779P1235400JF3

Type 778P/779P, Orange Drop®, Polypropylene Film/Foil Capacitors 400 VAC Type 778P/779P Orange Drop® 400 Volts A-C Polypropylene Film/Foil Capacitors Features Insulation Resistance: • Specifically designed for A-C voltage applications where corona free operation is required for high reliability. • Extremely low dissipation factor and ESR. 400,000 M⍀ minimum at +25°C 20,000 M⍀ minimum at +85°C 2,000 M⍀ minimum at +105°C Temperature Coefficient (typical, over temperature range of -55°C to +85°C): -140 ppm/°C, Type 778P -180 ppm/°C, Type 779P • Ideal for high frequency, high pulse current applications; dV/dt rating up to 77,400 volts/µsec. Pulse Rise Time, dV/dt: See standard ratings table. • Excellent stability, virtually linear temperature coefficient. Dissipation Factor & ESR: • Compact size with various lead spacings. See standard ratings table. Corona Start Voltage (typical): Specifications 500 Volts RMS Encapsulation: Capacitance Range: Conformal coating of flame retardant orange epoxy (meets UL94V-0 specs.) 470 pF to .033 µF Capacitance Tolerance: Dielectric: ±1% to ±10% Polypropylene film; utilizing a floating common of metallized polypropylene, which provides self-healing characteristics. Voltage Ratings: 400 Volts A-C/630 Volts D-C Construction: Operating Temperature Range: -55°C to +85°C (+105°C with proper voltage derating) Non-inductively wound with extended foil, internal series-section design. Applications: Lead Wire: Tinned copper-clad steel, .032" (.8) diameter, #20 AWG Electronic Lighting Ballasts, Switching Power Supplies, Resonant Converters. Regulatory Information Dimensions in inches, metric (mm) in parenthesis. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 Type 778P/779P, Orange Drop®, Polypropylene Film/Foil Capacitors High Performance Ordering/Part Number Information 715P 222 6 5 J D 3 (XXXX) A suffix may be added by the factory to denote special construction. Lead Length 1 = 0.187 (4.7) ±0.030 (0.8) 2 = 0.250 (6.4) ±0.030 (0.8) 3 = 1.250 (32.0) Minimum (Other lead lengths available) Terminal A = Straight Lead (1.25 Min. lead length) B,F = Hairpin Crimp G,H = Hockey Stick Crimp Case Code See Standard Sizes/Ratings Table D-C Voltage Rating Expressed in Volts Capacitance Tolerance 9 = ±10%; 5 = ±5%; 3 = ±3%; 2 = ±2%; 1 = ±1% Capacitance Expressed in Picofarads. The first two digits are the significant figures, the third is the number of zeros following. (i.e. 222 = 2200 pF = .0022 µF) CDE Type Number Identifies the basic capacitor design. 778P Round profile, 779P Pressed profile Standard Marking Format Sample Marking Description on unit Tolerance codes per EIA standards CDE CDE Electronics identification F ±1% CDE778P800VAC 778P Type number G ±2% 222J 9810 4040VAC AC Voltage rating, Volts H ±3% 222J Capacitance and tolerance code J ±5% 9810 Weekly date code (i.e. 10th wk of 1998) K ±10% CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 Type 778P/779P, Orange Drop®, Polypropylene Film/Foil Capacitors 400 VAC Standard Lead Styles Type 778P TERMINAL A Type 779P TERMINAL G,H TERMINAL B,F Standard Lead Spacings S Term. A Term. B Term. F 0.590 (15.0) 0.590 (15.0) 0.394 (10.0) Term. G 0.295 (7.5) Term. H 0.197 (5.0) Note: For additional capacitance values, further detailed technical data, application information, or any questions, please contact us! Dimensions in inches, metric (mm) in parenthesis. