DME4S39K-F

Type DME Polyester Film Capacitors Metallized Radial Leads DC Applications - Miniature Size Type DME radial-leaded, mini-dipped capacitors deliver virtually the same performance of other capacitors physically twice as big. Improvements in film technology permit the use of thinner dielectric. Type DME self heals shorts caused by overvoltage transients. For small size and low cost, Type DME is tops. NOTE: Refer to Application Guide for test conditions. Contact us for other capacitance values, sizes and performance specifications. Specifications Capacitance Range .01-10 µF Capacitance Tolerance ±10% (K) standard, ±5% (J) optional Rated Voltage 100-1000 Vdc Operating Temperature Range –55 ºC to +125 ºC (with 50% Vdc derating >85 ºC) Dielectric Strength 150% (1 minute) Dissipation Factor 1% Max. (25 °C, 1kHz) Insulation Resistance 3,000 MΩ x µF, 9,000 MΩ Min Life Test 1000 Hours at 85°C at 125% Rated Voltage Regulatory Information Ratings Cap. Catalog (µF) Part Number T Max. H Max. L Max. S ±.04 (±1.0) d dV/dt Inches (mm) Inches (mm) Inches (mm) Inches (mm) Inches (mm) V/μs 100 Vdc 0.56 DME1P56K-F 0.217 (5.5) 0.429 (10.9) 0.492 (12.5) 0.394 (10.0) 0.024 (0.6) 16 0.68 DME1P68K-F 0.236 (6.0) 0.469 (11.9) 0.492 (12.5) 0.394 (10.0) 0.024 (0.6) 16 0.82 DME1P82K-F 0.256 (6.5) 0.531 (13.5) 0.492 (12.5) 0.394 (10.0) 0.024 (0.6) 16 1.00 DME1W1K-F 0.276 (7.0) 0.551 (14.0) 0.492 (12.5) 0.394 (10.0) 0.024 (0.6) 16 1.20 DME1W1P2K-F 0.217 (5.5) 0.504 (12.8) 0.728 (18.5) 0.591 (15.0) 0.024 (0.6) 10 1.50 DME1W1P5K-F 0.256 (6.5) 0.528 (13.4) 0.728 (18.5) 0.591 (15.0) 0.032 (0.8) 10 1.80 DME1W1P8K-F 0.256 (6.5) 0.571 (14.5) 0.728 (18.5) 0.591 (15.0) 0.032 (0.8) 10 2.20 DME1W2P2K-F 0.295 (7.5) 0.610 (15.5) 0.728 (18.5) 0.591 (15.0) 0.032 (0.8) 10 2.70 DME1W2P7K-F 0.315 (8.0) 0.630 (16.0) 0.728 (18.5) 0.591 (15.0) 0.032 (0.8) 10 3.30 DME1W3P3K-F 0.354 (9.0) 0.650 (16.5) 0.728 (18.5) 0.591 (15.0) 0.032 (0.8) 10 3.90 DME1W3P9K-F 0.276 (7.0) 0.646 (16.4) 1.024 (26.0) 0.886 (22.5) 0.032 (0.8) 6 4.70 DME1W4P7K-F 0.315 (8.0) 0.669 (17.0) 1.024 (26.0) 0.886 (22.5) 0.032 (0.8) 6 5.60 DME1W5P6K-F 0.354 (9.0) 0.689 (17.5) 1.024 (26.0) 0.886 (22.5) 0.032 (0.8) 6 6.80 DME1W6P8K-F 0.374 (9.5) 0.728 (18.5) 1.024 (26.0) 0.886 (22.5) 0.032 (0.8) 6 8.20 DME1W8P2K-F 0.394 (10.0) 0.787 (20.0) 1.024 (26.0) 0.886 (22.5) 0.032 (0.8) 6 10.00 DME1W10K-F 0.453 (11.5) 0.827 (21.0) 1.024 (26.0) 0.886 (22.5) 0.032 (0.8) 6 CDE Cornell Dubilier•1605 E. Rodney French Blvd.