WPC03R24D15

Product Data Sheet 3 WATT REGULATED WIDE INPUT RANGE DC/DC CONVERTER WPC03R DESCRIPTION The WPC03R is a family of high performance DC/DC converters that offers regulated outputs over input voltage ranges of 9-18V, 18-36V and 34-72V while offering a wide operating temperature range of -40°C to +85°C without derating. Each WPC03R contains input filtering to minimize conducted noise. The design utilizes surface mounted components, including magnetics, to provide enhanced reliability. The converter is designed to meet the requirements of EN60950 with the “L” pinout having 1,500 VDC isolation. All WPC03R converters are designed to withstand input voltage transients to 200% of nominal input voltage. An additional feature is the ability of the WPC03R to drive high capacitive loads. FEATURES l l l l l l l l Low Cost, High Performance Small DIP Package Full Power to +85°C Extended Temperature Range: -40°C to +85°C Industry Standard Pinouts Full Short Circuit Protection High Capacitive Loading Capability Protected Against High Input Voltage APPLICATIONS l l l l l Telecommunications Battery Powered Systems Portable Instruments Transportation Equipment Distributed Power Systems SIMPLIFIED CIRCUIT SCHEMATIC Internet: http://www.cdpowerelectronics.com Power Electronics Division, United States 3400 E Britannia Drive, Tucson, Arizona 85706 Phone: 800.547.2537 Fax: 520.770.9369 Power Electronics Division, Europe C&D Technologies (Power Electronics) Ltd. 132 Shannon Industrial Estate, Shannon, Co. Clare, Ireland Tel: +353.61.474.133 Fax:+353.61.474.141 Page 1 WPC03R 2/99 REV A ABSOLUTE MAXIMUM RATINGS Output Short Circuit Protection ------------ Continuous Internal Power Dissipation --------------------------- 1.5W Lead Temp (soldering, 10s Max) ---------------- +300°C Max Case Temperature --------------------------- +100°C ELECTRICAL SPECIFICATIONS Specifications typical at TA=25°C, nominal input voltage, rated output current unless otherwise stated. Nominal Rated Input Output Voltage Voltage (Volts) (Volts) 12 12 12 12 12 12 24 24 24 24 24 24 48 48 48 48 48 48 5.0 12.0 15.0 +5.0 +12.0 +15.0 5.0 12.0 15.0 +5.0 +12.0 +15.0 5.0 12.0 15.0 +5.0 +12.0 +15.0 Output Current (mA) Min Load Rated Load (See Note 1) Model WPC03R12S05 WPC03R12S12 WPC03R12S15 WPC03R12D05 WPC03R12D12 WPC03R12D15 WPC03R24S05 WPC03R24S12 WPC03R24S15 WPC03R24D05 WPC03R24D12 WPC03R24D15 WPC03R48S05 WPC03R48S12 WPC03R48S15 WPC03R48D05 WPC03R48D12 WPC03R48D15 Max Input Current (mA) Rated Load 448 445 445 470 475 475 230 230 225 240 235 230 120 118 116 120 118 116 Max Capacitive Load (µF) Efficiency % 60 24 20 +30 +12 +10 60 24 20 +30 +12 +10 60 24 20 +30 +12 +10 600 250 200 +300 +125 +100 600 250 200 +300 +125 +100 600 250 200 +300 +125 +100 600 250 200 +300 +125 +100 600 250 200 +300 +125 +100 600 250 200 +300 +125 +100 77 80 81 74 76 77 74 75 76 73 74 75 74 75 76 75 76 77 NOTE 1: Although minimum load specifications are indicated for load measurement purposes, all models will operate under no-load conditions. ORDERING INFORMATION WPC03R xxyzz E Device Family Indicates wide input power 3W regulated DC/DC Model Number Selected from Table of Electrical Characteristics xx=input voltage y=number of outputs: S=single, D=dual zz=output voltage Pinout option E or L Page 2 WPC03R 2/99 REV A COMMON SPECIFICATIONS Specifications typical at TA=25°C, nominal input voltage, rated output current unless otherwise stated. Parameter Input Voltage Range Conditions Min 9 18 34 Typ 12 24 48 50 Max 18 36 72 Units Vdc Vdc Vdc mA p-p Reflected Ripple Current Isolation Safety Standards Rated Voltage Test Voltage—60 Hz, 10 secs Resistance Capacitance Leakage Current Output Rated Power Voltage Setpoint Accuracy Temperature Coefficient Line Regulation-singles Line Regulation-duals Load Regulation-singles Load Regulation-duals Ripple & Noise General MTTF per MIL-HDBK-217, Rev F Temperature Operation Storage Designed to meet requirements of EN60950, EN41003 & UL1950 “L” Pinout “E” Pinout “L” Pinout “E” Pinout 1500 1000 1500 1000 10 220 30 3 +3.0 +0.02 Viso=240Vac, 60 Hz Vdc Vdc Vpk Vpk GΩ pF µArms W % %/°C % % % % mV p-p Hours +85 +125 °C °C Low line to high line Low line to high line Min load to rated load Min load to rated load BW=5 Hz to 20 MHz TA=25° -40 -55 50 1,000,000 +1.5% +1.5% +2% +2% 100 WPC03R 2/99 REV A Page 3 MECHANICAL SPECIFICATIONS PINOUT “E” Pin Number 1 2 3 10 11 12 13 14 15 22 23 24 Pin Function Singles Duals +Vin +Vin No connection -Vout No connection Common -Vout Common +Vout +Vout -Vin -Vin -Vin -Vin +Vout +Vout -Vout Common No connection Common No connection -Vout +Vin +Vin PINOUT “L” Pin Number 2 3 9 11 14 16 22 23 Pin Function Singles Duals -Vin -Vin -Vin No connection No connection +Vout -Vout +Vin +Vin -Vin Common -Vout +Vout Common +Vin +Vin TECHNICAL INFORMATION Notes: 1. All dimensions in inches and (millimeters). 2. Units are encapsulated with a low thermal resistance molding compound which has excellent chemical resistance, wide operating temperature range and good electrical properties under high humidity environments. The encapsulant and outer shell have UL94V-0 ratings. Lead material is brass with a solder plated surface to allow ease of solderability. 3. GRID: 0.100 inches, (2.54 mm). 4. Pin Placement Tolerance: +0.015", (+.381 mm). The information provided herein is believed to be reliable; however, C&D TECHNOLOGIES assumes no responsibility for inaccuracies or omissions. C&D TECHNOLOGIES assumes no responsibility for the use of this information, and all use of such information shall be entirely at the user’s own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. C&D TECHNOLOGIES does not authorize or warrant any C&D TECHNOLOGIES product for use in life support devices/systems or in aircraft control applications. Page 4 WPC03R 2/99 REV A