936C4W1P5K-F

936C4W1P5K-F

  • 厂商:

    CDE

  • 封装:

  • 描述:

    936C4W1P5K-F - Type 936C Axial Leaded Metallized Polypropylene Capacitor - Cornell Dubilier Electron...

  • 详情介绍
  • 数据手册
  • 价格&库存
936C4W1P5K-F 数据手册
Type 936C Axial Leaded Metallized Polypropylene Capacitor High Current Flat Axial Leaded Capacitors Type 936C flat axial leaded meltallized polypropylene capacitors are designed for 20 to 100 kHz switching power supply input filtering, DC blocking and output filter applications where high current, high capacitance and low ESR values are important. Dry sections are sealed with flame retandant outer wrap and epoxy end seals for moisture resistance. Highlights • Low ESR • High current • Flame retardant outer wrap and end seals Specifications Capacitance Range: Voltage Range: Capacitance Tolerance: Operating Temperature Range: Dielectric Strength: Dissipation Factor: Insulation Resistance: Life Test: 0.47 to 10.0 µF 400 to 600 Vdc (250 to 330 Vac) ±10% Standard, ±5% Optional –55 ºC to 105 ºC with full rated voltage at 85 ºC, derate lineraly to 50% of rated voltage at 105 ºC 200% of rated voltage for 1 minute 0.10% Max (25 ºC, 1 kHz) 200,000 MΩ x µF 1,000 hours at 85 ºC at 125% rated voltage Outline Drawing Complies with the EU Directive 2002/95/EC requirement restricting the use of Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent chromium (Cr(VI)), PolyBrominated Biphenyls (PBB) and PolyBrominated Diphenyl Ethers (PBDE). W ±.06" (1.5mm) Ratings Cap. (µF) .47 .68 1.0 1.5 2.0 2.2 3.3 4.7 6.8 10.0 0.47 0.68 1.0 1.5 2.2 Catalog Part Number 936C4P47K-F 936C4P68K-F 936C4W1K-F 936C4W1P5K-F 936C4W2K-F 936C4W2P2K-F 936C4W3P3K-F 936C4W4P7K-F 936C4W6P8K-F 936C4W10K-F 936C6P47K-F 936C6P68K-F 936C6W1K-F 936C6W1P5K-F 936C6W2P2K-F T Maximum Inches (mm) 0.280 0.300 0.390 0.480 0.480 0.560 0.690 0.640 0.670 0.700 0.460 0.550 0.670 0.730 0.640 (7.1) (7.6) (9.9) (12.2) (12.2) (14.2) (17.5) (16.3) (17.0) (17.8) (11.7) (14.0) (17.0) (18.5) (16.3) 1.625" (41mm) MIN. L ±.05" (1.2mm) 1.625" (41mm) MIN. T MAX. W L ±.06" (1.5) ±.05" (1.2) Inches (mm) Inches (mm) 400 Vdc (250 Vac) 0.470 (11.9) 1.250 (31.75) 0.530 (13.5) 1.250 (31.75) 0.590 (15.0) 1.250 (31.75) 0.690 (17.5) 1.250 (31.75) 0.690 (17.5) 1.250 (31.75) 0.830 (21.1) 1.250 (31.75) 0.930 (23.6) 1.250 (31.75) 0.880 (22.4) 1.750 (44.45) 0.900 (22.9) 2.250 (57.15) 1.050 (26.7) 2.250 (57.15) 600 Vdc (330 Vac) 0.690 (17.5) 1.250 (31.75) 0.790 (20.1) 1.250 (31.75) 0.910 (23.1) 1.250 (31.75) 0.970 (24.6) 1.500 (38.10) 0.880 (22.4) 2.250 (57.15) d Inches (mm) 0.032 0.032 0.032 0.032 0.032 0.032 0.032 0.040 0.040 0.040 0.032 0.032 0.032 0.032 0.040 (0.8) (0.8) (0.8) (0.8) (0.8) (0.8) (0.8) (1.0) (1.0) (1.0) (0.8) (0.8) (0.8) (0.8) (1.0) ESR IRMS (milliohms) A @ 70ºC 100 KHz 100 KHz 21 13 11 9 9 8 7 7 7 7 13 10 8 7 10 4 6 9 10 10 11 15 17 17 17 4 6 9 11 13 CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
936C4W1P5K-F
物料型号: - 936C4P68K-F - 936C4W1K-F - 936C4P47K-F - 936C4W1P5K-F - 936C4W2K-F - 936C4W2P2K-F - 936C4W3P3K-F - 936C4W4P7K-F - 936C4W6P8K-F - 936C4W10K-F - 936C6P68K-F - 936C6W1K-F - 936C6W1P5K-F - 936C6W2P2K-F - 936C6P47K-F

器件简介: Type 936C flat axial leaded metallized polypropylene capacitors,适用于20到100kHz开关电源输入滤波、直流阻断和输出滤波应用,这些场合需要高电流、高电容和低ESR值。干式卷绕体用阻燃外包装和环氧树脂端封来密封,以抵抗湿气。

引脚分配: - 引脚为轴向引线。

参数特性: - 电容范围:0.47到10.0 µF - 电压范围:400到600 Vdc(对应250到330 Vac) - 电容公差:标准±10%,可选±5% - 工作温度范围:-55 ºC到105 ºC,85 ºC时全额定电压,线性降额至105 ºC时额定电压的50% - 额定电压:1分钟200%额定电压 - 介质强度:0.10%最大(25 ºC,1 kHz) - 绝缘电阻:200,000 MΩ x µF - 寿命测试:85 ºC下125%额定电压1000小时

功能详解: 低ESR、高电流、阻燃外包装和端封。

应用信息: 用于开关电源输入滤波、直流阻断和输出滤波。

封装信息: 轴向引线式封装,具体尺寸见图示。
936C4W1P5K-F 价格&库存

很抱歉,暂时无法提供与“936C4W1P5K-F”相匹配的价格&库存,您可以联系我们找货

免费人工找货