CAT1232LP

catalyst semiconductor quality policy Catalyst Semiconductor’s Quality Policy is to provide customers with high quality, leading edge non-volatile memory based products. In addition to providing high quality products, Catalyst strives to promote customer satisfaction, emphasizes the prevention of non-conformances and continually pursues improvements in its company-wide operations. green package program Catalyst Semiconductor made the commitment in Q4 2002 to deliver volume production of lead-free, halogen-free “Green” package integrated circuits. Catalyst offers “Green” packages for its complete product offering of analog and mixed-signal ICs, as well as serial and parallel EEPROM memory. The “Green” Package Program is a total system solution encompassing lead plating, package compound and die attach epoxy technology. Catalyst continues to meet the requirements of regulatory agencies world wide: • Waste from Electrical and Electronics Equipment (WEEE) • Japanese Ministry of International Trade and Industry • Japan Electrical Insulating Materials Association • European Union Directives H LOGEN FR A EE LE A D F R E ETM All Line Items Are Link To Appropriate Pages Catalyst Semiconductor Product Guide 2005 Contents cover cover 2 3 4 6 6 7 8 8 8 9 10 12 13 14 15 16 17 18 19 22 23 23 23 24 cover cover quality policy green package program introduction mixed signal product chart • white led drivers featured products product list application literature / evaluation and demonstration boards • dc-dc converters featured products product list application literature / evaluation and demonstration boards • low voltage shunt regulators product list • µP supervisory circuits featured products product list 2 • i c and smbus i/o port expanders featured products product list • digitally programmable potentiometers featured products product list application literature / evaluation and demonstration boards memory product chart • serial eeproms featured products product list application literature / evaluation and demonstration boards • parallel eeproms product list • flash product list • nvram product list package information customer satisfaction & technical support company product policies introduction Founded in 1985, Catalyst Semiconductor, Inc. is headquartered in Sunnyvale, California. Catalyst is a leading supplier of high performance analog/ mixed-signal solutions and nonvolatile memory products used in automotive, aircraft, telecommunications, computation, industrial and consumer markets. Catalyst designs and markets a broad range of analog/mixed-signal products such as White LED Drivers, DC-DC converters, GPI/O expanders, Digitally Programmable Potentiometers (DPP™),Microcontroller Supervisory circuits and other analog/mixed-signal products.Programmable products include Serial and Parallel EEPROMs with I2C, SPI and Microwire interfaces, as well as NVRAM and low density Flash Memories. Typical applications include LCD displays, digital cameras, cell phones, automotive instrumentation, modems, wireless LANs, network cards, DIMM modules, digital satellite box receivers, set-top boxes and Internet routers. Catalyst’s Quality Management System is ISO 9001:2000 certified. For additional information about Catalyst Semiconductor, visit our website at: www.catsemi.com. White LED Drivers DC-DC Converters Low Voltage Shunt Regulators Mixed Signal µP Supervisors I2C Interface I/O Expanders Digitally Programmable Potentiometers (DPP™) CATALYST Technology Core Serial EEPROMs Parallel EEPROMs Memory Flash NVRAM GEN FR ALO EE 2 V isit our website for samples, data sheets, and additional product information. H LE A D F R E ETM mixed signal products White LED Drivers CAT310 CAT3200 CAT3200-5 CAT3604 CAT3604-A CAT3606 CAT3614 CAT3616 CAT3626 CAT4134 CAT4137 CAT4237 DC-DC Converters Charge Pumps CAT3200 CAT660 CAT3200-5 CAT661 Low Voltage Shunt Regulators CAT102 CAT431L µP Supervisors CAT809 CAT810 CAT811 CAT812 CAT1232LP CAT1832 CATALYST Technology Core Mixed Signal µP Supervisors with Memory CAT1021 CAT1022 CAT1023 CAT1024 CAT1025 CAT1026 CAT1027 CAT1161 CAT1162 CAT1163 CAT1320 CAT1321 CAT1640 CAT1641 I2C Interface I/O Expanders CAT9532 CAT9552 CAT9534 CAT9535 CAT9554 CAT9554A CAT9555 CAT7311 Digitally Programmable Potentiometers (DPP™) CAT5110 CAT5111 CAT5112 CAT5113 CAT5114 CAT5115 CAT5116 CAT5118 CAT5119 CAT5120 CAT5121 CAT5122 CAT5132 CAT5133 CAT521 CAT522 CAT5221 CAT523 CAT524 CAT5241 CAT525 CAT5251 CAT5259 CAT5261 CAT5269 CAT5401 CAT5409 CAT5411 CAT5419 H GEN FR ALO EE LE A D F R E ETM w w w. c at s e m i . c o m 3 white led drivers CAT3604 4-Channel Fractional Charge 4-Channel Fractional Charge Pump LED Driver Driver Features ■ automatically switches from 1x LDO mode to 1.5x boost mode ■ inductor-less design minimizes EMI interference Battery ■ drives up to 4 Parallel LEDs at 30mA per channel ■ very low input ripple and noise VIN ■ “zero” shutdown current extends battery life 3V to 4.2V ■ power efficiency up to 93% ■ optimized for use with Lithium-Ion battery systems Package Information ■ 16 pad TQFN (4x4mm, height 0.8mm max) C1+ VIN + EN CIN Control 0 Control 1 Control 2 EN CTR0 CTR1 CTR2 RSET RSET C1- C2+ C2VOUT COUT CAT3604 LED1 LED2 LED3 LED4 GND 20mA CAT3606 6-Channel Fractional Charge 6-Channel Fractional Charge Pump LED Driver Driver C1- Featured Products Featured Products C1+ C2C2+ 1x mode (LDO) 1.5x Charge Pump 3≤VIN≤4.2V VIN Battery + - CAT3606 VOUT COUT CIN Mode Control EN 1MHz Oscillator 1.2V Reference RSET Current Setting LED Output Selection GND LED1 LED2 LED3 LED4 LED5 LED6 Main Sub 6 Current Sink Regulators 20mA RSET ENM ENS Features Features ■ independent dimming