•New Bedford, MA 02740•Phone: (508)996-8561•Fax: (508)996-3830 www.cde.com Type DME Polyester Film Capacitors Cap. Catalog (µF) Part Number T Max. H Max. L Max. S ±.04 (±1.0) d dV/dt Inches (mm) Inches (mm) Inches (mm) Inches (mm) Inches (mm) V/μs 250 Vdc 0.010 DME2S1K-F 0.177 (4.5) 0.295 (7.5) 0.406 (10.3) 0.295 (7.5) 0.024 (0.6) 31 0.012 DME2S12K-F 0.177 (4.5) 0.295 (7.5) 0.406 (10.3) 0.295 (7.5) 0.024 (0.6) 31 0.015 DME2S15K-F 0.177 (4.5) 0.295 (7.5) 0.406 (10.3) 0.295 (7.5) 0.024 (0.6) 31 0.018 DME2S18K-F 0.177 (4.5) 0.295 (7.5) 0.406 (10.3) 0.295 (7.5) 0.024 (0.6) 31 0.022 DME2S22K-F 0.177 (4.5) 0.295 (7.5) 0.406 (10.3) 0.295 (7.5) 0.024 (0.6) 31 0.027 DME2S27K-F 0.177 (4.5) 0.295 (7.5) 0.406 (10.3) 0.295 (7.5) 0.024 (0.6) 31 0.033 DME2S33K-F 0.177 (4.5) 0.295 (7.5) 0.406 (10.3) 0.295 (7.5) 0.024 (0.6) 31 0.039 DME2S39K-F 0.177 (4.5) 0.295 (7.5) 0.406 (10.3) 0.295 (7.5) 0.024 (0.6) 31 0.047 DME2S47K-F 0.177 (4.5) 0.295 (7.5) 0.406 (10.3) 0.295 (7.5) 0.024 (0.6) 31 0.056 DME2S56K-F 0.189 (4.8) 0.311 (7.9) 0.406 (10.3) 0.295 (7.5) 0.024 (0.6) 31 0.068 DME2S68K-F 0.189 (4.8) 0.311 (7.9) 0.406 (10.3) 0.295 (7.5) 0.024 (0.6) 31 0.082 DME2S82K-F 0.197 (5.0) 0.315 (8.0) 0.406 (10.3) 0.295 (7.5) 0.024 (0.6) 31 0.100 DME2P1K-F 0.228 (5.8) 0.346 (8.8) 0.406 (10.3) 0.295 (7.5) 0.024 (0.6) 31 0.120 DME2P12K-F 0.236 (6.0) 0.354 (9.0) 0.406 (10.3) 0.295 (7.5) 0.024 (0.6) 31 0.150 DME2P15K-F 0.236 (6.0) 0.425 (10.8) 0.406 (10.3) 0.295 (7.5) 0.024 (0.6) 31 0.180 DME2P18K-F 0.197 (5.0) 0.413 (10.5) 0.492 (12.5) 0.394 (10.0) 0.024 (0.6) 20 0.220 DME2P22K-F 0.236 (6.0) 0.413 (10.5) 0.492 (12.5) 0.394 (10.0) 0.024 (0.6) 20 0.270 DME2P27K-F 0.236 (6.0) 0.453 (11.5) 0.492 (12.5) 0.394 (10.0) 0.024 (0.6) 20 0.330 DME2P33K-F 0.276 (7.0) 0.472 (12.0) 0.492 (12.5) 0.394 (10.0) 0.024 (0.6) 20 0.390 DME2P39K-F 0.193 (4.9) 0.472 (12.0) 0.728 (18.5) 0.591 (15.0) 0.024 (0.6) 12 0.470 DME2P47K-F 0.236 (6.0) 0.492 (12.5) 0.728 (18.5) 0.591 (15.0) 0.024 (0.6) 12 0.560 DME2P56K-F 0.236 (6.0) 0.512 (13.0) 0.728 (18.5) 0.591 (15.0) 