T
Max
Type CD4 High-Frequency, Mica Capacitors
L
Max.
Ultra-HighFrequency Capacitor for CATV and RF Applications 0.1″ Lead Spacing
H
Max.
0.078"
Measured at
point where
phenolic cone
becomes a
cylinder
No Solder
Minuscule Pant Leg
Nearly the textbook ideal capacitor for highFrequency applications, Type
CD4 is rock stable over its full temperature and voltage range. Higher
self-resonant frequency and lower equivalent series inductance makes
CD4 even better than CD17 and CD18 for highFrequency applications. 0.1”
lead spacing means CD4 can replace ceramic capacitors on printed circuit
boards.
1.0"
Min.
S
±0.031
Highlights
CD16, CDV16 and CD4
•
T
Max
L
Max.
H
Max.
0.06"
Measured at
point where
phenolic cone
becomes a
cylinder
No Solder
Minuscule Pant Leg
1.0"
Min.
d
Specifications
S
±0.031
•
•
•
•
•
•
•
Higher self-resonant frequency and lower equivalent series inductance than CD17
and CD18
Low impedance to beyond 1 GHz
Replaces other 0.1” lead-spacing capacitors
Cool operation—Typical Qs > 2000
Shockproof and delamination free
Near zero capacitance change with frequency
and temperature
100,000 V/µs dV/dt capability minimum
•
Zero capacitance change with voltage
Click here to see ordering infomation
Capacitance Range
1 pF to 1,500 pF
Capacitance Tolerance
±½ pF (D), ±1 pF (C),±1⁄2% (E)±1% (F),±1% (F),±2% (G), ±5% (J)
Rated Voltage
100 Vdc & 500 Vdc
Operating Temperature Range
–55 °C to +125 °C
Regulatory Information
Ratings
(pF)
Catalog
Part Number
910
1000
1100
1200
1500
CD4FA911J03F
CD4FA102J03F
CD4FA112J03F
CD4FA122J03F
CD4FA152J03F
560
620
680
750
820
CD4FC561J03F
CD4FC621J03F
CD4FC681J03F
CD4FC751J03F
CD4FC821J03F
1
2
3
4
5
6
7
8
10
12
15
18
20
22
24
27
30
33
36
CD4CD010D03F
CD4CD020D03F
CD4CD03F0D03F
CD4CD040D03F
CD4CD050D03F
CD4CD060D03F
CD4CD070D03F
CD4CD080D03F
CD4CD100J03F
CD4CD120J03F
CD4CD150J03F
CD4CD180J03F
CD4ED200J03F
CD4ED220J03F
CD4ED240J03F
CD4ED270J03F
CD4ED300J03F
CD4ED330J03F
CD4ED360J03F
L
In (mm)
H
In (mm)
100 Vdc
.340 (8.6) .310 (7.9)
.340 (8.6) .310 (7.9)
.340 (8.6) .310 (7.9)
.340 (8.6) .310 (7.9)
.340 (8.6) .310 (7.9)
300 Vdc
.340 (8.6) .310 (7.9)
.340 (8.6) .310 (7.9)
.340 (8.6) .310 (7.9)
.340 (8.6) .310 (7.9)
.340 (8.6) .310 (7.9)
500 Vdc
.290 (7.4) .220 (5.6)
.290 (7.4) .220 (5.6)
.290 (7.4) .220 (5.6)
.290 (7.4) .220 (5.6)
.290 (7.4) .220 (5.6)
.290 (7.4) .220 (5.6)
.290 (7.4) .220 (5.6)
.290 (7.4) .220 (5.6)
.290 (7.4) .220 (5.6)
.290 (7.4) .220 (5.6)
.290 (7.4) .220 (5.6)
.290 (7.4) .220 (5.6)
.290 (7.4) .220 (5.6)
.290 (7.4) .220 (5.6)
.290 (7.4) .220 (5.6)
.290 (7.4) .220 (5.6)
.290 (7.4) .220 (5.6)
.290 (7.4) .220 (5.6)
.290 (7.4) .220 (5.6)
T
In (mm)
S
In (mm)
d
In (mm)
.160 (4.1)
.160 (4.1)
.160 (4.1)
.170 (4.3)
.180 (4.6)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.160 (4.1)
.160 (4.1)
.160 (4.1)
.160 (4.1)
.160 (4.1)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.110 (2.8)
.110 (2.8)
.110 (2.8)
.110 (2.8)
.110 (2.8)
.110 (2.8)
.110 (2.8)
.110 (2.8)
.110 (2.8)
.110 (2.8)
.110 (2.8)
.110 (2.8)
.110 (2.8)
.110 (2.8)
.110 (2.8)
.110 (2.8)
.110 (2.8)
.110 (2.8)
.110 (2.8)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
Catalog
(pF) Part Number
39 CD4ED390J03F
43 CD4ED430J03F
47 CD4ED470J03F
50 CD4ED500J03F
51 CD4ED510J03F
56 CD4ED560J03F
62 CD4ED620J03F
68 CD4ED680J03F
75 CD4ED750J03F
82 CD4ED820J03F
91 CD4FD910J03F
100 CD4FD101J03F
110 CD4FD111J03F
120 CD4FD121J03F
130 CD4FD131J03F
150 CD4FD151J03F
160 CD4FD161J03F
180 CD4FD181J03F
200 CD4FD201J03F
220 CD4FD221J03F
240 CD4FD241J03F
250 CD4FD251J03F
270 CD4FD271J03F
300 CD4FD301J03F
330 CD4FD331J03F
360 CD4FD361J03F
390 CD4FD391J03F
430 CD4FD431J03F
470 CD4FD471J03
500 CD4FD501J03
510 CD4FD511J03
L
In (mm)
.290 (7.4)
.290 (7.4)
.290 (7.4)
.290 (7.4)
.290 (7.4)
.290 (7.4)
.290 (7.4)
.290 (7.4)
.290 (7.4)
.290 (7.4)
.290 (7.4)
.290 (7.4)
.290 (7.4)
.290 (7.4)
.340 (8.6)
.340 (8.6)
.340 (8.6)
.340 (8.6)
.340 (8.6)
.340 (8.6)
.340 (8.6)
.340 (8.6)
.340 (8.6)
.340 (8.6)
.340 (8.6)
.340 (8.6)
.340 (8.6)
.340 (8.6)
.340 (8.6)
.340 (8.6)
.340 (8.6)
H
In (mm)