and standby control for Main and Sub displays ■ automatically switches from 1x LDO mode to 1.5x boost mode ■ inductor-less design minimizes EMI interference 4 ■ drives up to 6 Parallel LEDs at 30mA per ■ short circuit detect/disable on all channels ■ optimized for use with Lithium-Ion battery systems channel ■ very low input ripple and noise ■ “zero” shutdown current extends battery life ■ power efficiency up to 90% Package Information ■ 16-pad TQFN (4x4mm, height 0.8mm max) H GEN FR ALO EE V isit our website for samples, data sheets, and additional product information. LE A D F R E ETM white led drivers CAT4237 High Voltage CMOS Boost White LED Driver Features ■ drives 8 white LEDs in series from 3V ■ low quiescent ground current 0.3mA ■ power efficiency over 84% ■ adjustable output current (up to 40mA) ■ high-frequency 1MHz operation ■ high voltage power switch ■ shutdown current less than 1 µA ■ load fault protection against open-circuits ■ tight line/load regulation Package Information ■ thin SOT23 5-lead (1mm max height) D1 VOUT VIN 3V to 4.2V C1 VIN L SW CAT4237 White LEDs 20mA SHDN VFB = 300mV FB GND CAT310 Automotive 10-Channel Serial Latched LED Driver Features ■ output drivers withstand load-dump transients up to 40V ■ operates over automotive temperature range: -40 to +125°C ■ drives 10 LEDs in parallel at 50mA per channel ■ output channels can drive a combination of white or color LEDs ■ serial output allows cascading of multiple CAT310’s to drive greater than 10 LEDs ■ operating voltage up to 17V ■ simple LED pattern programming through the 10 MHz serial interface ■ blank pin provides global on/off control of all LEDs ■ under Voltage Lockout ■ over Voltage Protection Package Information ■ 20-lead SOIC H GEN FR ALO Featured Products VBATTERY = 14V (typical) + VBATT 30mA RS OUT0 VBATT VCC RS RS RS VCC 5V + - CAT310 C1 SCLK XLAT BLANK SIN OUT1 OUT2 Controller OUT9 SOUT GND PGND EE LE A D F R E ETM w w w. c at s e m i . c o m 5 white led drivers PRODUCT LIST WHITE LED DRIVERs Packages (Pin Count)1 IOUT Per Channel 100mA 30mA 30mA 30mA 30mA 30mA 150mA 40mA 50mA MSOP SOIC Thin SOT23 (R, Z, GZ) (J, W, GW) (TS, TD, GTD) 8 6 16 16 16 16 16 16 5 20 TQFN TQFN (HS4, HV4, GV4) (HS3, HV3, GV3) (4 x 4 mm) (3 x 3 mm) Part Number CAT3200 CAT3604 CAT3604-A CAT3606 CAT3616 CAT3626 CAT4134 CAT4237 CAT310 LEDs (max) 6 4 4 6 6 6 6 10 10 VIN (typ) 2.7 - 4.5V 3.0 - 5.5V 3.0 - 5.5V 3.0 - 5.5V 3.0 - 5.5V 3.0 - 5.5V 2.5 - 4.5V 2.5-5.5V 3.0 - 5.5V Mode Charge pump Charge pump Charge pump Charge pump Charge pump Charge pump Inductor-boost Inductor-boost n/a Interface Logic: Shutdown 3-wire 3-wire 3-wire Parallel Parallel Logic: Shutdown Serial Serial APPLICATION LITERATURE / EVALUATION AND DEMONSTRATION BOARDS WHITE LED DRIVER APPLICATION NOTES Document Number AN12 AN14 AN15 AN17 AN20 AN22 AN23 Title CAT32DB1 Demonstration Board for CAT32 White LED Driver CAT32EVAL1 Evaluation Board for CAT32 White LED Driver CAT3200DB1 Board Hardware for the CAT3200 DC-DC Converter CAT37EVAL1 Evaluation Board for the CAT37 White LED Driver CAT3604EVAL1 Evaluation Board for the CAT3604 White LED Driver CAT310DB1 Demonstration Board for the CAT310 White LED Driver CAT3606EVAL1 Evaluation Board for the CAT3606 White LED Driver WHITE LED DRIVER DESIGN NOTE DN9 CAT32 White LED Driver Efficiency and Inductor Value Tradeoffs Note: 1. Available in standard and “green” packages. All product documentation can be found on the Catalyst Semiconductor web site at www.catsemi.com. 6 V isit our website for samples, data sheets, and additional product information. H GEN FR ALO EE LE A D F R E ETM dc-dc converters CAT3200/CAT3200-5 CAT3200/CAT3200-5 5V Output CNEG VIN IN CPOS OUT 5V VOUT 100mA CAT3200-5 + 3.3V ON OFF SHDN GND VOUT = 5V IOUT ≤ 50mA, for VIN ≥ 2.8V IOUT ≤ 90mA, for VIN ≥ 3V Adjustable Output CNEG VIN IN CPOS OUT VOUT 100mA R2 FB GND R1 Low Noise Regulated Charge Pump DC-DC Converter ow Regulated Charge Converter Features Features ■ regulated output voltage (5V xed CAT3200-5, adjustable CAT3200) (5V fixed CAT3200-5, adjustable CAT3200) ■ 100 mA output current ■ fixed high operating frequency at 2 MHz ■ input voltage operation down to 2.7 V ■ low quiescent current (1.7 mA typ) ■ low value external capacitors (1 µF) ■ low output ripple voltage, typical 30mV @ COUT = 1 µF ■ shutdown current less than 1 µA ■ foldback current overload protection ■ soft start, slew rate control ■ thermal overload shutdown protection Featured Products CAT3200 + 3.3V ON OFF SHDN Package Information Package ■ CAT3200 in MSOP-8 ■ CAT3200-5 in low profile (1mm thin) 6-lead TSOT23 ■ pin compatible with LTC3200 and LTC3200-5 R VOUT = 1.27 1+ 2 R1 ( CAT661 100mA CMOS Charge Pump Inverter/Doubler Features ■ converts V+ to V- or V+ to 2V+ ■ high power efficiency ■ industrial temperature range ■ low output resistance, 4Ω typical ■ low quiescent current ■ pin-compatible, high-current alternative to 7660/1044 ■ selectable charge pump frequency - 25kHz or 135kHz - enables optimum external capacitors Package Information ■ 8-pin SOIC, DIP and 0.8mm thin 8-pad TDFN ■ pin compatible with MAX660, LTC660 and LM2660 1 C1 + BOOST/FC CAP+ GND CAPV+ OSC LV OUT H GEN FR ALO LE A D F R E ETM ( +VIN 1.5V to 5.5V 8 7 6 5 Inverted Negative Voltage Output 2 3 4 CAT661 VOLTAGE INVERTER 1 C1 + BOOST/FC CAP+ GND CAP- V+ OSC LV OUT 8 7 6 5 2 3 4 Doubled Positive Voltage Output CAT661 VIN = 2.5V to 5.5V POSITIVE VOLTAGE DOUBLER EE w w w. c at s e m i . c o m 7 dc-dc converters / shunt regulators PRODUCT LIST DC-DC CONVERTERs Packages (Pin Count)1 Part Number CAT3200 CAT3200-5 CAT660 CAT661 Operating Modes 2xVIN 2xVIN Input Voltage 2.7-4.5V 2.7-4.5V Ground Output