170183J630FB

Type 170 Axial Leaded Metallized Polypropylene High Current / Low ESR, Wrap and Fill Axial Leaded Capacitors The Type 170 series axial lead metallized polypropylene capacitors are available in bulk or on tape and reel for automatic insertion. The tape wrap and epoxy end fill construction meets UL510 (outer wrap) and UL94V0 (epoxy). Type 170 is non-inductive with low ESR and high current capability for switch-mode power supply applications Highlights E Low ESR High current Available on tape and reel or bulk Epoxy end fill meets UL94V-0 Non inductively wound Flame retardant outer wrap meets UL510 LE T • • • • • • Specifications Capacitance Range: Voltage Range: Capacitance Tolerance: Operating Temperature Range: voltage at 105 ºC) 1.6 x rated voltage for 2 s @ +25 ºC ±5 ºC tgδ x 10–4 at +25 ºC ±5 ºC O Dielectric Withstand Voltage: Dissipation Factor (DF): 0.001 µF to 4.7 µF 160 to 630 Vdc (90 to 250 Vac, 60 Hz) ±5%, ±10%, ±20% –55 ºC to +105 ºC (derate linearly to 50% rated O BS Insulation Resistance: Self Inductance: Life Test: Damp Heat Test: Soldering: Long Term Storage Stability: Maximum Pulse Rise Time dv/dt and Pulse Characteristic (Wo): Complies with the EU Directive 2002/95/EC requirement restricting the use of Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent chromium (Cr(VI)), PolyBrominated Biphenyls (PBB) and PolyBrominated Diphenyl Ethers (PBDE). kHz C ≤0.1 µF 0.1 µF 1 µF 1 ≤6 ≤6 ≤6 10 ≤10 ≤20 — 100 ≤30 — — 100,000 MΩ x µF, 200,000 MΩ Min. 1 nH max. per 1 mm lead and body length 1000 hrs @ 85 ºC 1.25 x Vn 95% RH @ +40 ºC for 21 days 260 ºC ±5 ºC for 10 s ±1 s ΔC/C ≤ ±0.5% after 2 years L Max Vn 11 16.5 20.5 28 33 160 5 5 3 2 1 250 11 10 7 4 2.5 400 – 13.5 10 6.5 4 630 – 20 15 10 6 If the working voltage (V) is less than the nominal voltage (Vn), the capacitor can work at higher dv/dt . In this case, the maximum value allowed is obtained by multiplying the above value (See table dv/dt) with the ratio Vn/V Outline Drawing Ød ±.003 ±0.076 mm) 1.58 ±0.2 (40 ±5 mm) L Max 1.58 ±0.2 (40 ±5 mm) D Max Lead Material: tinned copper wire CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Type 170 Axial Leaded Metallized Polypropylene Tape and Reel Specifications Distance Between Lead Spacing (Body Length) Reel Flanges Diameter Class Inches mm Inches mm Inches mm ≤.433 ≤11 2.06 52.4 3.0 75 1 2.50 63.6 3.4 86 2 2.87 73.0 3.7 95 3 .551 - .808 14 - 20.5 ≥1.03 ≥26 Add class number (1, 2 or 3) to Catalog Part Number to indicate tape and reel Λ Inches mm Quantity per Reel 0.197 5 3,000 .236 thru .256 6.0 thru 6.5 1,200 0.276 7 1,100 .315 thru .346 8 thru 8.5 800 .354 thru .413 9 thru 10.5 500 .433 thru .512 11 thru 13 300 .551 thru .571 14 thru 14.5 200 >0.571 14.5 Not available Ratings Inches (mm) ESR IRMS (Amps) Inches (mm) (mΩ) (µF) Part Number to