0.024 (0.6) 12 0.680 DME2P68K-F 0.256 (6.5) 0.531 (13.5) 0.728 (18.5) 0.591 (15.0) 0.032 (0.8) 12 0.820 DME2P82K-F 0.276 (7.0) 0.590 (15.0) 0.728 (18.5) 0.591 (15.0) 0.032 (0.8) 12 1.000 DME2W1K-F 0.315 (8.0) 0.610 (15.5) 0.728 (18.5) 0.591 (15.0) 0.032 (0.8) 12 1.200 DME2W1P2K-F 0.315 (8.0) 0.626 (15.9) 0.728 (18.5) 0.591 (15.0) 0.032 (0.8) 12 1.500 DME2W1P5K-F 0.374 (9.5) 0.689 (17.5) 0.728 (18.5) 0.591 (15.0) 0.032 (0.8) 12 1.800 DME2W1P8K-F 0.295 (7.5) 0.610 (15.5) 1.024 (26.0) 0.886 (22.5) 0.032 (0.8) 7 2.200 DME2W2P2K-F 0.354 (9.0) 0.669 (17.0) 1.024 (26.0) 0.886 (22.5) 0.032 (0.8) 7 2.700 DME2W2P7K-F 0.394 (10.0) 0.689 (17.5) 1.024 (26.0) 0.886 (22.5) 0.032 (0.8) 7 3.300 DME2W3P3K-F 0.413 (10.5) 0.748 (19.0) 1.024 (26.0) 0.886 (22.5) 0.032 (0.8) 7 3.900 DME2W3P9K-F 0.443 (11.2) 0.807 (20.5) 1.024 (26.0) 0.886 (22.5) 0.032 (0.8) 7 4.700 DME2W4P7K-F 0.492 (12.5) 0.886 (22.5) 1.024 (26.0) 0.886 (22.5) 0.032 (0.8) 7 5.600 DME2W5P6K-F 0.492 (12.5) 0.846 (21.5) 1.220 (31.0) 1.083 (27.5) 0.032 (0.8) 6 6.800 DME2W6P8K-F 0.531 (13.5) 0.886 (22.5) 1.220 (31.0) 1.083 (27.5) 0.032 (0.8) 6 8.200 DME2W8P2K-F 0.590 (15.0) 0.945 (24.0) 1.220 (31.0) 1.083 (27.5) 0.032 (0.8) 6 10.000 DME2W10K-F 0.630 (16.0) 1.024 (26.0) 1.220 (31.0) 1.083 (27.5) 0.032 (0.8) 6 0.010 DME4S1K-F 0.169 (4.3) 0.291 (7.4) 0.406 (10.3) 0.295 (7.5) 0.024 (0.6) 46 0.012 DME4S12K-F 0.173 (4.4) 0.295 (7.5) 0.406 (10.3) 0.295 (7.5) 0.024 (0.6) 46 0.015 DME4S15K-F 0.173 (4.4) 0.295 (7.5) 0.406 (10.3) 0.295 (7.5) 0.024 (0.6) 46 0.018 DME4S18K-F 0.173 (4.4) 0.295 (7.5) 0.406 (10.3) 0.295 (7.5) 0.024 (0.6) 46 0.022 DME4S22K-F 0.189 (4.8) 0.311 (7.9) 0.406 (10.3) 0.295 (7.5) 0.024 (0.6) 46 0.027 DME4S27K-F 0.217 (5.5) 0.315 (8.0) 0.406 (10.3) 0.295 (7.5) 0.024 (0.6) 46 0.033 DME4S33K-F 0.236 (6.0) 0.354 (9.0) 0.406 (10.3) 0.295 (7.5) 0.024 (0.6) 46 0.039 DME4S39K-F 0.193 (4.9) 0.315 (8.0) 0.492 (12.5) 0.394 (10.0) 0.024 (0.6) 30 0.047 DME4S47K-F 0.217 (5.5) 0.335 (8.5) 0.492 (12.5) 0.394 (10.0) 0.024 (0.6) 30 0.056 DME4S56K-F 0.217 (5.5) 0.394 (10.0) 0.492 (12.5) 0.394 (10.0) 0.024 (0.6) 30 400 Vdc CDE Cornell Dubilier•1605 E. Rodney French Blvd.