VSX40MD23-1U

Corporate: www.cdtechno.com Corporate: www.cdtechno.com Product: www.cdpowerelectronics.com VSX40MD23 40 Watt Dual Output Quarter Brick DC/DC Converter 2.5V & 3.3V Dual Output 2.3" x 1.5" x 0.5" 89% Efficiency Low Output Noise Input Filtering Remote On/Off, Input Side Output Voltage Trim, +/-10% Fixed Frequency Operation -40C° to +100C° Baseplate Temp. Output Current Limit, Self-Start 1,500 Vdc Isolation, Input to Output UL/CUL 1950, EN60 950 36 to 75 Vdc Input Models Continuous Short Circuit Protection Non-latching Protection: Input Undervoltage Input Overvoltage Output Overvoltage Overtemperature Output Voltage Tracking at Turn-on and Turn-off No Minimum Load Current VSX40 VSX40-U APPLICATIONS Distributed Power Architectures Workstations EDP Equipment Telecommunications The VSX40 Series are dual output converters with a 36-75V input. The industry quarter-pak size of 2.3" x 1.5" x 0.5" coupled with 89% efficiency is an industry high-density breakthrough. These converters utilize Vx high density technology. This technology has been featured in our highly efficient VKP and VKA series now successfully in use worldwide. The very high 89% efficiency minimizes the requirement for OPTIONS Choice of Remote On/Off logic Configuration Heatsink Available for Extended Operation heat-sinking and the low output ripple minimizes the need for additional filtering. For maximum flexibility, power can be traded between outputs as required. The VSX40 series feature virtually all of the options required by design engineers but not at the competition’s typical additional price for each option. This multitude of features are standard on the VSX40 series. ADDITIONAL INFORMATION See Application Note DCAN-41 at www.cdpowerelectronics.com ABSOLUTE MAXIMUM RATINGS PARAMETER Input Voltage: VSX40MD23 I/O Isolation Voltage I/P to case O/P to case Operating Case Temperature SYMBOL MIN MAX UNIT Vi T -40 100 1500 1500 200 100 Vdc Vdc Vdc Vdc °C Product: www.cdpowerelectronics.com VSX40MD23 REV E 5/02 1 SPECIFICATIONS, ALL MODELS Specifications are at TCASE = +40°C nominal input voltage unless otherwise specified. PARAMETER Operating Input Voltage VSX40MD23 Maximum Input Current (Vi=0V to Vi max, Io=Io max) VSX40MD23 I/P Reflected Ripple Current No Load Input Current On/Off Activated Input Current SYMBOL Vi MIN 36 TYP 48 MAX 75 UNITS VDC INPUT Ii max IiNL IiQ 35 20 1.5 260 A mA p-p mA mA PARAMETER Output voltage (Note 1) Over all conditions of I/P voltage, load and temperature) 2.5 Vout (V2) 3.3 Vout (V1) Output Voltage Setpoint (Vi=48, Io 2=9A, Io 3=6A, Tc=25°C) 2.5 (V2) 3.3 (V1) Output Ripple and Noise Voltage (peak-to-peak, 100 MHz BW) 2.5 (V2) 3.3 (V1) Output Current (Total module O/P power should not exceed 40 Watts) 2.5 (V2) 3.3 (V1) Output Current Limit Inception (Vo=95% of Vo nom) 2.5 (V2) 3.3 (V1) Output Short Ckt Current (Max impedance across short circuit = 65mΩ) 2.5 Vo 3.3 Vo Efficiency (Vi=48V, Io2=8A,Io3=6A, Tc=40°C) Dynamic Response (∆Io/∆t=0.2A/µsec.Vi=48V, Tc=25°C, either O/P) Load change of 50% Io max; at any operating load up to Iomax or Pomax Peak Deviation outside settling point Under any conditions, the voltage of V1 will always be greater or equal to that of V2. SYMBOL MIN TYP MAX UNITS 2.5 Vo 3.3 Vo 2.375 3.225 _ _ 2.555 3.450 Vdc Vdc 2.5 Vo,set 3.3 Vo,set 2.450 3.310 2.510 3.390 Vdc Vdc _ _ _ _ _ _ 60 80 mv p-p mv p-p Io2 Io3 _ _ _ _ 16 12.12 A A Io2cli Io3cli 16.8 12.7 18.5 14.0 21.0 15.9 A A OUTPUT η 15 11 88 19 13.2 89 22 17 _ A A % – – 2 _ %Vo nom NOTE: 1. Worst case voltage conditions occur with full load drawn from one output only, zero being drawn from the other. For worst case voltages at less extreme loading conditions, consult the factory. Product: www.cdpowerelectronics.com VSX40MD23 REV E 5/02 2 PARAMETER Isolation Specifications Isolation Capacitance Isolation Resistance Feature Specifications Remote On/Off (open collector equivalent, signal referenced to -Vin