CMR04E390GODR

Type CMR, High-Reliability, Mica Capacitors High-Reliability Dipped Capacitors/MIL-PRF-39001 Type CMR meets requirement of MIL-PRF-39001, Type CMR high-reliability dipped silvered mica capacitors are ideal for high-grade ground, airborne, and spaceborne devices, such as computers, jetcraft, and missiles. Standard, Miniature Dipped Mica and T Max L Max. H Max. 0.078" Measured at point where phenolic cone becomes a cylinder 1.0" Min. No Solder Minuscule Pant Leg d S ±0.031 Regulatory Information Specifications CD16, CDV16 and CD4 Voltage Range: 50 Vdc to 500 Vdc Capacitance Range: 1 pF to 91,000 pF L Max. Capacitance Tolerance: ±½ pF (D), ±1% (F), ±2% (G), ±5% (J) Temperature Range: –55 ºC to +125 ºC (O), –55 ºC toH 150 ºC (P) Max. 0.06" P temperature range available only for CMR04, CMR05, CMR06, CMR07, CMR08 Measured at where point Reliability: Meets Requirements of phenolic MIL-PRF-39001 No Solder cone Minuscule a Established reliability tobecomes .01%/1,000 hours failure rate Pant Leg cylinder Ratings and Dimensions Cap (pF) Catalog Part Number L in (mm) H in (mm) T in (mm) S in (mm) d in (mm) 22 24 27 30 33 36 39 43 47 51 56 62 68 75 82 91 100 110 120 130 CMR03E220DOYR CMR03E240DOYR CMR03E270JOYR CMR03E300JOYR CMR03E330JOYR CMR03E360JOYR CMR03E390JOYR CMR03E430JOYR CMR03E470JOYR CMR03E510JOYR CMR03E560JOYR CMR03E620JOYR CMR03E680JOYR CMR03E750JOYR CMR03E820JOYR CMR03F910JOYR CMR03F101JOYR CMR03F111JOYR CMR03F121JOYR CMR03F131JOYR .270 (6.9) .270 (6.9) .270 (6.9) .270 (6.9) .270 (6.9) .270 (6.9) .270 (6.9) .270 (6.9) .270 (6.9) .270 (6.9) .270 (6.9) .270 (6.9) .270 (6.9) .270 (6.9) .270 (6.9) .270 (6.9) .270 (6.9) .270 (6.9) .270 (6.9) .270 (6.9) 50 Vdc .190 (4.8) .190 (4.8) .190 (4.8) .190 (4.8) .190 (4.8) .190 (4.8) .190 (4.8) .190 (4.8) .190 (4.8) .190 (4.8) .200 (5.1) .200 (5.1) .200 (5.1) .200 (5.1) .200 (5.1) .200 (5.1) .200 (5.1) .200 (5.1) .200 (5.1) .210 (5.3) .110 (2.8) .110 (2.8) .110 (2.8) .110 (2.8) .110 (2.8) .110 (2.8) .120 (3.0) .120 (3.0) .120 (3.0) .120 (3.0) .120 (3.0) .120 (3.0) .120 (3.0) .120 (3.0) .120 (3.0) .130 (3.3) .130 (3.3) .130 (3.3) .130 (3.3) .130 (3.3) .120 (3.0) .120 (3.0) .120 (3.0) .120 (3.0) .120 (3.0) .120 (3.0) .120 (3.0) .120 (3.0) .120 (3.0) .120 (3.0) .120 (3.0) .120 (3.0) .120 (3.0) .120 (3.0) .120 (3.0) .120 (3.0) .120 (3.0) .120 (3.0) .120 (3.0) .120 (3.0) .016 (.4) .016 (.4) .016 (.4) .016 (.4) .016 (.4) .016 (.4) .016 (.4) .016 (.4) .016 (.4) .016 (.4) .016 (.4) .016 (.4) .016 (.4) .016 (.4) .016 (.4) .016 (.4) .016 (.4) .016 (.4) .016 (.4) .016 (.4) Cap (pF) Catalog Part Number L in (mm) 150 160 180 200 220 240 270 300 330 360 390 400 CMR03F151JOYR CMR03F161JOYR CMR03F181JOYR CMR03F201JOYR CMR03F221JOYR CMR03F241JOYR CMR03F271JOYR CMR03F301JOYR CMR03F331JOYR CMR03F361JOYR CMR03F391JOYR CMR03F401JOYR .270 (6.9) .270 (6.9) .270 (6.9) .270 (6.9) .270 (6.9) .270 (6.9) .270 (6.9) .270 (6.9) .270 (6.9) .270 (6.9) .270 (6.9) .270 (6.9) 15 18 20 22 24 27 30 33 CMR03C150DOAR CMR03C180DOAR CMR03E200DOAR CMR03E220DOAR CMR03E240DOAR CMR03E270JOAR CMR03E300JOAR CMR03E330JOAR .270 (6.9) .270 (6.9) .270 (6.9) .270 (6.9) .270 (6.9) .270 (6.9) .270 ( 6.9) .270 ( 6.9) S H±0.031 T in (mm) in (mm) .210 (5.3) .210 (5.3) .210 (5.3) .220 (5.6) .220 (5.6) .220 (5.6) .230 (5.8) .230 (5.8) .240 (6.1) .240 (6.1) .250 (6.4) .250 (6.4) 100 Vdc .190 (4.8) .190 (4.8) .190 (4.8) .190 (4.8) .190 (4.8) .190 (4.8) .200 ( 5.1) .200 ( 