Current Current 1.6mA 1.6mA 0.3mA 0.3mA 100mA 100mA 100mA Switching Output Internal DIP Frequency Impedence Regulation (P, L, GL) 2MHz 2MHz 10/80kHz 10Ω 10Ω 4Ω 4Ω Yes Yes No No 8 8 8 8 MSOP (R, Z, GZ) 8 6 8 8 SOIC TSOT23 (S, V, GV) (TS, TD, GTD) TDFN (RD8, ZD8, GD8) (4 x 4 mm) 2xVIN , -1xVIN 1.5-5.5V 2xVIN , -1xVIN 1.5-5.5V 100mA 25/135kHz APPLICATION LITERATURE / EVALUATION AND DEMONSTRATION BOARDS Document Title Number AN15 AN18 CAT3200DB1 Board Hardware for the CAT3200 DC-DC Converter CAT660EVAL1 Evaluation Board for the CAT660 Charge Pump Voltage Converter PRODUCT LIST LOW VOLTAGE SHUNT REGULATORs Reference Voltage Across Temp2 Part Number CAT102 CAT431L Reference Voltage (V) 0.6 1.24 Min 0.588 1.228 Max 0.612 1.252 Initial Accuracy +1% +0.5% Packages (Pin Count)1 SOT23 (TP, TB, GTB) 5 3, 5 3 TO-92 (TN, TL, GTL) Notes: 1. Available in standard and “green” packages. 2. Operating temp range of -40˚C to +85˚C with junction temperatures from -40˚C to +105˚C. All product documentation can be found on the Catalyst Semiconductor web site at www.catsemi.com. 8 V isit our website for samples, data sheets, and additional product information. H GEN FR ALO EE LE A D F R E ETM µP supervisory circuits CAT809 / CAT810 / CAT811 / CAT812 3-Pin/4-Pins Microprocessor Power Supply Supervisors Power Supply Supervisors Features ■ 6 µA power supply current ■ pin compatible with MAX809, 810, 811 and 812 SUPPLY VOLTAGE - push-pull RESET, active LOW (CAT809 and CAT811) - push-pull RESET, active HIGH (CAT810 and CAT812) ■ power supply transient immunity ■ manual reset (MR) (CAT811 / CAT812 only) ■ precision monitoring of 5.0 V, 3.3 V, 3.0 V and 2.5 V power supplies ■ reset valid down to VCC = 1.0 V ■ custom reset threshold voltage offered Package Information ■ 3-pin SOT23 (CAT809 / CAT810) ■ 3-pin SC70 ■ offered in two output configurations: MICROCONTROLLER RESET SIGNAL CAT809 SUPERVISOR CATALYST EEPROM MEMORY (CAT809 / CAT810) ■ 4-pin SOT143 (CAT811 / CAT812) Featured Products CAT1232LP 5 V µP Supply Voltage Monitor and µP Reset Circuit Features ■ power-up, power-down and brownout protection ■ watchdog timer 5V MANUAL RESET CAT1232LP PBRST TD VCC ST MICROCONTROLLER I/O TOL RESET GND RESET RESET - selectable watchdog period - 150ms, 600ms or 1.2 sec ■ selectable reset voltage tolerance - 5% or 10% ■ two reset outputs - active low, open-drain reset output - active high, push-pull reset output ■ debounced manual push-button reset ■ pin compatible with DS1232 and DS1232LP Package Information ■ 8-pin DIP ■ 8-pin & 16-pin SOIC ■ 8-pin MSOP H GEN FR ALO EE LE A D F R E ETM w w w. c at s e m i . c o m 9 µP supervisory circuits PRODUCT LIST µP SUPERVISORY CIRCUITs Part Number Threshold Letter J L M CAT809 R S T Z J L M CAT810 R S T Z J L M CAT811 R S T Z J L M CAT812 R S T Z Nominal Threshold (V) 4.0 4.63 4.38 2.63 2.93 3.08 2.32 4.0 4.63 4.38 2.63 2.93 3.08 2.32 4.0 4.63 4.38 2.63 2.93 3.08 2.32 4.0 4.63 4.38 2.63 2.93 3.08 2.32 DIP (P, L, GL) CAT1232LP CAT1832 4.62 or 4.37 2.88 or 2.55 8 8 MSOP (R, Z, GZ) 8 8 Reset Low High Manual Reset Watchdog Timer Packages (Pin Count)1 SC70 (SB, SD, GSD) 3 3 3 3 3 3 3 3 3 3 3 3 3 3 SOT23 (TP, TB, GTB) 3 3 3 3 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 4 4 4 SOIC (S, V, GV) 8, 16 8 SOT143 (TP, TB, GTB) Note: 1. Available in standard and “green” packages. All product documentation can be found on the Catalyst Semiconductor web site at www.catsemi.com. 10 V isit our website for samples, data sheets, and additional product information. H GEN FR ALO EE LE A D F R E ETM µP supervisory circuits SUPERVISORS WITH EEPROM MEMORY Packages (Pin Count)1 Part Number CAT1021 CAT1022 CAT1023 CAT1024 CAT1025 CAT1026 CAT1027 CAT1161 CAT1162 CAT1163 CAT1320 CAT1321 CAT1640 CAT1641 TDFN TDFN Typ Watchdog (RD4, ZD4, GD4) (RD2, ZD2, GD2) DIP MSOP SOIC TSSOP Reset Pulse Write Manual Timer (3x3mm) (3x4.9mm) Low High Input (P, L, GL) (R, Z, GZ) (J, W, GW) (U, Y, GY) Width Protect Reset Reset 200ms 200ms 200ms 200ms 200ms 200ms 200ms 200ms 200ms 200ms 200ms 200ms 200ms 200ms 2 2 2 2 2 2 2 Density (org) 2Kb (256x8) 2Kb (256x8) 2Kb (256x8) 2Kb (256x8) 2Kb (256x8) 2Kb (256x8) 2Kb (256x8) 16Kb(2048x8) 16Kb (2048x8) 16Kb (2048x8) 32Kb (4096x8) 32Kb (4096x8) 64Kb (8192x8) 64Kb (8192x8) SDA SDA WDI 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 WDI SDA WDI 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 Note: 1. Available in standard and “green” packages. 2. RESET pin can be used as an input for Push-Button MR. All product documentation can be found on the Catalyst Semiconductor web site at www.catsemi.com. H GEN FR ALO EE LE A D F R E ETM w w w. c at s e m i . c o m 11 i2c and smbus i/o port expanders CAT9554 / CAT9554A — 8-bit I2C and SMBus I/O Port Expander with Interrupt CAT9555 — 16-bit I2C and SMBus I/O Port Expander with Interrupt Features ■ 2.3V to 5.5V operation ■ -40°C to +85°C operation ■ 400kHz I2C bus compatible ■ 5V tolerant I/Os Package Information ■ drive LEDs by sinking 25mA current ■ individual I/O configuration ■ 16-pin SOIC (CAT9554), 24-pin SOIC (CAT9555) ■ active low interrupt output ■ internal power-on reset ■ 16-pin TSSOP (CAT9554), 24-pin TSSOP (CAT9555) ■ cascadable up to 8 devices-16 ■ noise filter on SDA/SCL inputs ■ 16-pad TQFN (4 x 4 mm) (CAT9554), 24-pin TQFN devices (CAT9555) (4x4mm) (CAT9555) ■ high drive capability ■ pin compatible with PCA9554/9554A and PCA9555 Featured Products A0 A1 A2 8-BIT SCL SDA INPUT FILTER I2C/SMBUS CONTROL WRITE pulse READ pulse INPUT/ OUTPUT PORTS I/O0 I/O1 I/O2 I/O3 I/O4 I/O5 I/O6 I/O7 POWER-ON RESET LP FILTER VCC VCC VSS NOTE: ALL I/Os ARE SET TO INPUTS AT RESET VDD MICROCONTROLLER V DD V DD SCL SDA INT GND I/O 0. 