissions Class A requirements for conducted emissions Harmonic Currents, Class A Electrostatic Discharge, Level 4 Radiated Immunity, Level 2 Electrical Fast Transients, Level 3 vel Input Surge Immunity, Level 3 y, evel Conducted Immunity Level 4 Immunity, munity, Immunity, Leve Magnetic Field Immunity, Level 2 gnetic F y, y, Level e Low Voltage Directiv L w Voltage Directive g rective e me lace Edition incorporates the requirements of CSA 1950.p on incorporates the requirements n ates th e Re r1950. y fo ctor t Fa tac RING INF Con ORDERING INFORMATION TX1000 el Mod nt MODEL DESIGNATION BASE MODEL Chassis: “5” = 5” x 4.88” x 12”; “M” = modified Output Voltage: See Chart below Input Filter: “A” designates Class A EMI filter Fan: “S” designates Standard Fan Remote Inhibit: “L” designates that Logic “0” applied inhibits output “P” designates Active Input Power Factor Correction with widerange input voltage of 90-264 VAC Power Fail Warning: “L” designates transition to Logic “0” upon loss of AC Output ORing diode: “N” = None; “D” = Diode Option DC OK: “H” designates that Logic “1” indicates a DC OK condition OUTPUT VOLTAGES A = 5V B = 12V C = 15V D = 18V E = 24V F = 28V G = 36V H = 48V J = 20V K = 3.3V L = 2.5V Product: www.cdpoweronline.com TX1000 Rev D 1/2003 3 MECHANICAL V ADJ J1 PIN 1 .19 MAX 3.000 1.00 8-32UNC-2B .25 MAX. SCREW PENETRATION 4 PLACES 1.22 AIR FLOW 6.375 ta Con ory Fact ct for R me lace ep l ode nt M 10 2 12.00 12.0 12.00 00 J1 9 1 .60 4.88 +.000 -.170 .315 TYP 1.85 J1 CONNECTOR AMP NO. 87579-2 OR EQUIVALENT 3.45 1.95 PIN FUNCTION NO. 1 2 3 4 5 6 7 8 9 10 REMOTE INHIBIT DC OK N/C N/C POWER FAIL CURRENT SHARE + SENSE N/C _ SENSE N/C 5.00 TB1 6-32 UNF-2A PHILSLOT TORQUE TO 9 INCH/LBS MAX. 3 PLACES 1/4 - 20 UNC-2A HEX HEAD SCREW 2 PLACES 1.60 1.00 Power Electronics Division, Americas 3400 E Britannia Drive, Tucson, Arizona 85706 Tel: 800.547.2537 Fax: 520.295.4197 C&D Technologies, EMEA/AP Milton Keynes MK14 5BU UK Tel: +44 (0)1908 615232 Fax: +44 (0)1908 617545 Any data, prices, descriptions or specifications presented herein are subject to revision by C&D Technologies, Inc. without notice. While such information is believed to be accurate as indicated herein, C&D Technologies, Inc. makes no warranty and hereby disclaims all warranties, express or implied, with regard to the accuracy or completeness of such information. Further, because the product(s) featured herein may be used under conditions beyond its control, C&D Technologies, Inc. hereby disclaims all warranties, either express or implied, concerning the fitness or suitability of such product(s) for any particular use or in any specific application or arising from any course of dealing or usage of trade. The user is solely responsible for determining the suitability of the product(s) featured herein for user’s intended purpose and in user’s specific application. C&D Technologies, Inc. does not warrant or recommend that any of its products be used in any life support or aviation or aerospace applications. Product: www.cdpoweronline.com TX1000 Rev D 1/2003 4