5.1) T Max 1.0" Min. S in (mm) d in (mm) .140 (3.6) .140 (3.6) .140 (3.6) .150 (3.8) .150 (3.8) .160 (4.1) .160 (4.1) .170 (4.3) .180 (4.6) .180 (4.6) .190 (4.8) .190 (4.8) .120 (3.0) .120 (3.0) .120 (3.0) .120 (3.0) .120 (3.0) .120 (3.0) .120 (3.0) .120 (3.0) .120 (3.0) .120 (3.0) .120 (3.0) .120 (3.0) .016 (.4) .016 (.4) .016 (.4) .016 (.4) .016 (.4) .016 (.4) .016 (.4) .016 (.4) .016 (.4) .016 (.4) .016 (.4) .016 (.4) .110 (2.8) .110 (2.8) .110 (2.8) .120 (3.0) .120 (3.0) .120 (3.0) .120 ( 3.0) .120 ( 3.0) .120 (3.0) .120 (3.0) .120 (3.0) .120 (3.0) .120 (3.0) .120 (3.0) .120 ( 3.0) .120 ( 3.0) .016 (.4) .016 (.4) .016 (.4) .016 (.4) .016 (.4) .016 (.4) .016 ( .4) .016 ( .4) CDE Cornell Dubilier•1605 E. Rodney French Blvd.•New Bedford, MA 02744•Ph: (508)996-8564•Fax: (508)996-3830• www.cde.com Type CMR, High-Reliability, Mica Capacitors Cap (pF) Catalog Part Number L in (mm) 36 39 43 47 51 56 62 68 75 82 91 100 110 120 130 150 160 170 180 200 330 360 390 75000 82000 91000 CMR03E360JOAR CMR03E390JOAR CMR03E430JOAR CMR03E470JOAR CMR03E510JOAR CMR03E560JOAR CMR03E620JOAR CMR03E680JOAR CMR03E750JOAR CMR03E820JOAR CMR03F910JOAR CMR03F101JOAR CMR03F111JOAR CMR03F121JOAR CMR03F131JOAR CMR03F151JOAR CMR03F161JOAR CMR03F171JOAR CMR03F181JOAR CMR03F201JOAR CMR04F331JOAR CMR04F361JOAR CMR04F391JOAR CMR08F753JOAR CMR08F823JOAR CMR08F913JOAR .270 ( 6.9) .270 ( 6.9) .270 ( 6.9) .270 ( 6.9) .270 ( 6.9) .270 ( 6.9) .270 ( 6.9) .270 ( 6.9) .270 ( 6.9) .270 ( 6.9) .270 ( 6.9) .270 ( 6.9) .270 ( 6.9) .270 ( 6.9) .270 ( 6.9) .270 ( 6.9) .270 ( 6.9) .270 ( 6.9) .270 ( 6.9) .270 ( 6.9) .390 ( 9.9) .390 ( 9.9) .390 ( 9.9) 1.47 (37.3) 1.48 (37.6) 1.50 (38.1) 1 1.5 2 2.5 3 3.5 4 4.5 5 6 7 8 9 10 11 12 15 18 20 22 24 27 30 33 36 39 43 47 51 56 CMR03C1R0DOCR CMR03C1R5DOCR CMR03C2R0DOCR CMR03C2R5DOCR CMR03C3R0DOCR CMR03C3R5DOCR CMR03C4R0DOCR CMR03C4R5DOCR CMR03C5R0DOCR CMR03C6R0DOCR CMR03C7R0DOCR CMR03C8R0DOCR CMR03C9R0DOCR CMR03C100DOCR CMR03C110DOCR CMR03C120DOCR CMR03C150DOCR CMR03C180DOCR CMR03E200DOCR CMR03E220DOCR CMR03E240DOCR CMR03E270JOCR CMR03E300JOCR CMR03E330JOCR CMR03E360JOCR CMR03E390JOCR CMR03E430JOCR CMR03E470JOCR CMR03E510JOCR CMR03E560JOCR .270 ( 6.9) .270 ( 6.9) .270 ( 6.9) .270 ( 6.9) .270 ( 6.9) .270 ( 6.9) .270 ( 6.9) .270 ( 6.9) .270 ( 6.9) .270 ( 6.9) .270 ( 6.9) .270 ( 6.9) .270 ( 6.9) .270 ( 6.9) .270 ( 6.9) .270 ( 6.9) .270 ( 6.9) .270 ( 6.9) .270 ( 6.9) .270 ( 6.9) .270 ( 6.9) .270 ( 6.9) .270 ( 6.9) .270 ( 6.9) .270 ( 6.9) .270 ( 6.9) .270 ( 6.9) .270 ( 6.9) .270 ( 6.9) .270 ( 6.9) H in (mm) T in (mm) .200 ( 5.1) .120 ( 3.0) .200 ( 5.1) .120 ( 3.0) .200 ( 5.1) .120 ( 3.0) .200 ( 5.1) .130 ( 3.3) .200 ( 5.1) .130 ( 3.3) .200 ( 5.1) .130 ( 3.3) .210 ( 5.3) .130 ( 3.3) .210 ( 5.3) .140 ( 3.6) .210 ( 5.3) .140 ( 3.6) .210 ( 5.3) .140 ( 3.6) .210 ( 5.3) .140 ( 3.6) .220 ( 5.6) .150 ( 3.8) .220 ( 5.6) .150 ( 3.8) .220 ( 5.6) .160 ( 4.1) .230 ( 5.8) .160 ( 4.1) .230 ( 5.8) .170 ( 4.3) .240 ( 6.1) .170 ( 4.3) .240 ( 6.1) .180 ( 4.6) .240 ( 6.1) .180 ( 4.6) .250 ( 6.4) .190 ( 4.8) .380 ( 9.7) .220 ( 5.6) .380 ( 9.7) .220 ( 5.6) .380 ( 9.7) .220 ( 5.6) .910 (23.1) .440 (11.2) .920 (23.3) .460 (11.7) .940 (23.9) .500 (12.7) 300 Vdc .190 ( 4.8) .110 ( 2.8) .190 ( 4.8) .110 ( 2.8) .190 ( 4.8) .110 ( 2.8) .190 ( 4.8) .110 ( 2.8) .190 ( 4.8) .110 ( 2.8) .190 ( 4.8) .110 ( 2.8) .190 ( 4.8) .110 ( 2.8) .190 ( 4.8) .110 ( 2.8) .190 ( 4.8) .110 ( 2.8) .190 ( 4.8) .110 ( 2.8) .190 ( 4.8) .110 ( 2.8) .190 ( 4.8) .110 ( 2.8) .190 ( 4.8) .110 ( 2.8) .190 ( 4.8) .110 ( 2.8) .190 ( 4.8) .110 ( 2.8) .190 ( 4.8) .110 ( 2.8) .190 ( 4.8) .120 ( 3.0) .200 ( 5.1) .120 ( 3.0) .200 ( 5.1) .120 ( 3.0) .200 ( 5.1) .120 ( 3.0) .200 ( 5.1) .120 ( 3.0) .200 ( 5.1) .130 ( 3.3) .200 ( 5.1) .130 ( 3.3) .200 ( 5.1) .130 ( 3.3) .210 ( 5.3) .130 ( 3.3) .210 ( 5.3) .130 ( 3.3) .210 ( 5.3) .140 ( 3.6) .210 ( 5.3) .140 ( 3.6) .210 ( 5.3) .140 ( 3.6) .220 ( 5.6) .150 ( 3.8) S in (mm) d in (mm) Cap (pF) Catalog Part Number L in (mm) .120 ( 3.0) .120 ( 3.0) .120 ( 3.0) .120 ( 3.0) .120 ( 3.0) .120 ( 3.0) .120 ( 3.0) .120 ( 3.0) .120 ( 3.0) .120 ( 3.0) .120 ( 3.0) .120 ( 3.0) .120 ( 3.0) .120 ( 3.0) .120 ( 3.0) .120 ( 3.0) .120 ( 3.0) .120 ( 3.0) .120 ( 3.0) .120 ( 3.0) .150 ( 3.8) .150 ( 3.8) .150 ( 3.8) 1.05 (26.7) 1.05 (26.7) 1.05 (26.7) .016 ( .4) .016 ( .4) .016 ( .4) .016 ( .4) .016 ( .4) .016 ( .4) .016 ( .4) .016 ( .4) .016 ( .4) .016 ( .4) .016 ( .4) .016 ( .4) .016 ( .4) .016 ( .4) .016 ( .4) .016 ( .4) .016 ( .4) .016 ( .4) .016 ( .4) .016 ( .4) .016 ( .4) .016 ( .4) .016 ( .4) .040 (1.02) .040 (1.02) .040 (1.02) 62 68 75 82 91 100 110 120 270 300 56000 62000 68000 CMR03E620JOCR CMR03E680JOCR CMR03E750JOCR CMR03E820JOCR CMR03F910JOCR CMR03F101JOCR CMR03F111JOCR CMR03F121JOCR CMR04F271JOCR CMR04F301JOCR CMR08F563JOCR CMR08F623JOCR CMR08F683JOCR .270 ( 6.9) .270 ( 6.9) .270 ( 6.9) .270 ( 6.9) .270 ( 6.9) .270 ( 6.9) .270 ( 6.9) .270 ( 6.9) .390 ( 9.9) .390 ( 9.9) 1.46 (37.1) 1.47 (37.3) 1.48 (37.6) .120 ( 3.0) .120 ( 3.0) .120 ( 3.0) .120 ( 3.0) .120 ( 3.0) .120 ( 3.0) .120 ( 3.0) .120 ( 3.0) .120 ( 3.0) .120 ( 3.0) .120 ( 3.0) .120 ( 3.0) .120 ( 3.0) .120 ( 3.0) .120 ( 3.0) .120 ( 3.0) .120 ( 3.0) .120 ( 3.0) .120 ( 3.0) .120 ( 3.0) .120 ( 3.0) .120 ( 3.0) .120 ( 3.0) .120 ( 3.0) .120 ( 3.0) .120 ( 3.0) .120 ( 3.0) .120 ( 3.0) .120 ( 3.0) .120 ( 3.0) .016 ( .4) .016 ( .4) .016 ( .4) .016 ( .4) .016 ( .4) .016 ( .4) .016 ( .4) .016 ( .4) .016 ( .4) .016 ( .4) .016 ( .4) .016 ( .4) .016 ( .4) .016 ( .4) .016 ( .4) .016 ( .4) .016 ( .4) .016 ( .4) .016 ( .4) .016 ( .4) .016 ( .4) .016 ( .4) .016 ( .4) .016 ( .4) .016 ( .4) .016 ( .4) .016 ( .4) .016 ( .4) .016 ( .4) .016 ( .4) 1 1 1.5 1.5 2 2 2.5 2.5 3 3 3.5 3.5 4 4 4.5 4.5 5 5 6 6 7 7 8 8 9 9 10 10 11 11 12 12 15 15 18 18 20 20 22 22 24 24 27 CMR04C1R0DODR CMR05C1R0DODR CMR04C1R5DODR CMR05C1R5DODR CMR04C2R0DODR CMR05C2R0DODR CMR04C2R5DODR CMR05C2R5DODR CMR04C3R0DODR CMR05C3R0DODR CMR04C3R5DODR CMR05C3R5DODR CMR04C4R0DODR CMR05C4R0DODR CMR04C4R5DODR CMR05C4R5DODR CMR04C5R0DODR CMR05C5R0DODR CMR04C6R0DODR CMR05C6R0DODR CMR04C7R0DODR CMR05C7R0DODR CMR04C8R0DODR CMR05C8R0DODR CMR04C9R0DODR CMR05C9R0DODR CMR04C100DODR CMR05C100DODR CMR04C110DODR CMR05C110DODR CMR04C120JODR CMR05C120JODR CMR04C150JODR CMR05C150JODR CMR04C180JODR CMR05C180JODR CMR04E200JODR CMR05E200JODR CMR04E220JODR CMR05E220J0DR CMR04E240JODR CMR05E240JODR CMR04E270JODR .360 ( 9.1) .450 (11.4) .360 ( 9.1) .450 (11.4) .360 ( 9.1) .450 (11.4) .360 ( 9.1) .450 (11.4) .360 ( 9.1) .450 (11.4) .360 ( 9.1) .450 (11.4) .360 ( 9.1) .450 (11.4) .360 ( 9.1) .450 (11.4) .360 ( 9.1) .450 (11.4) .360 ( 9.1) .450 (11.4) .360 ( 9.1) .450 (11.4) .360 ( 9.1) .450 (11.4) .360 ( 9.1) .450 (11.4) .360 ( 9.1) .450 (11.4) .360 ( 9.1) .450 (11.4) .360 ( 9.1) .450 (11.4) .360 ( 9.1) .450 (11.4) .360 ( 9.1) .450 (11.4) .360 ( 9.1) .450 (11.4) .360 ( 9.1) .450 (11.4) .360 ( 