MCH38FM560J-Y

Types MCH and MCHN Multilayer High RF Power Capacitors 2500 & 4000 Volt RF Capacitors for Medical Imaging Coils, Plasma Generators, VHF/UHF Power Amplifiers and Antenna Tuning with Nonmagnetic Option The flexible aluminum silicate dielectric eliminates cracking and permits soldering to 260 °C. These high voltage, RF capacitors need no voltage derating at temperatures up to 125 ºC and voltages to 4000 Vdc. Exceptionally low ESR and superior thermal qualities set the MCH/MCHN chip capacitors apart from ordinary RF capacitors. � �������������������������������������� Wave Solder Profile Soldering Pre-heat 220 ~255 ºC Peak 230 ~255 ºC Highlights • • • • • • • • • ����������������� Specifications No thermal cracking FR4 compatible and wave solderable Extremely high Q above 50 MHz 300 250 Nonmagnetic option available 200 Ultra stable: no change with (t), (V) and (f) 150 Excellent for tuning and impedance matching 100 High flashover level 50 Withstands 2 mm bend test 25 0 Better than porcelain Temp (ºC) Applications Soldering Peak 230~260 ºC Reflow Solder Profile • MRI Coils Pre-heat 220 ~260 ºC 30 50 • • • • • • • 150 RF Ablation Systems Cooling 300 Transmitters 250 RF Generators 200 10 sec. max. Antenna Tuning 150 Lasers 100 RF Power Amplifiers MRI Generators 50 Temp (ºC) 180 200 25 0 C 5 sec. max. Time (sec) Capacitance and Voltage Ratings: RoHS Compliant Time (sec) 10 20 70 80 10 – 220 pF at 4kVdc and 270 – 1000 pF at Solder 2500 Vdc (other ratings available) Capacitance Tolerance: ±5% standard (±2% available) Hand Soldering Method Capacitor Temperature Range: –55 ºC to +125 ºC (with no voltage derating) • SnAgCu recommended solder 3838 (9.7 x 9.7 mm) •Case Size: Do not use strong acid type flux with RM or RMA Solder • Soldering iron tip temperature should be Temperature Characteristics: ºC ≤Temp. Coefficient Cap Drift 250 ºC to 280 5 sec. • 60 Watt iron or less 0 Tip of i to +50 ppm/ºC ±(0.05%+0.1 pF) Good Bad Engineering Design Kits ������������������������������������������������������ Resin Coating Glass Terminal MCH2500VKIT8, MCH4000VKIT10 Nonmagnetic MCHN2500VKIT9, MCHN4000VKIT11 High Q, Low ESR Multilayer Construction for RF Power Applications Mica 2500 V kits 5 each of 8 values 270 to 1000 pF 4000 V kits 5 each of 10 values 10 – 220 pF Sn Plating Conductive Resin Ni Electrode: Type MC Cu Electrode: Nonmagnetic Type MCN Ag Electrode ��������������������������������������������������������������������������������������������������������������������������� CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com � 1 Types MCH and MCHN Multilayer High RF Power Capacitors Outline Drawing Marking on Top .405” max (10.3 mm) max L T max see chart Soldering Pattern ← .425” (10.8 mm) min. → ↑ .405” (10.3 mm) min .. (10 395” .1 mm max )m ax W ←←←← Side Terminal: (Ni Sn plating) MCH (Cu Sn plating) MCHN ↓ .050” .050” → ←1.3 mm) ←(8.3.325” → ←1.3 mm) → ( mm) ( min min min Part Numbering System MCH Type MCH = Standard MCHN = Nonmagnetic (0.4 to 1.5 mm) 38 0.016” to 0.060” F Temperature Coefficient F=0 to +50 ppm/ºC K Voltage K = 2500 Vdc M=4000 Vdc 271 J –Y Package