CM04FA391GO3

Ordering Information Radial-Leaded Dipped Mica Capacitors Ordering Information Order by complete part number as below. For other options, write your requirements on your purchase order or request for quotation. Note: RoHS compliant not available for CD6, CD7 or MIL-C5 parts. Radial-Leaded Silvered Mica Capacitors (Except D7, D10*) CD15 C D Series Characteristic Code 100 J Capacitance Capacitance Tolerance (pF) Voltage (Vdc) Y = 50 Vdc F = 1000 Vdc 010 = 1 pF A = 100 Vdc H = 1500 Vdc (1.5) = 1.5 pF C = 300 Vdc J = 2000 Vdc 361 = 360 pF D = 500 Vdc K = 2500 Vdc 122 = 1200 pF Code Capacitance Standard Cap. ppm/ ºC Drift Range C –200 to +200 ±(0.5% +0.1pF) E –20 to +100 ±(0.1% +0.1 pF) 20–82 pF F 0 to +70 ±(0.05% +0.1 pF) 91 pF and up Vibration Grade No. Blank = Not Specified F= RoHS Compliant MIL-STD-202 Condition (Hz) 1 Method 201 10 to 55 3 Method 204 Condition D 10 to 2,000 Standard vibration grade is 3, the more Capacitance Tolerance severe requirement Capacitance Tol. ♦ Non-flammable units per IEC 695-2-2 are available for standard dipped capacitors. Specify IEC 695-2-2 on your order. ♦ Tape and reeling, specify per next page. ♦ “P” temperature range available for CD10, CD15, CD19, CD30, CD42, CDA15 ♦ For MIL-C-5 capacitors, see below. Temperature Range F Vibration 1–18 pF Options Available 3 O = –55 ºC to +125 ºC P = –55 ºC to +150 ºC Vibration Grade Characteristics Temp. Coeff. O Code Tolerance Range C ±1 pF 1– 9 pF D ±1⁄2 pF 1–99 pF E ±1⁄2 % 100 pF and up F ±1 % 50 pF and up G ±2 % 25 pF and up H ±3 % 18 pF and up J ±5 % 10 pF and up Standard tolerance is ±½ pF for less than 10 pF and ±5% for 10 pF and up MIL-C-5 Capacitors Capacitors are available marked and manufactured to the requirements of standard MIL-C-5. To order the MILC-5 part number, change the Catalog Number by replacing the CDE type with the MIL-C-5 Style Number using the table below. Example: Change CD15ED470J03 to CM05ED470J03. The following ratings have no MIL-C-5 equivalents: CDE MIL-C-5 Type Number Style Number CD10 CM04 CM09 CD15 CM05 CM10 CD19 CM06 CM11 CD30 CM07 CM12 Type CD10: 2, 3, 4, 50, 250 and 400 pF Type CD15: 2, 3, 4, 50, 250, 430 and higher pF Type CD19: 390 and lower pF, 2,500 pF, and 5000 and higher pF Type CD30: 5,000 and lower pF, 33,000 and higheer pF * Order Type D7 and D10 using the Catalog Numbers shown in the ratings tables. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com Ordering Information, Radial-Leaded, Mica Capacitors Ordering Information Dipped Mica Capacitors for Auto Insertion T max. L max. For high-volume auto insertion applications, the bestvalue choice is Type CDA15. Reel packing is also available for Types CD4, CD5, CD10, CD15, CD17, CD19, CM04, and CM05. H max. .078 .250 ± .051 h ± .020 .354 + .030 – .020 .709 + .039 – .020 Reel Packing with .200″ lead spacing is available for Types CD5, and CD10. To order .200″ lead spacing, change the Catalog Number by inserting the letter “A” in the CDE Type. Example: Type CD5 capacitors, reel packed with .200" lead spacing, is designated as Type CDA5. .202 ± .028 S ± .031 .035 max. .157 ± .012 .500 ± .012 Lead Configurations A B For tape and reel or ammo-packed packaging, specify on the order. See the table below for available reel-packed types, lead configurations, lead spacing, lead material, pieces per reel and pieces per ammo packs. Packaging will be in accordance with EIA-468. Dimension h will be 16mm for formed leads or 18mm for straight leads. 20mm is available on special request. Specify reel or ammo on your purchase order. C Type Number CD4 Lead Spacing .100 Lead Configuration A Lead Material CCS CD5 .120 A CCS CDA5 D10 CD10/CM04 CDA10 CD15/CM05 CD17 .200 B CCS .141 .200 .234 A C A CCS CCS CCS CD16 CDV16 .234 A CCS CDA15 CDA17 .200 A, C Copper CD19 .344 A CCS Capacitance Range 1– 560 pF 561– 780 pF 781–1500 pF 1–158 pF 159–256 pF 257–400 pF 1– 265 pF 266– 470 pF 471–1200 pF 1– 330 pF 331– 470 pF 471–1500 pF 1– 330 pF 331– 470 pF 471–1500 pF 1501–2000 pF > 2000 pF 1– 330 pF 331– 470 pF 471–1500 pF 10-1000 pF 1001-1500 pF 1501–3000 pF 3001-5000 pF Range of Pieces per Reel 1000–2500 1000–2000 1000–1500 1000–2500 1000–2000 1000–1500 1000–2500 1000–2000 1000–1500 1000–2500 1000–2000 1000–1500 1000–2500 1000–2000 1000–1500 800 500 1000–2500 1000–2000 1000–1500 1000 800 500 400 Range of Pieces per Ammo Pack 1000–2000 1000–1500 1000 1000–2000 1000–1500 1000 1000–2000 1000–1500 1000 1000–2000 1000–1500 1000 1000–2000 1000–1500 1000 600 400 1000–2000 1000–1500 1000 800 800 400 400 CCS = copper-clad steel CDA indicates .200 lead spacing for a bulk part. If you want it configured for auto insertion, it must be so noted on the order (i.e. tape/reel or ammo pack the referenced parts)