9.1) .450 (11.4) .370 ( 9.4) H in (mm) T in (mm) .220 ( 5.6) .150 ( 3.8) .220 ( 5.6) .150 ( 3.8) .230 ( 5.8) .160 ( 4.1) .230 ( 5.8) .160 ( 4.1) .230 ( 5.8) .170 ( 4.3) .240 ( 6.1) .180 ( 4.6) .240 ( 6.1) .180 ( 4.6) .250 ( 6.4) .190 ( 4.8) .380 ( 9.7) .220 ( 5.6) .380 ( 9.7) .220 ( 5.6) .910 (23.1) .420 (10.7) .920 (23.3) .450 (11.4) .920 (23.3) .470 (11.9) 500 Vdc .330 ( 8.4) .190 ( 4.8) .360 ( 9.1) .170 ( 4.3) .330 ( 8.4) .190 ( 4.8) .360 ( 9.1) .170 ( 4.3) .330 ( 8.4) .190 ( 4.8) .360 ( 9.1) .170 ( 4.3) .330 ( 8.4) .190 ( 4.8) .360 ( 9.1) .170 ( 4.3) .330 ( 8.4) .190 ( 4.8) .360 ( 9.1) .170 ( 4.3) .330 ( 8.4) .190 ( 4.8) .360 ( 9.1) .170 ( 4.3) .330 ( 8.4) .190 ( 4.8) .360 ( 9.1) .170 ( 4.3) .330 ( 8.4) .190 ( 4.8) .360 ( 9.1) .170 ( 4.3) .330 ( 8.4) .190 ( 4.8) .360 ( 9.1) .170 ( 4.3) .330 ( 8.4) .190 ( 4.8) .360 ( 9.1) .170 ( 4.3) .330 ( 8.4) .190 ( 4.8) .360 ( 9.1) .170 ( 4.3) .330 ( 8.4) .190 ( 4.8) .360 ( 9.1) .170 ( 4.3) .330 ( 8.4) .190 ( 4.8) .360 ( 9.1) .170 ( 4.3) .330 ( 8.4) .190 ( 4.8) .360 ( 9.1) .170 ( 4.3) .330 ( 8.4) .190 ( 4.8) .360 ( 9.1) .170 ( 4.3) .330 ( 8.4) .190 ( 4.8) .360 ( 9.1) .170 ( 4.3) .330 ( 8.4) .190 ( 4.8) .360 ( 9.1) .170 ( 4.3) .330 ( 8.4) .190 ( 4.8) .360 ( 9.1) .170 ( 4.3) .330 ( 8.4) .190 ( 4.8) .360 ( 9.1) .170 ( 4.3) .330 ( 8.4) .190 ( 4.8) .360 ( 9.1) .170 (4.3) .330 ( 8.4) .190 (4.8) .360 ( 9.1) .170 (4.3) .330 ( 8.4) .190 (4.8) S in (mm) d in (mm) .120 ( 3.0) .120 ( 3.0) .120 ( 3.0) .120 ( 3.0) .120 ( 3.0) .120 ( 3.0) .120 ( 3.0) .120 ( 3.0) .150 ( 3.8) .150 ( 3.8) 1.05 (26.7) 1.05 (26.7) 1.05 (26.7) .016 ( .4) .016 ( .4) .016 ( .4) .016 ( .4) .016 ( .4) .016 ( .4) .016 ( .4) .016 ( .4) .016 ( .4) .016 ( .4) .040 (1.02) .040 (1.02) .040 (1.02) .150 ( 3.8) .225 ( 5.7) .150 ( 3.8) .225 ( 5.7) .150 ( 3.8) .225 ( 5.7) .150 ( 3.8) .225 ( 5.7) .150 ( 3.8) .225 ( 5.7) .150 ( 3.8) .225 ( 5.7) .150 ( 3.8) .225 ( 5.7) .150 ( 3.8) .225 ( 5.7) .150 ( 3.8) .225 ( 5.7) .150 ( 3.8) .225 ( 5.7) .150 ( 3.8) .225 ( 5.7) .150 ( 3.8) .225 ( 5.7) .150 ( 3.8) .225 ( 5.7) .150 ( 3.8) .225 ( 5.7) .150 ( 3.8) .225 ( 5.7) .150 ( 3.8) .225 ( 5.7) .150 ( 3.8) .225 ( 5.7) .150 ( 3.8) .225 ( 5.7) .150 ( 3.8) .225 ( 5.7) .150 ( 3.8) .225 (5.7) .150 (3.8) .225 (5.7) .150 (3.8) .016 ( .4) .025 ( .6) .016 ( .4) .025 ( .6) .016 ( .4) .025 ( .6) .016 ( .4) .025 ( .6) .016 ( .4) .025 ( .6) .016 ( .4) .025 ( .6) .016 ( .4) .025 ( .6) .016 ( .4) .025 ( .6) .016 ( .4) .025 ( .6) .016 ( .4) .025 ( .6) .016 ( .4) .025 ( .6) .016 ( .4) .025 ( .6) .016 ( .4) .025 ( .6) .016 ( .4) .025 ( .6) .016 ( .4) .025 ( .6) .016 ( .4) .025 ( .6) .016 ( .4) .025 ( .6) .016 ( .4) .025 ( .6) .016 ( .4) .025 ( .6) .016 ( .4) .025 (.6) .016 (.4) .025 (.6) .016 (.4) CDE Cornell Dubilier•1605 E. Rodney French Blvd.•New Bedford, MA 02744•Ph: (508)996-8564•Fax: (508)996-3830• www.cde.com Type CMR, High-Reliability, Mica Capacitors Cap (pF) Catalog Part Number L in (mm) H in (mm) T in (mm) S in (mm) d in (mm) Cap (pF) Catalog Part Number L in (mm) 27 30 30 33 33 36 36 39 39 43 43 47 47 51 51 56 56 62 62 68 68 75 75 82 82 91 91 100 100 110 110 120 120 130 130 150 150 160 160 180 180 200 200 220 220 240 240 270 300 330 CMR05E270JODR CMR04E300JODR CMR05E300JODR CMR04E330JODR CMR05E330JODR CMR04E360JODR CMR05E360JODR CMR04E390JODR CMR05E390JODR CMR04E430JODR CMR05E430JODR CMR04E470JODR CMR05E470JODR CMR04E510JODR CMR05E510JODR CMR04E560JODR CMR05E560JODR CMR04E620JODR CMR05E620JODR CMR04E680JODR