4 I/O 0. 5 ALARM SCL SDA INT I/O 0. 0 I/O 0. 1 I/O 0. 2 I/O 0. 3 Timer SUBSYSTEM 1 2k INT SUBSYSTEM 2 RESET A Applications ■ RAID systems ■ servers ■ test equipment ■ fan control ENABLE B SUBSYSTEM 3 CAT9535 I/O 0. 6 A2 A1 A0 I/O 0. 7 I/O 1. 0 I/O 1. 1 I/O 1. 2 I/O 1. 3 I/O 1. 4 I/O 1. 5 I/O 1. 6 7 V SS I/O 1. NUMERIC KEYPAD Controlled Switch V DD CAT9534 / CAT9535 8-bit / 16-bit I2C and SMBus Low Power I/O Port expander with Interrupt Features ■ low stand-by current ■ 0 to 400 kHz clock frequency ■ 2.3 V to 5.5 V operation ■ 5 V tolerant I/Os 12 ■ active low interrupt output ■ internal power-on reset ■ noise filter on SCL/SDA inputs Package Information ■ 16-pin SOIC & 16-pin TSSOP (CAT9534), 24-pin SOIC (CAT9535) ■ 16-pad TQFN (4 x 4 mm) (CAT9534), 24-pin TQFN (4x4mm) (CAT9535) ■ pin compatible with PCA9534 H GEN FR ALO EE V isit our website for samples, data sheets, and additional product information. LE A D F R E ETM i2c and smbus i/o port expanders CAT9532 — I2C Interfaced 16-bit LED Dimmer CAT9552 — I2C Interfaced 16-bit LED Blinker Features ■ 256 discrete brightness steps for easy LED dimming and color mixing ■ two programmable blinking rate between 0.625 sec and 1.6 sec for CAT9532; 0.02sec and 6.4 sec for CAT9552 ■ eliminates repeated commands to turn on/off LEDs, reducing I2C traffic ■ drives up to 16 LEDs; any bit that is not used to drive an LED can be used as a GPIO Applications ■ LED dimming ■ LCD backlighting ■ celluar phones VCC ■ 25mA sink current per bit (max 200mA per device) ■ each port can be individually turned on, off, or programmed to blink ■ during power-up or when a manual reset (hardware reset) is asserted, all outputs are set to off-mode ■ built in noise filter for SDA/SCL inputs ■ 0-400KHz clock frequency MICROCONTROLLER SDA SCL RSET SDA SCL RESET VDD LED0 LED1 LED2 LED3 LED4 LED5 LED6 CAT9532 A2 A1 A0 VSS LED7 LED8 LED9 LED10 LED11 LED12 LED13 LED14 LED15 Note: LED0 to LED12 are used as LED drivers LED13 to LED15 are used as regular GPIOs. General Purpose I/O PRODUCT LIST I2C INTERFACE I/O EXPANDERs Packages (Pin Count)1 Part Number CAT9554 CAT9554A CAT9534 CAT9555 CAT9535 CAT73112 CAT9532 CAT9552 Operating Voltage 2.3 V to 5.5 V 2.3 V to 5.5 V 2.3 V to 5.5 V 2.3 V to 5.5 V 2.3 V to 5.5 V 2.3 V to 5.5 V 2.3 V to 5.5 V 2.3 V to 5.5 V INT/ RESET INT out INT out INT out INT out INT out INT out RESET in RESET in Internal I/O Pullups TQFN SOIC TSSOP (HS4, HV4, GV4) LED Blink/ PWM (S,V, GV) (U, Y, GY) (4x4mm) NA NA NA NA NA NA BLINK0/PWMO, BLINK1/PWM1 BLINK0/PWMO, BLINK1/PWM1 163 16 3 I/Os 8 GPIO 8 GPIO 8 GPIO 16 GPIO 16 GPIO 16 GPIO 16 LED Dimmer/ GPIO 16 LED Blinker/ GPIO Cascadable 8 Slave ID Addresses 8 Slave ID Addresses 8 Slave ID Addresses 8 Slave ID Addresses 8 Slave ID Addresses 64 Slave ID Addresses 8 Slave ID Addresses 8 Slave ID Addresses 16 16 16 24 24 24 24 24 16 16 16 24 24 24 24 24 163 24 24 24 24 24 Notes: 1. Available in standard and “green” packages. 2. CAT7311 is pin compatible with the MAX7311. All other products are pin compatible with Philips (replace PCA with CAT to order). 3. 300 mil wide All product documentation can be found on the Catalyst Semiconductor web site at www.catsemi.com. H GEN FR ALO EE LE A D F R E ETM w w w. c at s e m i . c o m 13 digitally programmable potentiometers H CAT512O / CAT5121 / CAT5122 16-Tap MiniPot™ Digitally Programmable Potentiometers with Increment/Decrement Interface Features ■ 0.3µA ultra-low supply current ■ 2-wire up/down serial interface ■ resistance values: 10kΩ, 50kΩ and 100kΩ ■ single-supply operation: 2.7 V to 5.5 V ■ glitchless switching between resistor taps ■ power-on reset to midscale Package Information ■ 5- and 6-pin SC70 and SOT23 packages VDD GND CS UP/DOWN COUNTER U/D 16POSITION DECODER W L Featured Products CAT5259 256-Tap Quad Digitally Programmable Potentiometer Features ■ four linear taper digitally programmable potentiometers ■ end-to-end resistance 50kΩ or 100kΩ ■ low wiper resistance, typically 100Ω ■ non-volatile memory storage for up to four wiper settings for each potentiometer ■ automatic recall of saved wiper settings at power up ■ 2.5 V to 6.0 V volt operation ■ standby current less than 5µA Package Information ■ 24-pin SOIC & TSSOP packages RH0 RH1 RH2 R H3 SCL SDA 2-WIRE BUS INTERFACE WIPER CONTROL REGISTERS RW0 RW1 WP RW2 A0 A1 A2 A3 CONTROL LOGIC NONVOLATILE DATA REGISTERS RW3 RL0 RL1 RL2 R L3 14 V isit our website for samples, data sheets, and additional product information. H GEN FR ALO EE LE A D F R E ETM digitally programmable potentiometers PRODUCT LIST DIGITALLY PROGRAMMABLE POTENTIOMETERs (DPP™) Package (Pin Count)1 SOT23 (TP, TB, GTB) SC70 (SB, SD, GSD) TSSOP (U, Y, GY) 8 8 8 6 5 6 8 8 8 8 8 8 8 8 8 10 10 20 14 20 14 24 24 14 14 14 14 24 24 20 24 24 14 20 14 20 24 24 24 24 24 24 20 24 24 24 24 24 24 24 24 6 5 6 8 8 8 MSOP (R, Z, GZ) SOIC (S, J, GV) Part Number CAT5120 CAT5121 CAT5122 CAT5112 CAT5114 CAT5115 CAT5110 CAT5118 CAT5119 CAT5111 CAT5113 CAT5116 CAT5132 CAT5133 CAT521 CAT5221 CAT5411 CAT5419 CAT522 CAT523 CAT5261 CAT5269 CAT5241 CAT5401 CAT5409 CAT524 CAT525 CAT5251 CAT5259 Number of Pots 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 4 4 4 4 4 4 4 Number of Taps 16 16 16 32 32 32 32 32 32 100 100 100 128 128 256 64 64 64 256 256 256 256 64 64 64 256 256 256 256 Nonvolatile DIP (P, GL) Resistance (kΩ) 10, 50,100 10, 50,100 10, 50,100 10, 50,100 10, 50,100 10, 50,100 10, 50,100 10, 50,100 10, 50,100 10, 50,100 1, 10, 50, 100 32 (Log Taper) 10, 50, 100 10, 50, 100 6 2.5,10, 50, 100 2.5,10, 50, 100 2.5,10, 50, 100 24 6 50, 100 50, 100 2.5,10, 50, 100 2.5,10, 50, 100 2.5,10, 50, 100 6 24 50, 100 50, 100 Potentiometer Inputs Independent Common Common Independent Independent Independent Independent Common Common Independent Independent Independent Independent Independent Independent Independent Independent Independent Independent Common Independent Independent Independent Independent Independent Common Independent Independent Independent Buffered Wiper Interface INC/DEC INC/DEC INC/DEC INC/DEC INC/DEC INC/DEC INC/DEC INC/DEC INC/DEC INC/DEC INC/DEC INC/DEC 2-Wire INC/DEC Microwire 2-Wire SPI 2-Wire Microwire Microwire SPI 2-Wire 2-Wire SPI 2-Wire Microwire Microwire SPI 2-Wire Temp Range2 I I I C, I C, I I I I I C, I C, I I I I C, I I I I C, I C, I I I I I I C, I C, I I I 6 6 5 8 8 8 8 8 8 8 8 8 6 6 5 Notes: 1. Available in standard and “green” packages. 