.220 (5.6)
.220 (5.6)
.220 (5.6)
.220 (5.6)
.220 (5.6)
.220 (5.6)
.220 (5.6)
.220 (5.6)
.220 (5.8)
.220 (5.8)
.220 (5.8)
.240 (6.1)
.240 (6.1)
.240 (6.1)
.310 (7.9)
.310 (7.9)
.310 (7.9)
.310 (7.9)
.310 (7.9)
.310 (7.9)
.310 (7.9)
.310 (7.9)
.310 (7.9)
.310 (7.9)
.310 (7.9)
.310 (7.9)
.310 (7.9)
.310 (7.9)
.310 (7.9)
.310 (7.9)
.310 (7.9)
T
In (mm)
.110 (2.8)
.110 (2.8)
.110 (2.8)
.110 (2.8)
.110 (2.8)
.110 (2.8)
.110 (2.8)
.110 (2.8)
.110 (2.8)
.110 (2.8)
.110 (2.8)
.110 (2.8)
.110 (2.8)
.110 (2.8)
.160 (4.1)
.160 (4.1)
.160 (4.1)
.160 (4.1)
.160 (4.1)
.160 (4.1)
.160 (4.1)
.160 (4.1)
.160 (4.1)
.160 (4.1)
.160 (4.1)
.160 (4.1)
.160 (4.1)
.160 (4.1)
.160 (4.1)
.160 (4.1)
.160 (4.1)
S
In (mm)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
d
In (mm)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
CDE Cornell Dubilier•1605 E. Rodney French Blvd.•New Bedford, MA 02744•Ph: (508)996-8561•Fax: (508)996-3830• www.cde.com
Type CD4 High-Frequency, Mica Capacitors
Typical Performance Curves
Insertion Loss
Over the frequency range of 100 MHz to 1 GHz
the insertion loss in a balanced 50 Ω or 75 Ω system is flat ±0.2 dB. A typical test setup is below.
Insertion Loss vs. Frequency for
CD17FC621JO3, 75 Ω System
Choosing CD4, CD16, CDV16, CD18 or CDV18
While insertion loss is flat within ±.2dB through 1 GHz,
you may be able to avoid the small notch by changing
the capacitor type to fit your capacitance. See table at
right.
TYPE
Flat to Above 1 GHz
CD17
470 pF max
CD4
620 pF max
CD16
870 pF
CDV16
870 pF
CD18
660 pF max
CDV18
1000 pF max
CDE Cornell Dubilier•1605 E. Rodney French Blvd.•New Bedford, MA 02744•Ph: (508)996-8561•Fax: (508)996-3830• www.cde.com
Type CD4 High-Frequency, Mica Capacitors
Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and data
(collectively, the “Information”) in this datasheet or other publication are subject to change. The customer
is responsible for checking, confirming and verifying the extent to which the Information contained in this
datasheet or other publication is applicable to an order at the time the order is placed. All Information given
herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation
or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based
on the knowledge that the Cornell Dubilier company providing such statements (“Cornell Dubilier”) has
of operating conditions that such Cornell Dubilier company regards as typical for such applications, but
are not intended to constitute any guarantee, warranty or representation regarding any such matter – and
Cornell Dubilier specifically and expressly disclaims any guarantee, warranty or representation concerning
the suitability for a specific customer application, use, storage, transportation, or operating environment.
The Information is intended for use only by customers who have the requisite experience and capability to
determine the correct products for their application. Any technical advice inferred from this Information or
otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given
gratis (unless otherwise specified by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability
for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality
and safety standards regarding the design and manufacturing of its products, in light of the current state
of the art, isolated component failures may still occur. Accordingly, customer applications which require a
high degree of reliability or safety should employ suitable designs or other safeguards (such as installation
of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the
failure of an electrical component does not result in a risk of personal injury or property damage. Although
all product-related warnings, cautions and notes must be observed, the customer should not assume that all
safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be
required.
CDE Cornell Dubilier•1605 E. Rodney French Blvd.•New Bedford, MA 02744•Ph: (508)996-8561•Fax: (508)996-3830• www.cde.com
很抱歉,暂时无法提供与“CD4FC821GO3F”相匹配的价格&库存,您可以联系我们找货
免费人工找货