CMR05E680JODR CMR04E750JODR CMR05E750JODR CMR04E820JODR CMR05E820JODR CMR04F910JODR CMR05F910JODR CMR04F101JODR CMR05F101JODR CMR04F111JODR CMR05F111JODR CMR04F121JODR CMR05F121JODR CMR04F131JODR CMR05F131JODR CMR04F151JODR CMR05F151JODR CMR04F161JODR CMR05F161JODR CMR04F181JODR CMR05F181JODR CMR04F201JODR CMR05F201JODR CMR04F221JODR CMR05F221JODR CMR04F241JODR CMR05F241JODR CMR05F271JODR CMR05F301JODR CMR05F331JODR .450 (11.4) .370 ( 9.4) .450 (11.4) .370 ( 9.4) .450 (11.4) .370 ( 9.4) .450 (11.4) .370 ( 9.4) .450 (11.4) .370 ( 9.4) .450 (11.4) .370 ( 9.4) .450 (11.4) .370 ( 9.4) .450 (11.4) .370 ( 9.4) .450 (11.4) .370 ( 9.4) .450 (11.4) .370 ( 9.4) .450 (11.4) .370 ( 9.4) .450 (11.4) .370 ( 9.4) .450 (11.4) .370 ( 9.4) .460 (11.7) .370 ( 9.4) .460 (11.7) .380 ( 9.7) .460 (11.7) .380 ( 9.7) .460 (11.7) .380 ( 9.7) .460 (11.7) .380 ( 9.7) .460 (11.7) .380 ( 9.7) .460 (11.7) .380 ( 9.7) .460 (11.7) .390 ( 9.9) .460 (11.7) .390 ( 9.9) .460 (11.7) .390 ( 9.9) .460 (11.7) .470 (11.9) .470 (11.9) .470 (11.9) .360 ( 9.1) .340 ( 8.6) .360 ( 9.1) .340 ( 8.6) .360 ( 9.1) .340 ( 8.6) .360 ( 9.1) .340 ( 8.6) .360 ( 9.1) .340 ( 8.6) .360 ( 9.1) .340 ( 8.6) .360 ( 9.1) .340 ( 8.6) .360 ( 9.1) .340 ( 8.6) .360 ( 9.1) .340 ( 8.6) .360 ( 9.1) .340 ( 8.6) .360 ( 9.1) .340 ( 8.6) .360 ( 9.1) .350 ( 8.9) .360 ( 9.1) .350 ( 8.9) .360 ( 9.1) .350 ( 8.9) .360 ( 9.1) .350 ( 8.9) .370 ( 9.4) .350 ( 8.9) .370 ( 9.4) .360 ( 9.1) .370 ( 9.4) .360 ( 9.1) .370 ( 9.4) .360 ( 9.1) .370 ( 9.4) .370 ( 9.4) .370 ( 9.4) .380 ( 9.7) .380 ( 9.7) .380 ( 9.7) .380 ( 9.7) .380 ( 9.7) .380 ( 9.7) .390 ( 9.9) .390 ( 9.9) .390 ( 9.9) .170 (4.3) .190 (4.8) .170 (4.3) .190 (4.8) .170 (4.3) .190 (4.8) .170 (4.3) .190 (4.8) .170 (4.3) .190 (4.8) .170 (4.3) .190 (4.8) .170 (4.3) .190 (4.8) .170 (4.3) .190 (4.8) .170 (4.3) .190 (4.8) .170 (4.3) .190 (4.8) .180 (4.6) .200 (5.1) .180 (4.6) .200 (5.1) .180 (4.6) .200 (5.1) .180 (4.6) .200 (5.1) .180 (4.6) .200 (5.1) .180 (4.6) .200 (5.1) .180 (4.6) .200 (5.1) .180 (4.6) .210 (5.3) .190 (4.8) .210 (5.3) .190 (4.8) .210 (5.3) .190 (4.8) .220 (5.6) .190 (4.8) .220 (5.6) .200 (5.1) .220 (5.6) .200 (5.1) .210 (5.3) .210 (5.3) .210 (5.3) .225 (5.7) .150 (3.8) .225 (5.7) .150 (3.8) .225 (5.7) .150 (3.8) .225 (5.7) .150 (3.8) .225 (5.7) .150 (3.8) .225 (5.7) .150 (3.8) .225 (5.7) .150 (3.8) .225 (5.7) .150 (3.8) .225 (5.7) .150 (3.8) .225 (5.7) .150 (3.8) .225 (5.7) .150 (3.8) .225 (5.7) .150 (3.8) .225 (5.7) .150 (3.8) .225 (5.7) .150 (3.8) .225 (5.7) .150 (3.8) .225 (5.7) .150 (3.8) .225 (5.7) .150 (3.8) .225 (5.7) .150 (3.8) .225 (5.7) .150 (3.8) .225 (5.7) .150 (3.8) .225 (5.7) .150 (3.8) .225 (5.7) .150 (3.8) .225 (5.7) .150 (3.8) .225 (5.7) .225 (5.7) .225 (5.7) .225 (5.7) .025 (.6) .016 (.4) .025 (.6) .016 (.4) .025 (.6) .016 (.4) .025 (.6) .016 (.4) .025 (.6) .016 (.4) .025 (.6) .016 (.4) .025 (.6) .016 (.4) .025 (.6) .016 (.4) .025 (.6) .016 (.4) .025 (.6) .016 (.4) .025 (.6) .016 (.4) .025 (.6) .016 (.4) .025 (.6) .016 (.4) .025 (.6) .016 (.4) .025 (.6) .016 (.4) .025 (.6) .016 (.4) .025 (.6) .016 (.4) .025 (.6) .016 (.4) .025 (.6) .016 (.4) .025 (.6) .016 (.4) .025 (.6) .016 (.4) .025 (.6) .016 (.4) .025 (.6) .016 (.4) .025 (.6) .025 (.6) .025 (.6) .025 (.6) 360 390 430 470 510 560 620 680 750 820 1000 1100 1200 1300 1500 1600 1800 2000 2200 2400 2700 3000 3300 3600 3900 4300 4700 5100 5600 6200 6800 7500 8200 9100 10000 11000 12000 13000 15000 16000 18000 