2. Temp Range - C is 0˚C to 70˚C ; I is -40˚C to +85˚C All product documentation can be found on the Catalyst Semiconductor web site at www.catsemi.com. H GEN FR ALO LE A D F R E ETM w w w. c at s e m i . c o m BGA (B) 15 Volatile EE digitally programmable potentiometers APPLICATION LITERATURE / EVALUATION AND DEMONSTRATION BOARDS DPP APPLICATION NOTES Document Number AN7 AN7J AN8 AN8J AN9 AN11 AN13 Title Programmable Analog Functions Programmable Analog Functions - Japanese Translation Everything You Wanted To Know About Digitally Programmable Potentiometers Everything You Wanted To Know About Digitally Programmable Potentiometers - Japanese Translation Minimizing The Temperature Dependence Of Digitally Programmable Potentiometers CAT51DB1 Digitally Programmable Potentiometer Demonstration Board With Incremental Up/Down Interface CAT51DB2 Digitally Programmable Potentiometer Demonstration Board With Incremental Up/Down Interface DPP APPLICATION BRIEF AB6 Digitally Programmable Potentiometer To Control LED Brightness DPP DESIGN NOTES DN1 DN2 DN3 DN4 DN5 DN6 DN7 Push Button Control Of Digitally Programmable Potentiometers With An Increment/Decrement Interface Electronic Versus Mechanical Potentiometers - A Comparison Operating Speeds Of Digitally Programmable Potentiometers Improving The Resolution Of Digitally Programmable Potentiometer Applications Making A Stop-Less Digitally Programmable Potentiometer Power-up And Power-down Characteristics For Digitally Programmable Potentiometers Package Thermal Characteristics All product documentation can be found on the Catalyst Semiconductor web site at www.catsemi.com. 16 V isit our website for samples, data sheets, and additional product information. H GEN FR ALO EE LE A D F R E ETM memory products Serial EEPROMs 2-Wire CAT24C00 I2C Bus, Partial Array Write Protect CAT24WC03 CAT24WC66 CAT24WC05 CAT24FC65 CAT24FC17 CAT24FC66 CAT24WC33 CAT24WC129 CAT24WC65 CAT24WC257 I2C Bus, Full Array Write Protect CAT24WC01 CAT24WC32 CAT24FC01 CAT24FC32 CAT24WC02 CAT24WC64 CAT24FC02 CAT24FC64 CAT24WC04 CAT24WC128 CAT24WC08 CAT24AC128 CAT24WC16 CAT24WC256 CAT24FC16 CAT24FC256 CAT24WC164 Application Specific EEPROM CAT34WC02 CAT34FC02 CAT34RC02 CAT24C21 CAT24C208 CAT24C01B SPI Bus, Mitsubishi Compatible CAT64LC10 CAT64LC20 CAT64LC40 SPI Bus with Block Write Protection CAT25C01 CAT25C08 CAT25010 CAT25C16 CAT25C02 CAT25C32 CAT25020 CAT25C64 CAT25C04 CAT25C128 CAT25040 CAT25C256 SPI Bus with Block Write & Page Write Protection CAT25C11 CAT25C17 CAT25C03 CAT25C33 CAT25C05 CAT25C65 CAT25C09 CATALYST Nonvolatile Memory Technology Core Memory Microwire™ Bus CAT93C46 CAT93C66 CAT93HC46 CAT93C76 CAT93C56 CAT93C86 CAT93C57 Parallel EEPROMs CAT28C16A CAT28C17A CAT28C64B CAT28C65B CAT28LV64 CAT28LV65 CAT28C256 CAT28C257 CAT28LV256 CAT28C512 CAT28C513 Flash Boot Block CAT28F001 Bulk Erase CAT28F512 CAT28F010 CAT28F020 NVRAM CAT22C10 CAT24C44 w w w. c at s e m i . c o m 17 H GEN FR ALO EE LE A D F R E ETM serial eeproms CAT34RC02 2-kb I2C Serial EEPROM, Serial Presence Detect Features ■ 1.7 to 5.5 volt operation ■ 16-byte page write buffer ■ 100 year data retention ■ 400 KHz I2C bus compatible* ■ 1,000,000 program/erase cycles ■ hardware write protection for entire memory ■ industrial and extended temperature ranges ■ low power CMOS technology ■ permanent and reversible software write protection for lower 128 bytes ■ schmitt trigger on SCL and SDA inputs VCC SCL A2, A1, A0 CAT34RC02 SDA WP Package Information ■ 8-pin DIP package ■ 8-pin SOIC package VSS ■ 8-pin TSSOP package ■ 8-pad TDFN (2x3 mm) package Featured Products Featured Products DDC VCC DSP VCC ARBITRATION LOGIC DSP SCL DSP SDA DISPLAY CONTROL LOGIC D E C O D E R S 1K X 8 MEMORY ARRAY D E C O D E R S DDC CONTROL LOGIC DDC SCL DDC SDA VSS CONFIGURATION REGISTER EDID SEL CAT24C208 8k (1k x 8) -Bit Dual Port Serial EEPROM for VESA Plug and Play Applications in LCD Projectors and Monitors Features ■ 3.0 to 5.5 volt operation ■ 16-byte page write buffer ■ 100 year data retention ■ 400 KHz I2C bus compatible* ■ 1,000,000 program/erase cycles 18 ■ hardware write protection for entire memory ■ industrial and extended temperature ranges ■ low power CMOS technology ■ complies with VESA E-DID, E-DDC, DI-EXT and M1 specifications Package Information ■ 8-pin DIP package ■ 8-pin MSOP package ■ 8-pin SOIC package ■ 8-pin TSSOP package H GEN FR ALO *Catalyst Semiconductor is licensed by Philips Corporation to carry the I2C Bus Protocol. EE V isit our website for samples, data sheets, and additional product information. LE A D F R E ETM serial eeproms PRODUCT LIST 2-Wire Serial EEPROM Family Package (Pin Count)1 SOIC SOT23 (TP, TB, GTB) JEDEC (J, W, GW) ICC (Active/ Standby) 2mA/1µA 3mA/1µA TSSOP (U, Y, GY) MSOP (R, Z, GZ) EIAJ (K, X, GX) DIP (P, L, GL) TDFN (3x4.9) (RD2, ZD2, GD2) 8 (3x3) (RD4, ZD4, GD4) 8 19 Part Number CAT24C00 CAT24C01B Temp Range I, E C, I, A Density (org) 128b (16x8) 1Kb (128x8) Min Voltage/ Max Clock Frequency 1.8V/100kHz, 2.5V/400kHz 1.8V/100kHz, 2.5V/100kHz, 4.5V/400kHz Voltage Range 1.8 - 5.5V 1.8 - 5.5V 8 8 8 8 8 8 5 8 8 I2C Bus Serial EEPROM Family with Full Array Write Protect CAT24WC01 CAT24FC01 CAT24WC02 CAT24FC02 CAT24WC04 CAT24WC08 CAT24WC16 CAT24FC16 CAT24WC164 CAT24WC32 CAT24FC32 CAT24WC64 CAT24FC64 CAT24WC128 CAT24AC128 CAT24WC256 CAT24FC256 C, I, A, E I, E C, I, A, E I, E C, I, A, E C, I, A, E C, I, A, E I, E C, I, A, E C, I, A, E I, E C, I, A, E I, E C, I, A, E C, I, E C, I, A, E I, A, E 1Kb (128x8) 1Kb (128x8) 2Kb (256x8) 2Kb (256x8) 4Kb (512x8) 8Kb (1024x8) 16Kb (2048x8) 16Kb (2048x8) 16Kb (2048x8) 32Kb (4096x8) 32Kb (4096x8) 64Kb(8192x8) 64Kb (8192x8) 128Kb (16Kx8) 128Kb (16Kx8) 256Kb (32Kx8) 256Kb (32Kx8) 3mA/1µA 3mA/1µA 3mA/1µA 3mA/1µA 3mA/1µA 3mA/1µA 3mA/1µA 3mA/1µA 3mA/1µA 3mA/1µA 3mA/1µA 3mA/1µA 3mA/1µA 3mA/1µA 3mA/1µA 3mA/1µA 3mA/1µA 1.8V/100kHz, 2.5V/100kHz, 4.5V/400kHz 2.5V/400kHz 1.8V/100kHz, 2.5V/100kHz, 4.5V/400kHz 2.5V/400kHz 1.8V/100kHz, 2.5V/100kHz, 4.5V/400kHz 1.8V/100kHz, 2.5V/100kHz, 4.5V/400kHz 1.8V/100kHz, 2.5V/100kHz, 4.5V/400kHz 2.5V/400kHz 1.8V/100kHz, 2.5V/100kHz, 4.5V/400kHz 1.8V/100kHz, 2.5V/100kHz, 4.5V/400kHz 2.5V/400kHz 1.8V/100kHz, 2.5V/100kHz, 4.5V/400kHz 2.5V/400kHz 1.8V/100kHz, 2.5V/400kHz 1.8V/100kHz, 2.5V/400kHz 1.8V/100kHz, 2.5V/400kHz 1.8V/400kHz, 2.5V/1MHz 1.8 - 6.0V 1.8 - 5.5V 1.8 - 5.5V 1.8 - 5.5V 1.8 - 5.5V 1.8 - 5.5V 1.8 - 5.5V 1.8 - 5.5V 1.8 - 5.5V 1.8 - 5.5V 2.5 - 5.5V 1.8 - 5.5V 2.5 - 5.5V 1.8 - 5.5V 1.8 - 5.5V 1.8 - 5.5V 1.8 - 5.5V 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 14 14 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 Note: 1. Available in standard and “green” packages. All product documentation can be found on the Catalyst Semiconductor web site at www.catsemi.com. H GEN FR ALO EE LE A D F R E ETM w w w. c at s e m i . c o m serial eeproms PRODUCT LIST I2C Bus Serial EEPROM Family with Partial Array Write Protect Package (Pin Count)1 SOIC JEDEC (J, W, GW) TSSOP (U, Y, GY) 2x3mm (SP2, VP2, GP2) MSOP (R, Z, GZ) EIAJ (K, X, GX) DIP (P, L, GL) TDFN 3x4.9mm (RD2, ZD2, GD2) 8 8 H GEN FR ALO Part Number CAT24WC03 CAT24WC05 CAT24FC17 CAT24WC33 CAT24WC65 CAT24WC66 CAT24FC65 CAT24FC66 CAT24WC129 CAT24WC257 Temp Range C, I, A, E C, I, A, E I, E C, I, A, E C, I, A, E C, I, A, E I, E I, E C, I, A, E C, I, A, E Density (org) 2Kb (256x8) 4Kb (512x8) 16Kb (2048x8) 32Kb (4096x8) 64Kb (8192x8) 64Kb (8192x8 64Kb (8192x8) 64Kb (8192x8) 128Kb (16Kx8) 256Kb (32Kx8) ICC (Active/ Standby) 3mA/1µA 3mA/1µA 3mA/1µA 3mA/1µA 3mA/1µA 3mA/1µA 3mA/1µA 3mA/1µA 3mA/1µA 3mA/1µA Min Voltage/ Max Clock Frequency 1.8V/100kHz, 2.5V/100kHz, 4.5V/400kHz 1.8V/100kHz, 2.5V/100kHz, 4.5V/400kHz 1.8V/100kHz, 2.5V/400kHz 1.8V/100kHz, 2.5V/100kHz, 4.5V/400kHz 1.8V/100kHz, 2.5V/100kHz, 4.5V/400kHz 1.8V/400kHz, 2.5V/400kHz 2.5V/400kHz 2.5V/400kHz 1.8V/100kHz, 2.5V/400kHz 1.8V/100kHz, 2.5V/400kHz Voltage Range 1.8 - 5.5V 1.8 - 5.5V 1.8 - 5.5V 1.8 - 5.5V 1.8 - 5.5V 1.8 - 5.5V 2.5 - 5.5V 2.5 - 5.5V 1.8 - 5.5V 1.8 - 5.5V 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 SPI Bus Serial EEPROM Family (Mitsubishi Compatible) Package (Pin Count)1 SOIC TSSOP (U, Y, GY) 8 8 8 JEDEC (S, V, GV) EIAJ (K, X, GX) ICC (Active/ Standby) 1mA/1µA 1mA/1µA 1mA/1µA TSSOP Rotated (UR, YR, GYR) 8 8 8 EE LE A D F R E ETM DIP (P, L, GL) Part Number CAT64LC10 CAT64LC20 CAT64LC40 Temp Range C, I, A C, I, A C, I, A Density (org) 1Kb (64x16) 2Kb (128x16) 4Kb (256x16) Min Voltage/ Max Clock Frequency 1MHz 1MHz 1MHz Voltage Range 2.5 - 6.0V 2.5 - 6.0V 2.5 - 6.0V 8 8 8 JEDEC (J, W, GW) 8 8 8 8 8 8 Note: 1. Available in standard and “green” packages. All product documentation can be found on the Catalyst Semiconductor web site at www.catsemi.com. 20 V isit our website for samples, data sheets, and additional product information. 3x3mm (RD4, ZD4, GD4) serial eeproms PRODUCT LIST Microwire™ Bus Serial EEPROM Family Package (Pin Count)1 SOIC JEDEC (J, W, GW) TSSOP (U, Y, GY) 8 8 8 8 8 8 8 8 8 8 8 8 (U, Y, GY) 8 8 8 8 8 8 8 8 14 14 14 20 14 20 8 8 14 20 MSOP (R, Z, GZ) JEDEC (S, V, GV) EIAJ (K, X, GX) DIP (P, L, GL) TDFN 3x3mm (RD4, ZD4, GD4) 8 8 8 8 8 8 8 TSSOP (U14, Y14, GY14) (U20, Y20, GY20) 21 MSOP (R, Z, GZ) 8 8 8 8 Part Number CAT93C46 CAT93HC46 CAT93C56 CAT93C57 CAT93C66 CAT93C76 CAT93C86 Temp Range C, I, A, E I, A, E C, I, A, E C, I, A, E C, I, A, E I, A, E C, I, A, E Density (org) 1Kb (64x16/128x8) 1Kb (64x16/128x8) 2Kb (128x16/256x8) 2Kb (128x16/256x8) 4Kb (256x16/512x8) 8Kb (512x16/256x8) 16Kb (1Kx16/2Kx8) ICC (Active/ Standby) 3mA/10µA 3mA/10µA 3mA/11µA 3mA/11µA 3mA/10µA 3mA/10µA 3mA/10µA Min Voltage/ Max Clock Frequency 1.8V/250kHz, 2.5V/500kHz, 4.5V/1MHz 1.8V/1MHz, 2.5V/3MHz 1.8V/250kHz, 2.5V/500kHz, 4.5V/1MHz 1.8V/250kHz, 2.5V/500kHz, 4.5V/1MHz 1.8V/250kHz, 2.5V/500kHz, 4.5V/1MHz 1.8V/1MHz, 2.5V/3MHz 1.8V/250kHz, 2.5V/500kHz, 4.5V/1MHz Voltage Range 1.8 - 6.0V 1.8 - 5.5V 1.8 - 6.0V 1.8 - 6.0V 1.8 - 6.0V 1.8 - 5.5V 1.8 - 6.0V 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 SPI Bus Serial EEPROM Family With Block Write Protection Package (Pin Count)1 SOIC JEDEC (S, V, GV) 8 8 8 8 8 8 8 8 8 8 8 EIAJ (K, X, GX) DIP (P, L, GL) 8 8 8 8 8 8 8 8 8 8 8 8 Part Number CAT25C01 CAT25010 CAT25C02 CAT25020 CAT25C04 CAT25040 CAT25C08 CAT25C16 CAT25C32 CAT25C64 CAT25C128 CAT25C256 Temp Range C, I, A, E C, I, A, E C, I, A, E C, I, A, E C, I, A, E C, I, A, E C, I, A, E C, I, A, E C, I, A, E C, I, A, E C, I, A, E C, I, A, E Density (org) 1K (128x8) 1K (128x8) 2K (256x8) 2K (256x8) 4K (512x8) 4K (512x8) 8K (1Kx8) 16K (2Kx8) 32K (4Kx8) 64Kb (8Kx8) 128Kb (16Kx8) 256Kb (32Kx8) ICC (Active/ Standby) 5mA/1µA 5mA/1µA 5mA/1µA 