WPC10R48S03

Product Data Sheet 2:1 WIDE INPUT RANGE DC/DC CONVERTER WPC10R DESCRIPTION The WPC10R is a family of high performance DC/DC converters that offer regulated outputs over two input voltage ranges of 18 - 36 and 28 - 75V and over a wide operating temperature range of -40°C to +100°C without derating. The 350kHz switching frequency and forward converter topology provide optimum performance in a spacesaving package. The design uses all surface mounted components, including magnetics, to provide enhanced reliability. All models will operate even under no-load conditions, although a minimum load is specified for load regulation measurement purposes. A metal package is utilized for decreased radiated noise and an optional remote enable feature allows low power standby operation. FEATURES G SAFETY APPROVALS (CULUS, CE) G MEETS EN55022 LEVEL A & B FOR CONDUCTED EMISSIONS WITH A 10 MFD EXTERNAL CAPACITOR G OPERATING TEMPERATURE RANGE: -40°C TO +100°C SIMPLIFIED G INDUSTRY STANDARD PINOUTS G INDUSTRY STANDARD PACKAGE G LOW PROFILE 0.4 INCH (10MM) G SHORT CIRCUIT PROTECTION G TEMPERATURE SHUTDOWN G REMOTE ON/OFF (OPTIONAL) G LOW RADIATED EMISSIONS CIRCUIT DIAGRAM CONTROL APPLICATIONS G G G G G G TELECOMMUNICATION APPLICATIONS BATTERY POWERED SYSTEMS PORTABLE INSTRUMENTS PROCESS CONTROL EQUIPMENT TRANSPORTATION EQUIPMENT DISTRIBUTED POWER SYSTEMS SHUTDOWN (OPTIONAL) OPTICAL ISOLATION AGENCY APPROVALS Internet: http://www.cdpowerelectronics.com Power Electronics Division, United States 3400 E Britannia Drive, Tucson, Arizona 85706 Phone: 800.547.2537 Fax: 520.770.9369 Power Electronics Division, Europe C&D Technologies (Power Electronics) Ltd. 132 Shannon Industrial Estate, Shannon, Co. Clare, Ireland Tel: +353.61.474.133 Fax:+353.61.474.141 Page 1 WPC10R 11/99 REV F ELECTRICAL SPECIFICATIONS Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified. NOMINAL INPUT VOLTAGE (VDC) 24 24 24 24 24 24 24 48 48 48 48 48 48 48 RATED OUTPUT VOLTAGE (VDC) 3.3 5 12 15 ±5 ±12 ±15 3.3 5 12 15 ±5 ±12 ±15 OUTPUT CURRENT MIN LOAD (mA) 300 200 83 67 ±100 ±42 ±33 300 200 83 67 ±100 ±42 ±33 RATED LOAD (mA) 3000 2000 833 666 ±1000 ±417 ±333 3000 2000 833 666 ±1000 ±417 ±333 VOLTAGE REGULATION LINE (±) 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% LOAD (±) 1% 1% 1% 1% 2% 2% 2% 1% 1% 1% 1% 2% 2% 2% NOISE (mVpp) 75 75 75 75 75 75 75 75 75 75 75 75 75 75 EFFICIENCY (%) 75 77 78 79 77 78 79 77 79 80 81 79 80 81 MODEL WPC10R24S03 WPC10R24S05 WPC10R24S12 WPC10R24S15 WPC10R24D05 WPC10R24D12 WPC10R24D15 WPC10R48S03 WPC10R48S05 WPC10R48S12 WPC10R48S15 WPC10R48D05 WPC10R48D12 WPC10R48D15 COMMON SPECIFICATIONS Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified. PARAMETER INPUT Voltage Range Reflected Ripple Current ISOLATION Test Voltage Resistance Capacitance Leakage Current OUTPUT Rated Power Voltage Setpoint Accuracy Temperature Coefficient Line Regulation Singles Duals Load Regulation Singles Duals Ripple & Noise GENERAL Switching Frequency MTTF per MIL-HDBK-217, Rev F Ground Benign Package Weight TEMPERATURE Specification (ambient) Specification (case) Operation (case) Storage 60 Hz, 10 Seconds 1500 10 1500 100 Vpk GΩ pF mArms CONDITIONS MIN 18 28 TYP 24 48 20 MAX 36 75 50 UNITS VDC VDC mAp-p VIN=34-75 for 3.3Vout VISO= 240VAC, 60Hz 10 ±1 ±0.02 Low Line to High Line ±0.2 ±0.2 Min Load to Rated Load ±0.2 ±0.5 BW = 5 Hz to 20 MHz 75 Watts % %/°C % % % % mVp-p 350 Circuit Stress Method, TA = +25°C 933 35 kHz khr g -25 -25 -40 -55 +71 +100 +100 +125 °C °C °C °C Page 2 WPC10R 11/99 REV F ABSOLUTE MAXIMUM RATINGS Output Short Circuit Protection (at TA = 25°C, nominal input voltage) ........................Continuous Internal Power Dissipation....... ........................................... 2.5W Lead Temperature (soldering 10seconds, max) ..............+300°C Maximum Case Temperature ...........................................+110°C ORDERING INFORMATION WPC10R Device Family Indicates Wide Input Voltage 10 Watt Regulated Unit Model Number Selected from Table of Electrical Characteristics xx = Input Voltage y = Number of Outputs (Single "S", Dual "D") zz = Output Voltage Case Ground Option "P" = Positive Input Connection "N" = Negative Input Connection "F" = Floating Input Connection Remote ON/OFF (optional) xxyzz N/P/F R MECHANICAL TOP VIEW SIDE VIEW NOTES: All dimensions are in inches (millimeters). Pin Connections 1 +Vin 2 -Vin 3 Remote On/Off 4 +Vout 5 Common 6 -Vout 4 GRID: 0.100 inches (2.54 millimeters) Pin Placement Tolerance: ±0.015 1 5* 2 * Common pins are not present on single output models Marked with: specific model ordered, date code, job code. 6 MATERIAL: Units are encapsulated in a low thermal resistance molding compound which has excellent chemical resistance, wide operating temperature range, and good electrical properties under high humidity environments. The encapsulant and outer shell of the unit have UL94V-0 ratings. Lead material is brass with a solder plated surface to allow ease of solderability. 3 BOTTOM VIEW THERMAL DERATING CURVE Hiweise: Geraet wird mit einer 2A Sicherung abgesichert Eingangspannung muss SELV oder TNV nach EN60950, IEC60950 entsprechen Ein-und Ausgang des Converters muessen mit dem Schutzleiter verbunden werden Power supply must be fused with a 2A fuse or current limited to 2A max Input must be SELV or TNV according to EN60950/ IEC950 One input and output pin must be tied to safety earth ground REMOTE ON/OFF CONTROL Logic Compatibility ...................................... CMOS or Open Collector TTL EC On ................................................................. Open Circuit or > 2VDC EC Off ........................................................................................ < 1.3VDC Shutdown Idle Current .....................................................................