22000 24000 27000 30000 33000 36000 39000 43000 47000 51000 CMR05F361JODR CMR05F391JODR CMR06F431JODR CMR06F471JODR CMR06F511JODR CMR06F561JODR CMR06F621JODR CMR06F681JODR CMR06F751JODR CMR06F821JODR CMR06F102JODR CMR06F112JODR CMR06F122JODR CMR06F132JODR CMR06F152JODR CMR06F162JODR CMR06F182JODR CMR06F202JODR CMR06F222JODR CMR06F242JODR CMR06F272JODR CMR06F302JODR CMR06F332JODR CMR06F362JODR CMR06F392JODR CMR06F432JODR CMR06F472JODR CMR07F512JODR CMR07F562JODR CMR07F622JODR CMR07F682JODR CMR07F752JODR CMR07F822JODR CMR07F912JODR CMR07F103JODR CMR07F113JODR CMR07F123JODR CMR07F133JODR CMR07F153JODR CMR07F163JODR CMR07F183JODR CMR08F223JODR CMR08F243JODR CMR08F273JODR CMR08F303JODR CMR08F333JODR CMR08F363JODR CMR08F393JODR CMR08F433JODR CMR08F473JODR CMR08F513JODR .470 (11.9) .470 (11.9) .640 (16.3) .640 (16.3) .650 (16.5) .650 (16.5) .650 (16.5) .650 (16.5) .650 (16.5) .650 (16.5) .650 (16.5) .650 (16.5) .660 (16.8) .660 (16.8) .660 (16.8) .660 (16.8) .670 (17.0) .670 (17.0) .670 (17.0) .670 (17.0) .680 (17.3) .680 (17.3) .680 (17.3) .680 (17.3) .690 (17.5) .690 (17.5) .700 (17.8) .780 (19.8) .780 (19.8) .780 (19.8) .780 (19.8) .790 (20.1) .790 (20.1) .790 (20.1) .800 (20.3) .800 (20.3) .800 (20.3) .810 (20.6) .810 (20.6) .820 (20.8) .820 (20.8) 1.42 (36.1) 1.43 (36.3) 1.43 (36.3) 1.44 (36.6) 1.44 (36.6) 1.45 (36.8) 1.45 (36.8) 1.46 (37.1) 1.47 (37.3) 1.48 (37.6) H in (mm) T in (mm) .400 (10.2) .220 (5.6) .400 (10.2) .220 (5.6) .510 (13.0) .200 (5.1) .510 (13.0) .200 (5.1) .510 (13.0) .200 (5.1) .510 (13.0) .200 (5.1) .510 (13.0) .200 (5.1) .510 (13.0) .210 (5.3) .510 (13.0) .210 (5.3) .510 (13.0) .210 (5.3) .520 (13.2) .220 (5.6) .520 (13.2) .220 (5.6) .520 (13.2) .220 (5.6) .520 (13.2) .220 (5.6) .520 (13.2) .230 (5.8) .530 (13.5) .230 (5.8) .530 (13.5) .240 (6.1) .530 (13.5) .240 (6.1) .530 (13.5) .250 ( 6.4) .540 (13.7) .260 ( 6.6) .540 (13.7) .270 ( 6.9) .550 (14.0) .280 ( 7.1) .550 (14.0) .290 ( 7.4) .560 (14.2) .300 ( 7.6) .560 (14.2) .310 ( 7.9) .570 (14.5) .330 ( 8.4) .580 (14.7) .350 ( 8.9) .860 (21.8) .280 ( 7.1) .870 (22.1) .290 ( 7.4) .870 (22.1) .290 ( 7.4) .870 (22.1) .300 ( 7.6) .880 (22.4) .310 ( 7.9) .880 (22.4) .320 ( 8.1) .880 (22.4) .330 ( 8.4) .890 (22.6) .340 ( 8.6) .890 (22.6) .350 ( 8.9) .890 (22.6) .360 ( 9.1) .890 (22.6) .370 ( 9.4) .900 (22.9) .390 ( 9.9) .900 (22.9) .410 (10.4) .910 (23.1) .430 (10.9) .880 (22.4) .310 (7.9) .880 (22.4) .320 (8.1) .880 (22.4) .330 (8.4) .890 (22.6) .350 (8.9) .890 (22.6) .360 (9.1) .900 (22.9) .380 (9.7) .900 (22.9) .400 (10.2) .910 (23.1) .420 (10.7) .910 (23.1) .450 (11.4) .920 (23.3) .470 (11.9) S in (mm) d in (mm) .225 (5.7) .225 (5.7) .350 (8.9) .350 (8.9) .350 (8.9) .350 (8.9) .350 (8.9) .350 (8.9) .350 (8.9) .350 (8.9) .350 (8.9) .350 (8.9) .350 (8.9) .350 (8.9) .350 (8.9) .350 (8.9) .350 (8.9) .350 (8.9) .350 ( 8.9) .350 ( 8.9) .350 ( 8.9) .350 ( 8.9) .350 ( 8.9) .350 ( 8.9) .350 ( 8.9) .350 ( 8.9) .350 ( 8.9) .425 (10.8) .425 (10.8) .425 (10.8) .425 (10.8) .425 (10.8) .425 (10.8) .425 (10.8) .425 (10.8) .425 (10.8) .425 (10.8) .425 (10.8) .425 (10.8) .425 (10.8) .425 (10.8) 1.05 (26.7) 1.05 (26.7) 1.05 (26.7) 1.05 (26.7) 1.05 (26.7) 1.05 (26.7) 1.05 (26.7) 1.05 (26.7) 1.05 (26.7) 1.05 (26.7) .025 (.6) .025 (.6) .032 (.8) .032 (.8) .032 (.8) .032 (.8) .032 (.8) .032 (.8) .032 (.8) .032 (.8) .032 (.8) .032 (.8) .032 (.8) .032 (.8) .032 (.8) .032 (.8) .032 (.8) .032 (.8) .032 ( .8) .032 ( .8) .032 ( .8) .032 ( .8) .032 ( .8) .032 ( .8) .032 ( .8) .032 ( .8) .032 ( .8) .040 (1.0) .040 (1.0) .040 (1.0) .040 (1.0) .040 (1.0) .040 (1.0) .040 (1.0) .040 (1.0) .040 (1.0) .040 (1.0) .040 (1.0) .040 (1.0) .040 (1.0) .040 (1.0) .040 (1.02) .040 (1.02) .040 (1.02) .040 (1.02) .040 (1.02) .040 (1.02) .040 (1.02) .040 (1.02) .040 (1.02) .040 (1.02) CDE Cornell Dubilier•1605 E. Rodney French Blvd.