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 Type 778P/779P, Orange Drop®, Polypropylene Film/Foil Capacitors 400 VAC Type 778P, 400 VAC/630 VDC Standard Sizes/Ratings Value (µF) Part Number* .00047 .00056 .00068 .00075 .00082 .001 .0012 .0015 .0018 .0022 .0025 .0027 .0033 .0039 .0047 .0051 .0056 .0062 .0068 .0075 .0082 .01 .012 .015 .018 .022 778P4715400J 778P5615400J 778P6815400J 778P7515400J 778P8215400J 778P1025400J 778P1225400J 778P1525400J 778P1825400J 778P2225400J 778P2525400J 778P2725400J 778P3325400J 778P3925400J 778P4725400J 778P5125400J 778P5625400J 778P6225400J 778P6825400J 778P7525400J 778P8225400J 778P1035400J 778P1235400J 778P1535400J 778P1835400J 778P2235400J L MAX .75 .75 .75 .75 .75 .75 .75 .75 .75 .75 .75 .75 .75 .75 .75 .75 .75 .75 .75 .75 .75 .75 .75 .75 .75 .75 (19.1) (19.1) (19.1) (19.1) (19.1) (19.1) (19.1) (19.1) (19.1) (19.1) (19.1) (19.1) (19.1) (19.1) (19.1) (19.1) (19.1) (19.1) (19.1) (19.1) (19.1) (19.1) (19.1) (19.1) (19.1) (19.1) DIA MAX H MAX .28 .29 .30 .30 .27 .28 .29 .25 .26 .27 .28 .28 .29 .30 (7.1) (74) (7.6) (7.6) (6.9) (7.1) (74) (6.4) (6.6) (6.9) (7.1) (7.1) (74) (7.6) .32 (8.1) .32 (8.1) .33 (8.4) .34 .35 .36 .37 .39 .41 .45 .47 .51 (8.6) (8.9) (9.1) (9.4) (9.9) (10.4) (11.4) (11.9) (13.0) .31 (7.9) .32 (8.1) .33 (8.4) .34 (8.6) .30 .31 .32 .29 .30 .30 .31 .32 .33 .34 (7.6) (7.9) (8.1) (74) (7.6) (7.6) (7.9) (8.1) (8.4) (8.6) .35 .36 .37 .38 .39 .40 .41 .43 .45 .49 .52 .55 (8.9) (9.1) (9.4) (9.7) (9.9) (10.2) (10.4) (10.9) (11.4) (12.4) (13.2) (14.0) Seated Max dV/dt Peak I Max % D.F. Max ESR (m⍀) Height (Volts/µsec) Amps 20KHz 100KHz 20KHz 100KHz 77400 70900 64400 61300 58600 53100 48500 43300 39600 35800 33600 32300 29200 26900 24500 23500 22400 21300 20400 19400 18500 16800 15300 13700 12500 11300 54.6 .56 .57 .58 .59 .55 .56 .57 .54 .55 .55 .56 .57 .58 .59 .60 .61 .62 .63 .64 .65 .66 .68 .70 .74 .77 .80 (14.2) (14.5) (14.7) (15.0) (14.0) (14.2) (14.5) (13.7) (14.0) (14.0) (14.2) (14.5) (14.7) (15.0) (15.2) (15.5) (15.7) (16.0) (16.3) (16.5) (16.8) (17.3) (17.8) (18.8) (19.6) (20.3) .029 .029 .029 .029 .030 .030 .030 .031 .031 .031 .031 .031 .031 .031 .031 .031 .031 .031 .031 .031 .031 .031 .031 .031 .032 .032 59.6 65.7 69.0 72.1 79.6 87.2 97.5 106.8 118.1 125.9 130.8 144.6 157.3 172.6 179.8 188.4 198.3 207.6 218.1 228.0 251.8 275.8 308.4 337.8 373.5 .039 .040 .040 .040 .042 .042 .042 .047 .047 .047 .047 .048 .048 .048 .048 .048 .048 .048 .049 .049 .049 .049 .050 .051 .051 .052 4910 4121 3394 3077 2911 2387 1989 1645 1371 1121 987 914 748 633 525 484 441 398 363 329 301 247 206 164 141 116 1321 1137 936 849 815 668 557 499 416 340 299 283 231 196 163 150 136 123 115 104 95 78 66 54 45 38 Type 779P, 400 VAC/630 VDC Standard Sizes/Ratings1 Value (µF) Part Number* .00068 .00075 .00082 .001 .0012 .0015 .0018 .0022 .0025 .0027 .0033 .0039 .0047 .0051 .0056 .0062 .0068 .0075 .0082 .01 .012 015 .018 .022 .027 .033 779P6815400J 779P7515400J 779P8215400J 779P1025400J 779P1225400J 779P1525400J 779P1825400J 779P2225400J 779P2525400J 779P2725400J 779P3325400J 779P3925400J 779P4725400J 779P5125400J 779P5625400J 779P6225400J 779P6825400J 779P7525400J 779P8225400J 779P1035400J 779P1235400J 779P1535400J 770P1835400J 779P2235400J 779P2735400J 779P3335400J L MAX .75 .75 .75 .75 .75 .75 .75 .75 .75 .75 .75 .75 75 .75 .75 .75 .75 .75 .75 .75 .75 .75 .75 .75 .75 .75 (19.1) (19.1) (19.1) (19.1) (19.1) (19.1) (19.1) (19.1) (19.1) (19.1) (19.1) (19.1) (19.1) (19.1) (19.1) (19.1) (19.1) (19.1) (19.1) (19.1) (19.1) (19.1) (19.1) (19.1) (19.1) (19.1) T MAX .23 .24 .24 .24 .26 .23 .25 .26 .25 .21 .22 .23 .24 .24 .25 .26 .27 .28 .28 .30 .32 .33 .36 .39 43 .47 (5.9) (6.1) (6.1) (6.1) (6.6) (5.9) (6.4) (6.6) (6.4) (5.4) (5.6) (6.9) (6.1) (6.1) (6.4) (6.6) (6.9) (7.1) (7.1) (7.6) (8.1) (8.4) (9.1) (9.9) (10.9) (11.9) H MAX .37 .37 .38 .40 42 .37 .38 .40 41 .35 .36 .37 .40 41 .41 42 .43 44 47 .49 .51 .57 .60 .64 .68 .72 (9.4) (9.4) (9.7) (10.2) (13.2) (9.4) (9.7) (10.2) (10.1) (8.9) (9.1) (9.4) (10.2) (10.4) (10.4) (10.7) (10.9) (11.2) (11.9) (12.4) (13.0) (14.5) (15.2) (16.3) (17.3) (18.3) Seated Height .62 .62 .63 .65 .67 .62 .63 .65 .66 .60 .61 .62 .65 .66 .66 .67 .68 .69 .72 .74 .76 .82 .85 .89 .93 .97 (15.7) (15.7) (16.0) (16.5) (17.0) (15.7) (16.0) (16.5) (16.8) (15.2) (15.5) (15.7) (16.5) (16.8) (16.8) (17.0) (17.3) (17.5) (18.3) (18.8) (19.3) (20.8) (21.6) (22.6) (23.6) (24.6) Max dV/dt Peak I Max % D.F. Max ESR (m⍀) (Volts/µsec) Amps 20KHz 100KHz 20KHz 100KHz 64400 61300 58600 53100 48500 43300 39600 35800 33600 32300 29200 26900 24500 23500 22400 21300 20400 19400 18500 16800 15300 13700 12500 11300 10200 9200 65.7 69.0 72.1 79.6 87.2 97.5 106.8 118.1 125.9 130.8 144.6 157.3 172.6 179.8 188.4 198.3 207.6 218.1 228.0 251.8 275.8 308.4 337.8 373.5 413.8 457.4 .030 .030 .030 .030 .030 .030 .030 .030 .030 .031 .031 .031 .031 .031 .031 .031 .031 .031 .032 .032 .032 .032 .033 .033 .034 .035 .040 .040 .040 .040 .040 .043 .044 .044 .044 .046 .047 .047 .048 .048 .049 .049 .050 .050 .051 .053 .054 .057 .059 .063 .067 .072 3511 3183 2911 2387 1989 1592 1326 1085 955 914 748 633 525 484 441 398 363 329 311 255 212 170 146 119 100 84 936 849 776 637 531 456 389 318 280 271 227 192 163 150 139 126 117 106 99 84 72 60 52 46 39 35 * For complete part number please refer to Ordering/Part Number Information page. 1 Shaded part numbers, when ordered as ±5% tolerance with the B3 terminal style and lead length, are Standard Stock items available through the Sprague/Vishay Distribution Network. For complete part number please add the B3 suffix to the above part numbers in accordance with the Ordering Information (i.e. 779P4725400JB3). Other part numbers are available on special order. Dimensions in inches, metric (mm) in parenthesis. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 Type 778P/779P, Orange Drop®, Polypropylene Film/Foil Capacitors 400 VAC RMS Voltage vs. Frequency @ +85°C Voltage (RMS) Type 778P Frequency (KHz) Voltage (RMS) Type 779P Frequency (KHz) CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 Type 778P/779P, Orange Drop®, Polypropylene Film/Foil Capacitors 400 VAC |Z| (ohms) Typical Impedance vs. Frequency Frequency (MHz) Please note: Capacitance values above are in µF The resonant frequency and impedance shown above apply to units with a 0.250" lead length and are typical values only. Please contact us for additional data. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 AC Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and data (collectively, the “Information”) in this datasheet or other publication are subject to change. The customer is responsible for checking, confirming and verifying the extent to which the Information contained in this datasheet or other publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on the knowledge that the Cornell Dubilier company providing such statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representation regarding any such matter – and Cornell Dubilier specifically and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specific customer application, use, storage, transportation, or operating environment. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be required. 4