D Max Ød L Max 0.022 170223*160AA^ 0.197 (5.0) 0.433 (11.0) 0.02 (0.5) 0.022 170223*160BB^ 0.236 (6.0) 0.65 (16.5) 0.02 (0.5) 0.027 170273*160AA^ 0.197 (5.0) 0.433 (11.0) 0.02 (0.5) 0.027 170273*160BB^ 0.236 (6.0) 0.65 (16.5) 0.02 (0.5) 0.033 170333*160AA^ 0.197 (5.0) 0.433 (11.0) 0.02 (0.5) 0.033 170333*160BB^ 0.236 (6.0) 0.65 (16.5) 0.02 (0.5) 0.039 170393*160AA^ 0.197 (5.0) 0.433 (11.0) 0.02 (0.5) 0.039 170393*160BB^ 0.236 (6.0) 0.65 (16.5) 0.02 (0.5) 0.047 170473*160AA^ 0.197 (5.0) 0.433 (11.0) 0.02 (0.5) 0.047 170473*160BB^ 0.236 (6.0) 0.65 (16.5) 0.02 (0.5) 0.056 170563*160BB^ 0.236 (6.0) 0.65 (16.5) 0.068 170683*160BB^ 0.236 (6.0) 0.082 170823*160BB^ 0.1 Cap Catalog to 100 kHz 25 ºC 45 ºC 85 ºC 160 Vdc / 90 Vac 60 Hz IRMS (Amps) 20 kHz LE T Catalog ESR (mΩ) 20 kHz Cap E L Max (µF) Part Number D Max L Max Ød 100 kHz 25 ºC 45 ºC 85 ºC 250 Vdc / 200 Vac 60 Hz 170103*250AA^ 0.197 (5.0) 0.433 (11.0) 0.02 (0.5) 0.01 170103*250BB^ 0.236 (6.0) 0.65 (16.5) 0.02 (0.5) 0.012 170123*250AA^ 0.197 (5.0) 0.433 (11.0) 0.02 (0.5) 0.012 170123*250BB^ 0.236 (6.0) 0.65 (16.5) 0.02 (0.5) 0.015 170153*250AA^ 0.197 (5.0) 0.433 (11.0) 0.02 (0.5) 0.015 170153*250BB^ 0.236 (6.0) 0.65 (16.5) 0.02 (0.5) 0.018 170183*250BB^ 0.236 (6.0) 0.65 (16.5) 0.024 (0.6) 0.022 170223*250BB^ 0.236 (6.0) 0.65 (16.5) 0.024 (0.6) 0.027 170273*250BB^ 0.236 (6.0) 0.65 (16.5) 0.024 (0.6) capacitance values are 0.033 170333*250BB^ 0.236 (6.0) 0.65 (16.5) 0.024 (0.6) 0.024 (0.6) not customarily used in 0.039 170393*250CB^ 0.256 (6.5) 0.65 (16.5) 0.024 (0.6) 0.65 (16.5) 0.024 (0.6) switched-mode power capacitance values are 0.047 170473*250CB^ 0.256 (6.5) 0.65 (16.5) 0.024 (0.6) not customarily used in 0.236 (6.0) 0.65 (16.5) 0.024 (0.6) 0.056 170563*250EB^ 0.315 (8.0) 0.65 (16.5) 0.031 (0.8) switched-mode power 170104*160BB^ 0.236 (6.0) 0.65 (16.5) 0.024 (0.6) 0.068 170683*250EB^ 0.315 (8.0) 0.65 (16.5) 0.031 (0.8) 0.12 170124*160DB^ 0.276 (7.0) 0.65 (16.5) 0.024 (0.6) 0.082 170823*250FB^ 0.335 (8.5) 0.65 (16.5) 0.031 (0.8) 0.15 170154*160DB^ 0.276 (7.0) 0.65 (16.5) 0.024 (0.6) 0.1 170104*250FB^ 0.335 (8.5) 0.65 (16.5) 0.031 (0.8) 0.18 170184*160EB^ 0.315 (8.0) 0.65 (16.5) 0.031 (0.8) 0.12 170124*250FC^ 0.335 (8.5) 0.807 (20.5) 0.031 (0.8) 0.22 170224*160EB^ 0.315 (8.0) 0.65 (16.5) 0.031 (0.8) 0.15 170154*250FC^ 0.335 (8.5) 0.807 (20.5) 0.031 (0.8) 0.27 170274*160EC^ 0.315 (8.0) 0.807 (20.5) 0.031 (0.8) 0.18 170184*250HC^ 0.374 (9.5) 0.807 (20.5) 0.031 (0.8) 0.22 170224*250HC^ 0.374 (9.5) 0.807 (20.5) 0.031 (0.8) O 0.01 O BS Not applicable. These 0.33 170334*160EC^ 0.315 (8.0) 0.807 (20.5) 0.031 (0.8) 0.39 170394*160HC^ 0.374 (9.5) 0.807 (20.5) 0.031 (0.8) 0.47 170474*160HC^ 0.374 (9.5) 0.807 (20.5) 0.031 (0.8) 0.56 170564*160GE^ 0.354 (9.0) 1.102 (28) 0.68 170684*160GE^ 0.354 (9.0) 1.102 (28) 0.82 170824*160JE^ 0.413 (10.5) 1.102 (28) supplies. Not applicable. These supplies. 