•New Bedford, MA 02744•Ph: (508)996-8564•Fax: (508)996-3830• www.cde.com Type CMR, High-Reliability, Mica Capacitors Specifications Capacitance is within tolerance when measured at these frequencies: 1 - 1000 pF @ 1 MHz > 1000 pF @ 1 Khz Dissipation Factor limits are below. Measure dissipation factor at 1 MHz when the capacitance is 1 pF to 1000 pF, and at 1 kHz when the capacitance is greater than 1000 pF. Dissipation factor is equal to DF = 2pfRC, where f is the test frequency, R is the equivalent series resistance, and C is the capacitance. For other capacitance values, see Figure 1. Capacitance Dissipation Factor 100-1000 pF 0.00075 max at 1 MHz 1100-3300 pF 0.0014 max at 1 kHz 3600-9100 pF 0.0013 max at 1 kHz 10,000 pF 0.0012 max at 1 kHz Quality Factor (Q) is the reciprocal of dissipation factor. Insulation Resistance for capacitances up to 10,000 pF is greater than 100 G. at 25 ºC, greater then 10 G. at 125 ºC, and greater than 5 G. at 150 ºC. For other capacitance values and temperatures, see Figure 2. Withstanding Voltage is two times the rated voltage, and can be applied up to 5 seconds without damage. Temperature Coefficient and Capacitance Drift measure the capacitors’ capacitance at 25 ºC, -55 ºC, 25 ºC, 125 ºC (or 150 ºC) and at 25 ºC after stabilizing at each temperature. The capaciance will meet the limits of the Characteristic table shown in Ordering Information. Failure Rate: Type CMR capacitors have specified failure rate levels ranging from 0.01% to 1.0% per 1000 hours. The failure rate level is established at 90% confidence level and is referred to operational life at full rated voltage at maximum rated temperature. High Voltage Stabilization: We subject capacitors with Failure Levels M, P, and R to a burn-in at twice rated voltage, at rated temperature, for a minimum of 48 hours. Capacitors that show damage, arcing, breakdown, or low IR are removed. We reject the lot if more then 8% of the capacitors fail. Solderability: After an 8-hour steam aging, coat leads with a rosin flux (R) and immerse in molten 245 ºC ±5 ºC 60/40 tin/lead solder. Solder coverage will be no less than 95% when examined at 10X magnification. Life Test: Subject the capacitors to maximum operating temperature (+125 ºC or +150 ºC) with 1.5 times rated voltage applied for 10,000 hours. Take readings and make visual observations every 2000 hours. There will be no visual damage and the capacitors will meet the after-test limits on the following page. Resistance to Solvents: Subject the capacitors to three cycles of 3 minute immersion in solvent, 10 strokes with bristle brush and, where applicable, ½ minute in vapor, per MIL-STD-202, Method 215. Repeat the three cycles for three solvent mixtures: Isolpropyl alchol mixture (Solvent 1), azeotrope mixture (Solvent 3), and water/propylene-glycol mixture (Solvent 4). The marking will not rub off or smear and there will be no visible damage to the capacitor body. Refer to MIL-STD-202 for details. Resistance to Soldering Heat: Capacitors will