terminal) VSx40MD23 Preferred Logic (negative) Logic Low - Module On Logic High - Module Off VSX40MD23-1 - Optional Logic (positive) Logic Low - Module Off Logic High - Module On Logic Low: At Von/off = 0V Turn On Time (Vo within 1% of steady state) From Application of Vin From Remote On/Off Activation) Input Undervoltage Lockout (Turn Off & Turn On Voltages Track) Turn On Turn Off Input Overvoltage Lockout (Turn Off & Turn On Voltages Track) Turn Off Turn On Output Overvoltage Set Point (Non-latching independent control loop) 2.5 Vo 3.3 Vo Overtemperature Shutdown Hysteresis Weight VSX40MD23, VSX40MD23-1 VSX40MD23-U, VSX40MD23-1U Output Trim Tie Trim to +2.5 Vo for trim down 2.5 Vo Tie Trim to O/P RTN for trim up 3.3 Vo 2.5 Vo 3.3 Vo SYMBOL _ _ MIN _ 10 TYP 1000 _ MAX _ _ UNITS pF MΩ Von/off Ion/off _ _ 0 _ _ 50 200 10 4 Vdc µA mSecs mSecs GENERAL _ _ 7 3 _ _ 30 27 33 30 36 33 Vdc Vdc _ _ 76 74.5 80 78.5 84 82.5 Vdc Vdc VO2OV clamp VO3OV clamp Tc 2.7 3.6 105 2.9 3.9 115 10 67 3.2 4.2 125 Vdc Vdc °C °C Grams VO2td VO3td VO2td VO3td _ _ _ _ -10 -10 10 10 _ _ _ _ % % % % Product: www.cdpowerelectronics.com VSX40MD23 REV E 5/02 3 MECHANICAL Dimensions are in inches (millimeters). Tolerances: x.xx in. + 0.02 in. x.xxx in. +0.01 in. 2.30 (58.42) CASE OUTLINE 0.144 (3.66) 4 PLACES .600 (15.24) 1.50 (38.10) .350 (8.89) .000 .350 (8.89) 1 2 3 7 6 5 4 .375 (9.53) .125 (3.18) .125 (3.18) .375 (9.53) 0.051 (1.30) 7 PLACES .600 (15.24) .750 (19.05) .50 (12.70) .150 (3.81) .000 .145 (3.68) .150 (3.81) 0.040 (1.02) 7 PLACES 2.000 (50.80) Pinout Key 1.200 (30.48) 1 2 3 4 5 6 7 +Vin On/Off -Vin +2.5 Vout O/P RTN Trim +3.3 Vout RECOMMENDED PCB HOLE PATTERN (VIEW OF PCB, THROUGH UNIT) NOTES: 1. Marked with: specific model ordered, date code, job code. 2. MATERIAL: Units are encapsulated in a low thermal resistance molding compound which has excellent chemical resistance and electrical properties in high humidity environments and over a wide operating temperature range. The encapsulant and outer shell of the unit have UL94V-0 ratings. Lead material is solder plated to allow ease of solderability. 3. IMPORTANT: When utilizing the PEM nuts for board mounting, it is required to follow guidelines in application note DCAN-41 available on the web at www.cdpowerelectronics.com. PIN 1 .150 (3.81) M3 THREAD 4 PLACES ORDERING INFORMATION To Find Model Number VSX40MD23 - 1 U Device Family VSX40MD23 (Quarter Brick, 40 Watt DC/DC) Logic: No Number = Preferred Logic (Negative); 1 = Optional Logic (Positive) Package No Letter = Encapsulated; U = Unencapsulated Model Numbers VSX40MD23 VSX40MD23-U VSX40MD23-1 VSX40MD23-1U Power Electronics Division, United States 3400 E Britannia Drive, Tucson, Arizona 85706 Tel: 800.547.2537 Fax: 520.295.4160 C&D Technologies, (NCL) Milton Keynes MK14 5BU UK Tel: +44 (0)1908 615232 Fax: +44 (0)1908 617545 Any data, prices, descriptions or specifications presented herein are subject to revision by C&D Technologies, Inc. without notice. While such information is believed to be accurate as indicated herein, C&D Technologies, Inc. makes no warranty and hereby disclaims all warranties, express or implied, with regard to the accuracy or completeness of such information. Further, because the product(s) featured herein may be used under conditions beyond its control, C&D Technologies, Inc. hereby disclaims all warranties, either express or implied, concerning the fitness or suitability of such product(s) for any particular use or in any specific application or arising from any course of dealing or usage of trade. The user is solely responsible for determining the suitability of the product(s) featured herein for user’s intended purpose and in user’s specific application. C&D Technologies, Inc. does not warrant or recommend that any of its products be used in any life support or aviation or aerospace applications. 2.000 (50.80) Product: www.cdpowerelectronics.com VSX40MD23 REV E 5/02 4