5mA/1µA 5mA/1µA 5mA/1µA 5mA/1µA 5mA/1µA 10mA/1µA 10mA/1µA 5mA/1µA 5mA/1µA Min Voltage/ Max Clock Frequency 1.8V/1MHz, 2.5V/5MHz, 4.5V/10MHz 1.8V/1MHz, 2.5V/5MHz, 4.5V/10MHz 1.8V/1MHz, 2.5V/5MHz, 4.5V/10MHz 1.8V/1MHz, 2.5V/5MHz, 4.5V/10MHz 1.8V/1MHz, 2.5V/5MHz, 4.5V/10MHz 1.8V/1MHz, 2.5V/5MHz, 4.5V/10MHz 1.8V/1MHz, 2.5V/5MHz, 4.5V/10MHz 1.8V/1MHz, 2.5V/5MHz, 4.5V/10MHz 1.8V/1MHz, 2.5V/3MHz, 4.5V/10MHz 1.8V/1MHz, 2.5V/3MHz, 4.5V/10MHz 1.8V/0.5MHz, 2.5V/3MHz, 4.5V/5MHz 1.8V/1MHz, 2.5V/2MHz, 4.5V/5MHz Voltage Range 1.8 - 6.0V, 2.5 - 6.0V 1.8 - 6.0V, 2.5 - 6.0V 1.8 - 6.0V, 2.5 - 6.0V 1.8 - 6.0V, 2.5 - 6.0V 1.8 - 6.0V, 2.5 - 6.0V 1.8 - 6.0V, 2.5 - 6.0V 1.8 - 6.0V, 2.5 - 6.0V 1.8 - 6.0V, 2.5 - 6.0V 1.8 - 6.0V, 2.5 - 6.0V 1.8 - 6.0V, 2.5 - 6.0V 1.8 - 6.0V, 2.5 - 6.0V 1.8 - 6.0V, 2.5 - 6.0V Note: 1. Available in standard and “green” packages. All product documentation can be found on the Catalyst Semiconductor web site at www.catsemi.com. H GEN FR ALO EE LE A D F R E ETM w w w. c at s e m i . c o m serial eeproms PRODUCT LIST SPI BUS SERIAL EEPROM FAMILY WITH BLOCK WRITE & PAGE WRITE PROTECTION Package (Pin Count)1 SOIC JEDEC (J, W, GW) MSOP (R, Z, GZ) JEDEC (S, V, GV) DIP (P, L, GL) TSSOP (U14, Y14, GY14) (U20, Y20, GY20) TDFN 2x3mm (SP2, VP2, GP2) 3x3mm (RD4, ZD4, GD4) Part Number CAT25C11 CAT25C03 CAT25C05 CAT25C09 CAT25C17 CAT25C33 CAT25C65 Temp Range C, I, A, E C, I, A, E C, I, A, E C, I, A, E C, I, A, E C, I, A, E C, I, A, E Density (org) 1K (128x8) 2K (256x8) 4K (512x8) 8K (1Kx8) 16K (2Kx8) 32K (4Kx8) 64Kb (8Kx8) ICC (Active/ Standby) 5mA/1µA 5mA/1µA 5mA/1µA 5mA/1µA 3mA/1µA 3mA/1µA 3mA/1µA Min Voltage/ Max Clock Frequency 1.8V/1MHz, 2.5V/5MHz, 4.5V/10MHz 1.8V/1MHz, 2.5V/5MHz, 4.5V/10MHz 1.8V/1MHz, 2.5V/5MHz, 4.5V/10MHz 1.8V/1MHz, 2.5V/5MHz, 4.5V/10MHz 1.8V/250kHz, 2.5V/500kHz, 4.5V/1MHz 1.8V/250kHz, 2.5V/500kHz, 4.5V/1MHz 1.8V/250kHz, 2.5V/500kHz, 4.5V/1MHz Voltage Range 1.8 - 6.0V, 2.5 - 6.0V 1.8 - 6.0V, 2.5 - 6.0V 1.8 - 6.0V, 2.5 - 6.0V 1.8 - 6.0V, 2.5 - 6.0V 1.8 - 6.0V, 2.5 - 6.0V 1.8 - 6.0V, 2.5 - 6.0V 1.8 - 6.0V, 2.5 - 6.0V 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 (U, Y, GY) 8 8 8 8 14 14 14 14 20 20 20 APPLICATION SPECIFIC EEPROM CAT34WC02 CAT34FC02 CAT34RC02 CAT24C21 CAT24C208 I I I I, E I, E 2Kb (256x8) 2Kb (256x8) 2Kb (256x8) 1K (128x8) 8K (1Kx8) 3mA/1µA 3mA/1µA 3mA/1µA 2mA/1µA 3mA/50µA 1.7V/100kHz, 4.5V/400kHz 1.7V/100kHz, 2.5V/400kHz 1.7V/100kHz, 2.5V/400kHz 2.5V / 400kHz 3.0V / 400kHz 1.7 - 5.5V 1.7 - 5.5V 1.7 - 5.5V 2.5 - 5.5V 3.0 - 5.5V 8 8 8 8 8 8 8 8 8 8 8 8 8 8 APPLICATION LITERATURE / EVALUATION AND DEMONSTRATION BOARDS Document Number AN1 AN2 AN3 AN5 AN6 AN6J AN10 AN10J Title Using Catalyst’s Serial EEPROMs in Shared Input/Output Configuration I2C Interface to 8051 Micorocontroller CAT64LC10: A User-Friendly Serial EEPROM Interfacing Multiple CAT24WCXX Serial EEPROMs on the I2C Bus CAT93CXX Serial EEPROM Design Guidelines for Power Up and Power Down Operation CAT93CXX Serial EEPROM Design Guidelines for Power Up and Power Down Operation - Japanese Translation Data Protection and Power Up/Down Sequence for CAT25CXX SPI Serial EEPROM Devices Data Protection and Power Up/Down Sequence for CAT25CXX SPI Serial EEPROM Devices - Japanese Translation Note: 1. Available in standard and “green” packages. All product documentation can be found on the Catalyst Semiconductor web site at www.catsemi.com. 22 V isit our website for samples, data sheets, and additional product information. H GEN FR ALO EE LE A D F R E ETM parallel eeproms / flash / nvram PRODUCT LIST PARALLEL EEPROMs Package (Pin Count)1 TSOP (T13, H13, G13) 28 28 28 28 32 TSOP Reverse Pinout (TR, HR, GHR) 32 32 32 23 SOIC JEDEC (J, W, GW) TSOP (T, H, GH) TSOP (T, H, GH) 32 32 32 32 PLCC (N, G, GG) 32 32 32 32 32 32 32 32 32 32 32 PLCC (N, G, GG) 32 32 32 32 EIAJ (K, X, GX) 24 24 28 28 28 28 DIP (P, L, GL) 24 24 28 28 28 28 28 28 28 32 Part Number CAT28C16A CAT28C17A CAT28C64B CAT28C65B CAT28LV64 CAT28LV65 CAT28C256 CAT28C257 CAT28LV256 CAT28C512 CAT28C513 Temp Range C,I,A C,I,A C,I,A C,I,A C, I C, I C, I, A C, I, A C, I C, I, A C, I, A Density (org) 16Kb (2Kx8) 16Kb (2Kx8) 64Kb (8Kx8) 64Kb (8Kx8) 64Kb (8Kx8) 64Kb (8Kx8) 256Kb (32Kx8) 256Kb (32Kx8) 256Kb (32Kx8) 512Kb (64Kx8) 512Kb (64Kx8) 512Kb (64Kx8) Access Time (ns) 90/120/200 200 90/120/150 90/120/150 150/200/250 150/200/250 120/150 120/150 250/300 120/150 120/150 ICC (Active/Standby) 25mA/100µA 25mA/100µA 25mA/100µA 25mA/100µA 8mA/100µA 8mA/100µA 25mA/150µA 25mA/150µA 15mA/150µA 50mA/500µA 50mA/500µA Voltage Range 4.5 - 5.5V 4.5 - 5.5V 4.5 - 5.5V 4.5 - 5.5V 3.0 - 3.6V 3.0 - 3.6V 4.5 - 5.5V 4.5 - 5.5V 3.0 - 3.6V 4.5 - 5.5V 4.5 - 5.5V 24 24 28 28 28 28 PRODUCT LIST FLASH MEMORIES - Boot Block Package (Pin Count)1 SOIC JEDEC (J, W, GW) JEDEC (S, V, GV) TSOP Part Number CAT28F001 Temp Range C,I,A Density (org) 1Mb (128Kx8) Access Time (ns) 90/120 ICC (Active/Standby) 30mA/100µA Voltage Range 5/12V PRODUCT LIST FLASH MEMORIES - Bulk Erase CAT28F512 CAT28F010 CAT28F020 C,I,A C,I,A C,I,A 512Kb (64Kx8) 1Mb (128Kx8) 2Mb (256Kx8) 90/120 90/120 90/120 30mA/100µA 30mA/100µA 30mA/100µA 5/12V 5/12V 5/12V 32 32 32 PRODUCT LIST NVRAM CAT22C10 CAT24C44 C,I,A C, I, A 256b (64x4) 256b (16x16) 200, 300 ns 1MHz 40mA/30µA 3mA/30µA 4.5 - 5.5V 4.5 - 5.5V 18 8 16 8 Note: 1. Available in standard and “green” packages. All product documentation can be found on the Catalyst Semiconductor web site at www.catsemi.com. H GEN FR ALO LE A D F R E ETM w w w. c at s e m i . c o m DIP (P, L, GL) 32 EE package / order information PACKAGE INFORMATION Package CERDIP MSOP PLCC PDIP PDIP 600 mils SC-70 SOIC 150 mils SOIC SOIC 300 mils SOIC 208 mils SOIC 300 mils, ext leads