0.27 170274*250GE^ 0.354 (9.0) 1.102 (28) 0.031 (0.8) 37 8.7 3.1 1.4 0.33 170334*250GE^ 0.354 (9.0) 1.102 (28) 0.031 (0.8) 0.031 (0.8) 35 3.9 3.3 1.5 0.39 170394*250JE^ 0.413 (10.5) 1.102 (28) 0.031 (0.8) 0.031 (0.8) 33 4.1 3.5 1.6 0.47 170474*250JE^ 0.413 (10.5) 1.102 (28) 0.031 (0.8) 35 3.8 3.6 1.7 0.031 (0.8) 31 4.3 3.6 1.7 0.56 170564*250ME^ 0.472 (12.0) 1.102 (28) 0.031 (0.8) 33 3.9 3.7 1.8 1 170105*160JE^ 0.413 (10.5) 1.102 (28) 0.031 (0.8) 26 5.5 4.7 2.6 0.68 170684*250ME^ 0.472 (12.0) 1.102 (28) 0.031 (0.8) 32 4 3.8 1.9 1.5 170155*160ME^ 0.472 (12.0) 1.102 (28) 0.031 (0.8) 20 6.1 5.1 3.1 0.82 170824*250NF^ 0.512 (13.0) 1.299 (33) 0.031 (0.8) 31 4.2 4 2 3.2 2.2 170225*160PF^ 0.531 (13.5) 1.299 (33) 0.031 (0.8) 18 6.8 5.7 3.3 1 170105*250NF^ 0.512 (13.0) 1.299 (33) 0.031 (0.8) 28 4.4 4.4 3.3 170335*160TF^ 0.610 (15.5) 1.299 (33) 0.039 (1.0) 16 7.4 6.4 3.6 1.5 170155*250TF^ 0.610 (15.5) 1.299 (33) 0.031 (0.8) 26 5.1 4.9 3.5 4.7 170475*160XF^ 0.709 (18.0) 1.299 (33) 0.039 (1.0) 15 8.1 6.8 3.9 2.2 170225*250XF^ 0.709 (18.0) 1.299 (33) 0.039 (1.0) 20 8.4 7 4.1 3.3 170335*250ZF^ 0.827 (21.0) 1.299 (33) 0.039 (1.0) 18 9 7.8 4.5 * Indicates capacitance tolerance J = ±5%, K = ±10%, M = ±20% ^If ordering tape and reel, insert 1,2, or 3. See tape & reel specifications to determine which class applies. Replacement Part No. with "BB" case size. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Type 170 Axial Leaded Metallized Polypropylene Cap Catolog (µF) Part Number ESR (mΩ) Inches (mm) D Max L Max 20 kHz to Ød IRMS (Amps) 100 kHz 25 ºC 45 ºC 85 ºC Cap (µF) 400 Vdc / 220 Vac 60 Hz ESR (mΩ) Inches (mm) Catolog Part Number D Max L Max 20 kHz to Ød IRMS (Amps) 100 kHz 25 ºC 45 ºC 85 ºC 630 Vdc / 250 Vac 60 Hz 0.001 170102*630BB^ 0.236 (6.0) 0.65 (16.5) 0.024 (0.6) 0.018 170183*400CB^ 0.256 (6.5) 0.65 (16.5) 0.024 (0.6) 0.0012 170122*630BB^ 0.236 (6.0) 0.65 (16.5) 0.024 (0.6) 0.022 170223*400CB^ 0.256 (6.5) 0.65 (16.5) 0.024 (0.6) 0.0015 170152*630BB^ 0.236 (6.0) 0.65 (16.5) 0.024 (0.6) 0.027 170273*400DB^ 0.276 (7.0) 0.65 (16.5) 0.024 (0.6) 0.0018 170182*630BB^ 0.236 (6.0) 0.65 (16.5) 0.024 (0.6) 0.033 170333*400DB^ 0.276 (7.0) 0.65 (16.5) 0.024 (0.6) 0.0022 170222*630BB^ 0.236 (6.0) 0.65 (16.5) 0.024 (0.6) 0.039 170393*400EB^ 0.315 (8.0) 0.65 (16.5) 0.031 (0.8) 0.0027 170272*630BB^ 0.236 (6.0) 0.65 (16.5) 0.024 (0.6) 0.047 170473*400EB^ 0.315 (8.0) 0.65 (16.5) 0.031 (0.8) 0.0033 170332*630BB^ 0.236 (6.0) 0.65 (16.5) 0.024 (0.6) 0.056 170563*400EC^ 0.315 (8.0) 0.807 (20.5) 0.031 (0.8) 0.0039 170392*630BB^ 0.236 (6.0) 0.65 (16.5) 0.024 (0.6) LE T Not applicable. 