meet the requirements of MILSTD-202, Method 210 Test Condition G. Immerse capacitor leads to within .250 inches (6.4 mm) of the body in molten tin/lead solder (260 ºC ±5 ºC) for 10 ±2 seconds. Allow to cool. Capacitors will meet the after-test limits on the following page. Marking of capacitors conforms to method I of MIL-STD-1285, and includes the type designation, “JAN,” brand, trademark, source code, date code, rated voltage, capacitance, capacitance tolerance, and the highest rated temperature. Small capacitors are marked with the letter “J”. CDE Cornell Dubilier•1605 E. Rodney French Blvd.•New Bedford, MA 02744•Ph: (508)996-8564•Fax: (508)996-3830• www.cde.com Type CMR, High-Reliability, Mica Capacitors Moisture Resistance: Capacitors will meet the requirements of MIL-STD-202, Method 106F as outlined here and diagrammed on the right. Apply 100 V or the rated voltage (whichever is less) to half of the capacitors. Don’t apply voltage to the other half. Refer to MIL-STD202 for details. 1. Dry capacitors for 24 hours in a 50±2 °C oven and then allow to stabilize at room temperature. 2. Subject the capacitors to 20 24hour continuous cycles with relative humidity and temperature as shown. 3. 4 to 24 hours after completion of the last cycle the capacitors will show no visual damage and will meet the after-test limits below. After-Test Limits Test Withstand Insulation Capacitance Change DF Q Voltage Resistance (whichever is greater) Moisture Resistance IL 30 GΩ NV±1% or ±1 pF 150% IL 2/3xIL Life Test IL IL NV±1% or ±1 pF 150% IL 2/3xIL Solder Heat IL IL IV±5% or ±5pF IL=Initial Limit IL IL NV=Nominal Value IV=Initial Value Ordering Information Order by complete part number, as below. For other options, write your requirements on your quote request. Part Numbering System CMR05 C 100 J CDE Type P Capacitance Capacitance 1R0 = 1.0pF Tolerance 361 = 360pF D = ±.5 pf 122 = 1200pF F = ±1% G = ±2% Characteristic J = ±5% Temperature Range O = –55 °C to +125 °C P = –55 °C to +150 °C* Temp. Coeff. ppm/°C CapacitanceDrift Standard Cap. Range C –200 to +200 ±(0.5% +0.1pF) 1 – 18 pF E –20 to +100 ±(0.1% +0.1pF) 20 – 82 pF F 0 to + 70 ±(0.05% +0.1pF) 91 pF and up D R Voltage Y = 50 Vdc A = 100 Vdc C = 300 Vdc D = 500 Vdc Failure Rate M = 1.0%/1000 hrs. P = .1%/1000 hrs. R = .01%/1000 hrs. *P temperature range available for CMR04, CMR05, CMR06, CMR07, CMR08 CDE Cornell Dubilier•1605 E. Rodney French Blvd.•New Bedford, MA 02744•Ph: (508)996-8564•Fax: (508)996-3830• www.cde.com Type CMR, High-Reliability, Mica Capacitors Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and data (collectively, the “Information”) in this datasheet or other publication are subject to change. The customer is responsible for checking, confirming and verifying the extent to which the Information contained in this datasheet or other publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on the knowledge that the Cornell Dubilier company providing such statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representation regarding any such matter – and Cornell Dubilier specifically and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specific customer application, use, storage, transportation, or operating environment. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be required. CDE Cornell Dubilier•1605 E. Rodney French Blvd.•New Bedford, MA 02744•Ph: (508)996-8564•Fax: (508)996-3830• www.cde.com