VKP100MT515

Corporate: www.cdtechno.com Product: www.cdpowerelectronics.com VKP100xT 100 Watt Triple Output Half Brick DC/DC Converter 18 - 40 & 33 - 75V Input Range 2.3" X 2.4" X 0.5" User Configurable as a Single, Dual or Triple Output Each Channel Independently Current Limited Excellent Cross Regulation 500VDC Channel to Channel Isolation High Efficiency: 88% Typical Fixed-Frequency Operation Operation to +100°C Baseplate Temperature 50µS Transient Recovery, 0-90% Load Step Primary & Secondary Remote On/Off Adjustable Output Voltage External Synchronization VKP100MT Series are Approved to UL/CUL1950, EN 60950 The VKP100xT Series are members of the VK high density DC/DC converter family. They are multiple output DC/DC converters offered in a 33-75 input voltage range. Their versatile architecture featuring fully isolated channels enables the system designer to utilize the converter in either a single, dual or triple output scheme without excessive minimum load requirements or cross regulation degradation. The VKP100xT's architecture results in an economical and practical solution for use in distributed power schemes for today's demanding telecommunication and electronic data processing applications requiring ground separation between noise sensitive digital logic and bipolar analog components. The VKP100xT's proprietary control circuity responds to 50-100% load steps in 35µSeconds to within 1% of nominal Vout. The peak deviation will not exceed 10% of Vout for pulsed load slew rates in excess of 75 Amps per microsecond. The VKP100xT is ideal for electronic data processing applications utilizing modern disk drives and low voltage microprocessors that require dynamic load current response while maintaining tight output voltage tolerances. PRODUCT SELECTION CHART INPUT VOLTAGE MODEL VKP100MT312 VKP100MT315 VKP100MT512 VKP100MT515 (VDC) 48 (33-75) 48 (33-75) 48 (33-75) 48 (33-75) V1 (±) 3.3 3.3 5.1 5.0 RATED VOUT (VDC) V2 (±) 12 15 12 15 V3 (±) 12 15 12 15 RATED MAXIMUM I OUT (A) V1(±) 30 30 20 20 V2(±) 4.2 3.4 4.2 2.0 V3(±) 4.2 3.4 4.2 2.0 SPECIFICATIONS, ALL MODELS Specifications are at TCASE = +40°C nominal input voltage unless otherwise specified. PARAMETER Input Fusing CONDITIONS MIN 33 TYP 48 60 MAX 10 75 370 UNITS A VDC mA dB A W mC mA mA INPUT Voltage Range Reflected Ripple Current Input Ripple Rejection Maximum Input Current No Load Power Dissipation Inrush Charge Quiescent Operating Current Primary On/Off Disabled Secondary On/Off Disabled Peak - Peak DC to 1KHz Output Power = 100W VIN = 30V POUT = 0, VIN, Min