SOT-23 SOT-223 TSOT-23 SSOP TO-92 TSOP TSSOP SOT-143 SSOP TO-92 TSOP (8x13.4mm) TSOP (10x14mm) TSOP (8x20mm) TSSOP (4.4mm) TDFN-S-MSOP (3X4.9mm) TDFN (3X3mm) TDFN-S-SOIC (6X4.9mm) TDFN (2X2.5mm) TDFN (4X4mm) TDFN-S-TSSOP (3x6.4mm) TDFN (2X3mm) TQFN (4X4mm) P SB S, J S, J K K TP TA TS TP SS TN T13 T14 T U RD2 RD4 RD6 RD7 RD8 RD9 SP2 HS4 L SD V, W V, W X X TB TG TD TB SV TL H13 H14 H Y ZD2 ZD4 ZD6 ZD7 ZD8 ZD9 VP2 HV4 GL GSD GV, GW GV, GW GX GX GTB GTG GTD GTB GTL G13 G14 GH GY GD2 GD4 GD6 GD7 GD8 GD9 GP2 GV4 Description Ceramic DIP 600mils MSOP (3.0mm) PLCC PDIP 300 mils Package Codes “Green” 3 Std “Green “ Ni Pd Au C R N P Z G L GZ GG GL Nunber of Leads/Pads 4 5 6 8 14 16 18 20 22 24 28 32 40 44 All product documentation can be found on the Catalyst Semiconductor web site at www.catsemi.com. 24 V isit our website for samples, data sheets, and additional product information. H GEN FR ALO EE LE A D F R E ETM customer satisfaction & technical support CUSTOMER SATISFACTION The Catalyst customer satisfaction group is available to answer questions concerning orders and shipments. The toll-free number is 1.800.258.5991 (option #7). You may also send an email to customer.satisfaction@catsemi.com. TECHNICAL SUPPORT You may request technical assistance online. To contact our application staff, complete the technical support form available in the technical support section of our web site.The web site address is http://www.catsemi.com/techsupport/form.html. You may also use our toll-free technical support hotline at 1.800.258.5331 (option #6). Technical support is available during business hours, Pacific Time. catalyst semiconductor product policies LIMITED WARRANTY Devices sold by Catalyst Semiconductor, Inc. are covered by the limited warranty and other limited provisions appearing in its Terms of Sale. Catalyst Semiconductor makes no warranty, express, statutory, implied, or by description regarding the information set forth herein or regarding the freedom of the described devices from patent or other intellectual property infringement. Catalyst Semiconductor makes no warranty of merchantability or fitness for any purpose. Catalyst Semiconductor reserves the right to discontinue production and change specifications and prices at any time and without notice. Catalyst Semiconductor, Inc. assumes no responsibility for the use of any circuitry other than circuitry it embodies in a Catalyst Semiconductor product. LIFE-RELATED POLICY DISCLAIMER Catalyst Semiconductor does not authorize use of any of its products as critical components in life support devices or systems without the express written approval of the President of Catalyst Semiconductor, Inc., as used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. In situations where semiconductor component failure may endanger life, system designers using this product should design the system with appropriate error detection and correction, redundancy and backup features to prevent such an occurrence. TRADEMARKS Catalyst Semiconductor is licensed by Philips Corporation to carry the I2C Bus Protocol.Intelligent Programming,Quick Erase Programming and Quick-Pulse Programming are trademarks of Intel Corporation. Product names used in this publication are for identification purposes only and may be trademarks of their respective companies. Catalyst Semiconductor, Inc. reserves the right to make changes in the device or specifications described herein without notice. Information in this document is subject to change without notice. DPP™, DPPs™, Power Miser™, ZERO Power™, DACpot™, MiniPot™ and EasyPRO™ are trademarks of Catalyst Semiconductor, Inc. Microwire™ is a trademark of National Semiconductor. I2C™ is a trademark of Philips. SPI™ is a trademark of Motorola. © 2005 Catalyst Semiconductor, Inc. May 2005, Rev A Document Number 7047 CATALYST SEMICONDUCTOR REGIONAL SALES OFFICES UNITED STATES WEST Catalyst Semiconductor, Inc. 17 Chantilly Lane Ladera Ranch, CA 92694 Phone: 949-347-8800 FAX: 949-347-8500 CENTRAL/EAST Catalyst Semiconductor, Inc. 1141 East Main St. Suite 212 East Dundee, IL 60118 Phone: 847-836-6526 FAX: 847-836-7739 JAPAN Nippon Catalyst K.K. GS Plaza Sakuragicho Ekimae 10F-1001 1-46-1, Hanasakicho, Naka-ku Yokohama, 231-0063 JAPAN Phone: 81-45-260-8400 FAX: 81-45-260-8401 TAIWAN Catalyst Semiconductor, Inc. 11F-16 No. 6, Alley 180 Ming Chuan East Road, Sec. 6 Taipei, TAIWAN, R.O.C. Phone: 886-2-279-36432 Fax: 886-2-279-33433 KOREA Catalyst Semiconductor, Inc. Room 311, Hosoo Green Officetel 752-1 , Janghwang-dong, Ilsan-Ku Koyang-Si Kyungki-do KOREA Phone: 82-31-906-6102 FAX: 82-31-906-6103 SINGAPORE/MALAYSIA/THAILAND Catalyst Semiconductor, Inc. 11F-16 No. 6, Alley 180 Ming Chuan East Road, Sec. 6 Taipei, TAIWAN, R.O.C. Phone: 886-2-279-36432 Fax: 886-2-279-33433 SOUTH AMERICA Catalyst Semiconductor, Inc. 1141 East Main St. Suite 212 East Dundee, IL 60118 Phone: 847-836-6526 FAX: 847-836-7739 INTERNATIONAL CANADA Catalyst Semiconductor, Inc. 1141 East Main St. Suite 212 East Dundee, IL 60118 Phone: 847-836-6526 FAX: 847-836-7739 CHINA Catalyst Semiconductor, Inc. Room 809, Overseas Chinese Mansion No. 129, YanAn Road (West) Shanghai, 200040 P.R.C. Phone: 86-21-62491349 FAX: 86-21-62497409 Catalyst Semiconductor, Inc., Shenzhen Office Room 17F, Tower B, Fortune Plaza, 7060 Shennan Av., Shenzhen 518040, China Phone: 86-75-583021558 FAX: 86-75-583021733 EUROPE Catalyst Semiconductor, Inc. 33 Corbett Road Carterton, Oxford OX18 3LG UNITED KINGDOM Phone: 44-1993-840122 FAX: 44-1993-846851 HEADQUARTERS Catalyst Semiconductor, Inc. 1250 Borregas Avenue Sunnyvale, CA 94089 Phone: 408-542-1000 • Fax: 408-542-1200 www.catsemi.com