•New Bedford, MA 02740•Phone: (508)996-8561•Fax: (508)996-3830 www.cde.com Type DME Polyester Film Capacitors Cap. Catalog (µF) Part Number T Max. H Max. L Max. S ±.04 (±1.0) d dV/dt Inches (mm) Inches (mm) Inches (mm) Inches (mm) Inches (mm) V/μs 400 Vdc 0.068 DME4S68K-F 0.236 (6.0) 0.413 (10.5) 0.492 (12.5) 0.394 (10.0) 0.024 (0.6) 30 0.082 DME4S82K-F 0.248 (6.3) 0.433 (11.0) 0.492 (12.5) 0.394 (10.0) 0.024 (0.6) 30 0.100 DME4P1K-F 0.256 (6.5) 0.472 (12.0) 0.492 (12.5) 0.394 (10.0) 0.024 (0.6) 30 0.120 DME4P12K-F 0.217 (5.5) 0.394 (10.0) 0.728 (18.5) 0.591 (15.0) 0.024 (0.6) 17 0.150 DME4P15K-F 0.217 (5.5) 0.488 (12.4) 0.728 (18.5) 0.591 (15.0) 0.024 (0.6) 17 0.180 DME4P18K-F 0.217 (5.5) 0.492 (12.5) 0.728 (18.5) 0.591 (15.0) 0.024 (0.6) 17 0.220 DME4P22K-F 0.256 (6.5) 0.512 (13.0) 0.728 (18.5) 0.591 (15.0) 0.024 (0.6) 17 0.270 DME4P27K-F 0.256 (6.5) 0.563 (14.3) 0.728 (18.5) 0.591 (15.0) 0.032 (0.8) 17 0.330 DME4P33K-F 0.295 (7.5) 0.587 (14.9) 0.728 (18.5) 0.591 (15.0) 0.032 (0.8) 17 0.390 DME4P39K-F 0.295 (7.5) 0.606 (15.4) 0.728 (18.5) 0.591 (15.0) 0.032 (0.8) 17 0.470 DME4P47K-F 0.327 (8.3) 0.669 (17.0) 0.728 (18.5) 0.591 (15.0) 0.032 (0.8) 17 0.560 DME4P56K-F 0.276 (7.0) 0.630 (16.0) 1.024 (26.0) 0.886 (22.5) 0.032 (0.8) 11 0.680 DME4P68K-F 0.295 (7.5) 0.650 (16.5) 1.024 (26.0) 0.886 (22.5) 0.032 (0.8) 11 0.820 DME4P82K-F 0.315 (8.0) 0.689 (17.5) 1.024 (26.0) 0.886 (22.5) 0.032 (0.8) 11 1.000 DME4W1K-F 0.335 (8.5) 0.728 (18.5) 1.024 (26.0) 0.886 (22.5) 0.032 (0.8) 11 1.200 DME4W1P2K-F 0.374 (9.5) 0.744 (18.9) 1.024 (26.0) 0.886 (22.5) 0.032 (0.8) 11 1.500 DME4W1P5K-F 0.374 (9.5) 0.748 (19.0) 1.220 (31.0) 1.083 (27.5) 0.032 (0.8) 9 1.800 DME4W1P8K-F 0.433 (11.0) 0.807 (20.5) 1.220 (31.0) 1.083 (27.5) 0.032 (0.8) 9 2.200 DME4W2P2K-F 0.453 (11.5) 0.866 (22.0) 1.220 (31.0) 1.083 (27.5) 0.032 (0.8) 9 0.010 DME6S1K-F 0.197 (5.0) 0.315 (8.0) 0.492 (12.5) 0.394 (10.0) 0.024 (0.6) 66 0.012 DME6S12K-F 0.197 (5.0) 0.315 (8.0) 0.492 (12.5) 0.394 (10.0) 0.024 (0.6) 66 0.015 DME6S15K-F 0.217 (5.5) 0.335 (8.5) 0.492 (12.5) 0.394 (10.0) 0.024 (0.6) 66 0.018 DME6S18K-F 0.217 (5.5) 0.394 (10.0) 0.492 (12.5) 0.394 (10.0) 0.024 (0.6) 66 0.022 DME6S22K-F 0.217 (5.5) 0.413 (10.5) 0.492 (12.5) 0.394 (10.0) 0.024 (0.6) 66 0.027 DME6S27K-F 0.217 (5.5) 0.429 (10.9) 0.492 (12.5) 0.394 (10.0) 0.024 (0.6) 66 0.033 DME6S33K-F 0.256 (6.5) 0.469 (11.9) 0.492 (12.5) 0.394 (10.0) 0.024 (0.6) 66 0.039 DME6S39K-F 0.236 (6.0) 0.528 (13.4) 0.492 (12.5) 0.394 (10.0) 0.024 (0.6) 66 0.047 DME6S47K-F 0.276 (7.0) 0.531 (13.5) 0.492 (12.5) 0.394 (10.0) 0.024 (0.6) 66 0.056 DME6S56K-F 0.236 (6.0) 0.413 (10.5) 0.728 (18.5) 0.591 (15.0) 0.024 (0.6) 33 0.068 DME6S68K-F 0.236 (6.0) 0.453 (11.5) 0.728 (18.5) 0.591 (15.0) 0.024 (0.6) 33 0.082 DME6S82K-F 0.276 (7.0) 0.472 (12.0) 0.728 (18.5) 0.591 (15.0) 0.024 (0.6) 33 0.100 DME6P1K-F 0.256 (6.5) 0.551 (14.0) 0.728 (18.5) 0.591 (15.0) 0.024 (0.6) 33 0.120 DME6P12K-F 0.256 (6.5) 0.571 (14.5) 0.728 (18.5) 0.591 (15.0) 0.032 (0.8) 33 0.150 DME6P15K-F 0.315 (8.0) 0.630 (16.0) 0.728 (18.5) 0.591 (15.0) 0.032 (0.8) 33 0.180 DME6P18K-F 0.315 (8.0) 0.630 (16.0) 0.728 (18.5) 0.591 (15.0) 0.032 (0.8) 33 0.220 DME6P22K-F 0.374 (9.5) 0.669 (17.0) 0.728 (18.5) 0.591 (15.0) 0.032 (0.8) 33 0.270 DME6P27K-F 0.276 (7.0) 0.650 (16.5) 1.024 (26.0) 0.886 (22.5) 0.032 (0.8) 19 0.330 DME6P33K-F 0.315 (8.0) 0.689 (17.5) 1.024 (26.0) 0.886 (22.5) 0.032 (0.8) 19 0.390 DME6P39K-F 0.335 (8.5) 0.705 (17.9) 1.024 (26.0) 0.886 (22.5) 0.032 (0.8) 19 0.470 DME6P47K-F 0.394 (10.0) 0.728 (18.5) 1.024 (26.0) 0.886 (22.5) 0.032 (0.8) 19 0.560 DME6P56K-F 0.413 (10.5) 0.787 (20.0) 1.024 (26.0) 0.886 (22.5) 0.032 (0.8) 19 0.680 DME6P68K-F 0.472 (12.0) 0.827 (21.0) 1.024 (26.0) 0.886 (22.5) 0.032 (0.8) 19 0.820 DME6P82K-F 0.453 (11.5) 0.807 (20.5) 1.220 (31.0) 1.083 (27.5) 0.032 (0.8) 15 1.000 DME6W1K-F 0.512 (13.0) 0.866 (22.0) 1.220 (31.0) 1.083 (27.5) 0.032 (0.8) 15 1.200 DME6W1P2K-F 0.531 (13.5) 0.906 (23.0) 1.220 (31.0) 1.083 (27.5) 0.032 (0.8) 15 1.500 DME6W1P5K-F 0.630 (16.0) 0.985 (25.0) 1.220 (31.0) 1.083 (27.5) 0.032 (0.8) 15 1.800 DME6W1P8K-F 0.669 (17.0) 1.063 (27.0) 1.220 (31.0) 1.083 (27.5) 0.032 (0.8) 15 630 Vdc CDE Cornell Dubilier•1605 E. Rodney French Blvd.•New Bedford, MA 02740•Phone: (508)996-8561•Fax: (508)996-3830 www.cde.com Type DME Polyester Film Capacitors Cap. Catalog (µF) Part Number T Max. Inches 2.200 DME6W2P2K-F 0.787 H Max. (mm) Inches (20.0) 1.142 (mm) (29.0) L Max. S ±.04 (±1.0) d dV/dt Inches (mm) Inches (mm) Inches (mm) V/μs 1.220 (31.0) 1.083 (27.5) 0.032 (0.8) 15 1000 Vdc 0.010 DME10S1K-F 0.236 (6.0) 0.433 (11.0) 0.610 (15.5) 0.492 (12.5) 