0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
CAT25C04S-1.8TE13

CAT25C04S-1.8TE13

  • 厂商:

    CATALYST

  • 封装:

  • 描述:

    CAT25C04S-1.8TE13 - 1K/2K/4K/8K/16K SPI Serial CMOS E2PROM - Catalyst Semiconductor

  • 详情介绍
  • 数据手册
  • 价格&库存
CAT25C04S-1.8TE13 数据手册
Advanced Information CAT25C01/02/04/08/16 1K/2K/4K/8K/16K SPI Serial CMOS E2PROM FEATURES s 10 MHz SPI Compatible s 1.8 to 6.0 Volt Operation s Hardware and Software Protection s Zero Standby Current s Low Power CMOS Technology s SPI Modes (0,0 & 1,1) s Commercial, Industrial and Automotive s 1,000,000 Program/Erase Cycles s 100 Year Data Retention s Self-Timed Write Cycle s 8-Pin DIP/SOIC, 8/14-Pin TSSOP and 8-Pin MSOP s 16/32-Byte Page Write Buffer s Block Write Protection – Protect 1/4, 1/2 or all of E2PROM Array Temperature Ranges DESCRIPTION The CAT25C01/02/04/08/16 is a 1K/2K/4K/8K/16K Bit SPI Serial CMOS E2PROM internally organized as 128x8/256x8/512x8/1024x8/2048x8 bits. Catalyst’s advanced CMOS Technology substantially reduces device power requirements. The CAT25C01/02/04 features a 16-byte page write buffer. The 25C08/16 features a 32-byte page write buffer.The device operates via the SPI bus serial interface and is enabled though a Chip Select (CS). In addition to the Chip Select, the clock input (SCK), data in (SI) and data out (SO) are required to access the device. The HOLD pin may be used to suspend any serial communication without resetting the serial sequence. The CAT25C01/02/04/08/16 is designed with software and hardware write protection features including Block Write protection. The device is available in 8-pin DIP, 8-pin SOIC, 8-pin MSOP and 8/ 14-pin TSSOP packages. PIN CONFIGURATION TSSOP Package (U14) CS SO NC NC NC WP VSS SOIC Package (S) CS SO WP VSS 1 2 3 4 8 7 6 5 VCC HOLD SCK SI DIP Package (P) CS SO WP VSS 1 2 3 4 8 7 6 5 VCC HOLD SCK SI CS SO WP VSS TSSOP Package (U) 1 2 3 4 8 7 6 5 VCC HOLD SCL SI 1 2 3 4 5 6 7 14 13 12 11 10 9 8 VCC HOLD NC NC NC SCK SI MSOP Package (R)* CS SO WP VSS BLOCK DIAGRAM SENSE AMPS SHIFT REGISTERS 1 2 3 4 8 7 6 5 VCC HOLD SCK SI *CAT 25C01/02 only WORD ADDRESS BUFFERS COLUMN DECODERS PIN FUNCTIONS Pin Name SO SCK WP VCC VSS CS SI HOLD NC Function Serial Data Output Serial Clock Write Protect +1.8V to +6.0V Power Supply Ground Chip Select Serial Data Input Suspends Serial Input No Connect SO SI CS WP HOLD SCK I/O CONTROL SPI CONTROL LOGIC BLOCK PROTECT LOGIC CONTROL LOGIC XDEC E2PROM ARRAY DATA IN STORAGE HIGH VOLTAGE/ TIMING CONTROL STATUS REGISTER 25C128 F02 © 1999 by Catalyst Semiconductor, Inc. Characteristics subject to change without notice 1 Doc. No. 25067-00 5/00 CAT25C01/02/04/08/16 Advanced Information ABSOLUTE MAXIMUM RATINGS* Temperature Under Bias ................. –55°C to +125°C Storage Temperature ....................... –65°C to +150°C Voltage on any Pin with Respect to VSS(1) .................. –2.0V to +VCC +2.0V VCC with Respect to VSS ................................ –2.0V to +7.0V Package Power Dissipation Capability (Ta = 25°C) ................................... 1.0W Lead Soldering Temperature (10 secs) ............ 300°C Output Short Circuit Current(2) ........................ 100 mA RELIABILITY CHARACTERISTICS Symbol NEND (3) *COMMENT Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions outside of those listed in the operational sections of this specification is not implied. Exposure to any absolute maximum rating for extended periods may affect device performance and reliability. Parameter Endurance Data Retention ESD Susceptibility Latch-Up Min. 1,000,000 100 2000 100 Max. Units Cycles/Byte Years Volts mA Reference Test Method MIL-STD-883, Test Method 1033 MIL-STD-883, Test Method 1008 MIL-STD-883, Test Method 3015 JEDEC Standard 17 TDR(3) VZAP(3) ILTH(3)(4) D.C. OPERATING CHARACTERISTICS VCC = +1.8V to +6.0V, unless otherwise specified. Limits Symbol ICC1 ICC2 ISB ILI ILO VIL(3) VIH(3) VOL1 VOH1 VOL2 VOH2 Parameter Power Supply Current (Operating Write) Power Supply Current (Operating Read) Power Supply Current (Standby) Input Leakage Current Output Leakage Current Input Low Voltage Input High Voltage Output Low Voltage Output High Voltage Output Low Voltage Output High Voltage VCC-0.2 VCC - 0.8 0.2 -1 VCC x 0.7 Min. Typ. Max. 5 3 0 2 3 VCC x 0.3 VCC + 0.5 0.4 Units mA mA µA µA µA V V V V V V 4.5V≤VCC
CAT25C04S-1.8TE13
1. 物料型号: - 型号为CAT25C01/02/04/08/16,分别代表1K/2K/4K/8K/16K位SPI串行CMOS E2PROM。

2. 器件简介: - CAT25C01/02/04/08/16是一款1K/2K/4K/8K/16K位SPI串行CMOS E2PROM,内部组织为128x8/256x8/512x8/1024x8/2048x8位。采用Catalyst的先进CMOS技术,显著降低设备功耗。CAT25C01/02/04具备16字节页面写缓冲区,而25C08/16具备32字节页面写缓冲区。该设备通过SPI总线串行接口工作,并由芯片选择(CS)启用。

3. 引脚分配: - SO:串行数据输出 - SCK:串行时钟 - WP:写保护 - Vcc:+1.8V至+6.0V电源供电 - Vss:地线 - CS:芯片选择 - SI:串行数据输入 - HOLD:暂停串行输入 - NC:无连接

4. 参数特性: - 兼容10MHz SPI - 1,000,000次编程/擦除周期 - 1.8至6.0伏特操作 - 100年数据保持 - 硬件和软件保护 - 自我定时写周期 - 零待机电流 - 8脚DIP/SOIC、8/14脚TSSOP和8脚MSOP封装 - 低功耗CMOS技术 - 16/32字节页面写缓冲区 - SPI模式(0,0和1,1) - 块写保护

5. 功能详解: - CAT25C01/02/04/08/16支持SPI总线数据传输协议。该设备包含一个8位指令寄存器。设备通过SI引脚接收数据,数据在SCK的上升沿被锁存。第一个字节包含定义要执行操作的六个操作码之一。

6. 应用信息: - 适用于商业、工业和汽车温度范围。

7. 封装信息: - 提供8脚DIP、8脚SOIC、8脚MSOP和8/14脚TSSOP封装。
CAT25C04S-1.8TE13 价格&库存

很抱歉,暂时无法提供与“CAT25C04S-1.8TE13”相匹配的价格&库存,您可以联系我们找货

免费人工找货