0.068 170683*400EC^ 0.315 (8.0) 0.807 (20.5) 0.031 (0.8) These capacitance values 0.082 170823*400GC^ 0.354 (9.0) 0.807 (20.5) 0.031 (0.8) are not customarily used in switched-mode power supplies 0.10 170104*400GC^ 0.354 (9.0) 0.807 (20.5) 0.031 (0.8) E 0.015 170153*400BB^ 0.236 (6.0) 0.65 (16.5) 0.024 (0.6) 0.12 170124*400FE^ 0.335 (8.5) 1.102 (28) 0.031 (0.8) 0.0047 170472*630BB^ 0.236 (6.0) 0.65 (16.5) 0.024 (0.6) 0.0056 170562*630BB^ 0.236 (6.0) 0.65 (16.5) 0.024 (0.6) 0.0068 170682*630CB^ 0.256 (6.5) 0.65 (16.5) 0.024 (0.6) 0.0082 170822*630CB^ 0.256 (6.5) 0.65 (16.5) 0.024 (0.6) 0.15 170154*400FE^ 0.335 (8.5) 1.102 (28) 0.031 (0.8) 0.010 170103*630CB^ 0.256 (6.5) 0.65 (16.5) 0.024 (0.6) 0.18 170184*400IE^ 0.394 (10) 1.102 (28) 0.031 (0.8) 0.012 170123*630EB^ 0.315 (8.0) 0.65 (16.5) 0.031 (0.8) 0.22 170224*400IE^ 0.394 (10) 1.102 (28) 0.031 (0.8) 0.015 170153*630EB^ 0.315 (8.0) 0.65 (16.5) 0.031 (0.8) Not Applicable. 0.018 170183*630FB^ 0.335 (8.5) 0.65 (16.5) 0.031 (0.8) These capacitance values 0.022 170223*630FB^ 0.335 (8.5) 0.65 (16.5) 0.031 (0.8) are not customarily used in switched-mode power supplies 0.027 170273*630FC^ 0.315 (8.0) 0.807 (20.5) 0.031 (0.8) O 0.27 170274*400LE^ 0.453 (11.5) 1.102 (28) 0.031 (0.8) 0.33 170334*400LE^ 0.453 (11.5) 1.102 (28) 0.031 (0.8) 0.39 170394*400NE^ 0.512 (13.0) 1.102 (28) 0.031 (0.8) 32 5.7 5 BS 0.47 170474*400NE^ 0.512 (13.0) 1.102 (28) 0.031 (0.8) 2.2 0.56 170564*400QF^ 0.571 (14.5) 1.299 (33) 0.031 (0.8) 31 5.7 5.3 2.3 0.68 170684*400QF^ 0.571 (14.5) 1.299 (33) 0.031 (0.8) 30 5.7 5.5 2.4 0.82 170824*400VF^ 0.669 (17) 1.299 (33) 0.039 (1.0) 28 5.7 5.6 2.6 1.0 170105*400VF^ 0.669 (17) 1.299 (33) 0.039 (1.0) 27 5.7 5.7 4.3 1.5 170155*400YF^ 0.807 (20.5) 1.299 (33) 0.039 (1.0) 25 7 O * Indicates Tolerance J = ±5%, K = ±10%, M = ±20% Λ If ordering Tape & Reel, see specification to determine which class (1, 2, or 3) applies 6.7 4.7 0.033 170333*630FC^ 0.315 (8.0) 0.807 (20.5) 0.031 (0.8) 0.039 170393*630HC^ 0.374 (9.5) 0.807 (20.5) 0.031 (0.8) 0.047 170473*630HC^ 0.374 (9.5) 0.807 (20.5) 0.031 (0.8) 0.056 170563*630GE^ 0.354 (9.0) 1.102 (28) 0.031 (0.8) 0.068 170683*630GE^ 0.354 (9.0) 1.102 (28) 0.031 (0.8) 0.082 170823*630IE^ 0.394 (10) 1.102 (28) 0.031 (0.8) 0.100 170104*630IE^ 0.394 (10) 1.102 (28) 0.031 (0.8) 0.120 170124*630ME^ 0.472 (12.0) 1.102 (28) 0.031 (0.8) 0.150 170154*630ME^ 0.472 (12.0) 1.102 (28) 0.031 (0.8) 0.180 170184*630NF^ 0.512 (13.0) 1.299 (33) 0.031 (0.8) 0.220 170224*630NF^ 0.512 (13.0) 1.299 (33) 0.031 (0.8) 0.270 170274*630TF^ 0.610 (15.5) 1.299 (33) 0.031 (0.8) 0.330 170334*630TF^ 0.610 (15.5) 1.299 (33) 0.031 (0.8) 0.390 170394*630XF^ 0.709 (18.0) 1.299 (33) 0.039 (1.0) 0.470 170474*630XF^ 0.709 (18.0) 1.299 (33) 0.039 (1.0) 28 6.8 5.8 2.6 0.560 170564*630ZF^ 0.827 (21.0) 1.299 (33) 0.039 (1.0) 26 7.4 6.3 2.8 0.680 170684*630ZF^ 0.827 (21.0) 1.299 (33) 0.039 (1.0) 25 7.8 6.8 2.9 CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com