0.024 (0.6) 93 0.012 DME10S12K-F 0.236 (6.0) 0.472 (12.0) 0.610 (15.5) 0.492 (12.5) 0.024 (0.6) 93 0.015 DME10S15K-F 0.276 (7.0) 0.492 (12.5) 0.610 (15.5) 0.492 (12.5) 0.024 (0.6) 93 0.018 DME10S18K-F 0.295 (7.5) 0.512 (13.0) 0.610 (15.5) 0.492 (12.5) 0.032 (0.8) 93 0.022 DME10S22K-F 0.295 (7.5) 0.610 (15.5) 0.610 (15.5) 0.492 (12.5) 0.032 (0.8) 93 0.027 DME10S27K-F 0.236 (6.0) 0.512 (13.0) 0.827 (21.0) 0.689 (17.5) 0.032 (0.8) 104 0.033 DME10S33K-F 0.256 (6.5) 0.551 (14.0) 0.827 (21.0) 0.689 (17.5) 0.032 (0.8) 104 0.039 DME10S39K-F 0.276 (7.0) 0.571 (14.5) 0.827 (21.0) 0.689 (17.5) 0.032 (0.8) 104 0.047 DME10S47K-F 0.295 (7.5) 0.610 (15.5) 0.827 (21.0) 0.689 (17.5) 0.032 (0.8) 104 0.056 DME10S56K-F 0.295 (7.5) 0.669 (17.0) 0.827 (21.0) 0.689 (17.5) 0.032 (0.8) 104 0.068 DME10S68K-F 0.335 (8.5) 0.709 (18.0) 0.827 (21.0) 0.689 (17.5) 0.032 (0.8) 104 0.082 DME10S82K-F 0.354 (9.0) 0.728 (18.5) 0.827 (21.0) 0.689 (17.5) 0.032 (0.8) 104 0.100 DME10P1K-F 0.394 (10.0) 0.787 (20.0) 0.827 (21.0) 0.689 (17.5) 0.032 (0.8) 104 0.120 DME10P12K-F 0.354 (9.0) 0.728 (18.5) 1.024 (26.0) 0.886 (22.5) 0.032 (0.8) 70 0.150 DME10P15K-F 0.394 (10.0) 0.787 (20.0) 1.024 (26.0) 0.886 (22.5) 0.032 (0.8) 70 0.180 DME10P18K-F 0.413 (10.5) 0.866 (22.0) 1.024 (26.0) 0.886 (22.5) 0.032 (0.8) 70 0.220 DME10P22K-F 0.472 (12.0) 0.906 (23.0) 1.024 (26.0) 0.886 (22.5) 0.032 (0.8) 70 Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and data (collectively, the “Information”) in this datasheet or other publication are subject to change. The customer is responsible for checking, confirming and verifying the extent to which the Information contained in this datasheet or other publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on the knowledge that the Cornell Dubilier company providing such statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representation regarding any such matter – and Cornell Dubilier specifically and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specific customer application, use, storage, transportation, or operating environment. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be required. CDE Cornell Dubilier•1605 E. Rodney French Blvd.•New Bedford, MA 02740•Phone: (508)996-8561•Fax: (508)996-3830 www.cde.com