FCA1206C224M

Type FCA Acrylic Surface Mount Film Capacitors Acrylic Stacked Metallized Film Capacitors for Filtering and Noise Attenuation Type FCA acrylic film chips are non-inductive stacked metallized film capacitors which feature large capacitance values in standard surface mount case sizes. Highlights • • • • • Smallest film chips No piezoelectric effect Non-polarized, non-magnetic Low ESR 1.0 µF/10V in 1206 case Filtering • Decoupling • Noise Attenuation • Distortion Free Audio Type FCA acrylic film capacitors offer high capacitance values in standard surface mount case sizes. They excel in attenuating DC power bus noise, and as ripple filters in dc to dc power conversion circuits. As coupling capacitors in audio circuits, they yield distortion free sound and better high frequency filtering. The 1.0 µF 10 Vdc rating offers a film capacitor that is a direct replacement for tantalum “A” case capacitors. The nonpolar FCA capacitor has lower ESR and lower DCL than an equivalent tantalum capacitor, and in high frequency applications it takes a tantalum capacitor with ten times the capacitance to perform as well as the FCA capacitor. The capacitor is constructed of noninductive stacked layers of metallized acrylic resin film with lead free solder (Sn/Ag/Cu) plated copper alloy terminals. Specifications Capacitance Range 0.10 µF to 1.0 µF Capacitance Tolerance ±20% @ 1 kHz and +20 ºC Rated Voltage 16 Vdc [1.0 µF in 1206 case, 10 Vdc] Operating Temperature Range –40 ºC to +85 ºC AC Voltage Rating 12 Vrms Dissipation Factor 0.015 @ 1 kHz and +20 ºC Dielectric Strength 175% of rated voltage for 5 seconds Moisture Resistance After 500 hours with rated voltage applied at +40 ºC and 90 to 95% RH, the capacitor will meet the following limits: ∆C = +20/–3% of the initial measured value DF ≤2.25% (at 1 kHz) IR > 100MΩ (C ≤0.33 µF) IR > 30MΩ•µF(C > 0.33 µF) Dielectric Strength: Capacitor will withstand 130% of the rated voltage for 1 minute. Life Test Apply 125% of the rated DC working voltage at 85 ºC for 1000 hours, and then stabilize them to +20 ºC. Capacitors will meet the following limits: C = +7%/–20% of the initial measured value DF ≤1.65% (at 1 kHz) IR > 300MΩ (C ≤0.33 µF) IR > 100MΩ•µF(C > 0.33 µF) Insulation Resistance (IR) After 1 minute @10 Vdc; +20 ºC IR >1000 MΩ (C ≤0.33 µF) IR > 300 MΩ•µF (C >0.33 µF) Resistance to Soldering The capacitor can withstand being heated in an oven at 235 ºC for 200 sec. RoHS Compliant Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com Type FCA Acrylic Surface Mount Film Capacitors Ratings For packaging codes/dimensions please click here for Application Guide Maximum Current Catalog Part Capacitance Number (µF) dv/dt 10kHz 20kHz 50kHz 100kHz 200kHz 500kHz 1MHz (V/µs) (Arms) (Arms) (Arms) (Arms) (Arms) (Arms) (Arms) 1.05 1.220 1.35 1.43 1.43 10 Vdc 1.00 FCA1206A105M-H3 3 0.60 0.76 16 Vdc .10 FCA0805C104M-J2 19 0.15 0.21 0.3 0.375 0.46 0.58 0.65 .15 FCA1206C154M-H1 15 0.21 0.28 0.37 0.450 0.54 0.62 0.68 .22 FCA1206C224M-H1 13 0.25 0.33 0.45 0.550 0.66 0.76 0.84 .33 FCA1206C334M-H2 10 0.35 0.45 0.61 0.740 0.84 0.94 1.00 .47 FCA1206C474M-H3 7 0.39 0.52 0.71 0.860 1.00 1.10 1.17 .68 FCA1206C684M-H3 5 0.48 0.625 0.85 1.040 1.19 1.31 1.34 1.00 FCA1210C105M-G2 3 0.60 0.78 1.05 1.250 1.38 1.46 1.46 H S Outline Drawing Outline Dimensions Part Number Case Suffix Code Inches L W Millmeters H S L W (±.008in.) (±.008in.) (±.008in.) (±.012in.) (±0.2mm) (±0.2mm) (±0.2mm) (±0.3mm) J2 0805 0.079 0.049 0.039 0.018 2.0 1.25 1.0 0.45 H1 1206 0.126 0.063 0.032 0.026 3.2 1.60 0.8 0.65 H2 1206 0.126 0.063 0.039 0.026 3.2 1.60 1.0 0.65 H3 1206 0.126 0.063 0.055 0.026 3.2 1.60 1.4 0.65 G2 1210 0.126 0.098 0.055 0.026 3.2 2.50 1.4 0.65 Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com Type FCA Acrylic Surface Mount Film Capacitors Temperature Characteristics Frequency Characteristics Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com Type FCA Acrylic Surface Mount Film Capacitors Typical Applications Coupling Capacitor for Audio: Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com Type FCA Acrylic Surface Mount Film Capacitors Typical Applications Filtering Performance: Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and data (collectively, the “Information”) in this datasheet or other publication are subject to change. The customer is responsible for checking, confirming and verifying the extent to which the Information contained in this datasheet or other publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on the knowledge that the Cornell Dubilier company providing such statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representation regarding any such matter – and Cornell Dubilier specifically and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specific customer application, use, storage, transportation, or operating environment. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be required. Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Cornell Dubilier: FCA1206C154M-H1 FCA1206C334M-H2 FCA1206C474M-H3 FCA1206C684M-H3 FCA1210C105M-G2 FCA1206A105M-H3 FCA1206C224M-H1 FCA1210C105M FCA1206C474M FCA1206C224M