Blank = Bulk (100 per bag) –Y = Tray pack (100 per tray) Case Code 38 = .380x.380 Capacitance Tolerance 100 = 10 pF 271 = 270 pF J = ±5% G = ±2% Ratings (additional ratings available) Cap (pF) 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 Catalog Part Number* MCH38FM100D-Y MCH38FM120J-Y MCH38FM150J-Y MCH38FM180J-Y MCH38FM220J-Y MCH38FM270J-Y MCH38FM330J-Y MCH38FM390J-Y MCH38FM470J-Y MCH38FM560J-Y MCH38FM680J-Y MCH38FM820J-Y MCH38FM101J-Y MCH38FM121J-Y MCH38FM151J-Y MCH38FM181J-Y MCH38FM221J-Y MCH38FK271J-Y MCH38FK331J-Y MCH38FK391J-Y MCH38FK471J-Y MCH38FK561J-Y MCH38FK681J-Y MCH38FK821J-Y MCH38FK102J-Y 2500 Vdc 0.380 4000 Vdc Voltage (Vdc) 102 = 1000 pF D = ± 0.5 pF RoHS Compliant Length Width T max Inches (mm) Inches (mm) Inches (mm) 0.080 (2.03 mm) 0.120 (3.05 mm) 0.380 +0.015 / -0 (9.65 mm +0.38 / -0) 0.160 (4.06 mm) +0.025 / -0 (9.65 mm +0.64 /- 0) 0.240 (6.10 mm) 0.160 (4.06 mm) 0.240 (6.10 mm) 0.270 (6.86 mm) *For nonmagnetic version change P/N prefix to MCHN CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com 2 Types MCH and MCHN Multilayer High RF Power Capacitors Typical Performance Data ESR vs. Frequency for 470 pF 1 Porcelain (3838) MCH (3838) 0.1 ESR (�) 0.01 0.001 1 10 100 f (MHz) 1000 10000 MCH (3838) 2.5 kVdc Porcelain (3838) 2.5 kVdc Current Rating (IRMS) for 470 pF at 60 ºC Rise 100 RMS Current (Amps) MCH (3838) 10 Porcelain (3838) 1 1 10 100 f (MHz) 1000 10000 Porcelain (3838) 2.5 kV 11.4 A @ 64 MHz MCH38K471J (3838) 2.5 kV 14.2 A @ 64 MHz CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com 3 Types MCH and MCHN Multilayer High RF Power Capacitors Typical Performance Data Q vs. Frequency 470 pF @ 25 ºC 100000 10000 1000 Q 100 Q Porcelain (3838) MCH (3838) 10 1 1 10 100 1000 10000 f (MHz) Porcelain (3838) 2.5 kV 11.4 A @ 64 MHz MCH38K471J (3838) 2.5 kV 14.2 A @ 64 MHz Impedance vs. Frequency for 470 pF @ 25 ºC Impedance |Z| vs. Frequency for 470 pF @ 25 ºC 1000 100 |Z| (� ) Z (Ω) Porcelain (3838) 10 MCH (3838) 1 0.1 1 10 100 1000 10000 f (MHz) Porcelain (3838) 2.5 kV 11.4 A @ 64 MHz MCH38K471J (3838) 2.5 kV 14.2 A @ 64 MHz CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com 4 Types MCH and MCHN Multilayer High RF Power Capacitors Typical Performance Data Environmental Specifications Humidity (No Load): +40 ºC ±2 ºC @ 90% Electrical Specifications Dielectric Strength: 2500 Vdc: to 95% RH, 500 hrs. 1.5 x Rated Voltage Measure after 24 hrs, cap for 5 seconds is ±3% of initial, DF ≤150% 4000 Vdc: of original, IR 3x104 MΩ, 1.2 x Rated Voltage no visual damage for 5 seconds Storage Method: Store at 0 to +40 ºC at Dissipation Factor (DF): ≤0.1% @ 1 MHz and ≤5 Vrms ≤60% RH, use within Insulation Resistance: 100K MΩ minimum 6 months of receipt, if @ 500 Vdc ±10% 6 months is exceeded, check solderability CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com 5 Types MCH and MCHN Multilayer High RF Power Capacitors Mechanical Specifications Bending Test: Mount the capacitor as shown at right and press the ram bar until a 2.0 mm deflection is achieved. There will be no visual damage and the capacitors will meet the limits of methods JIS 5102 8.11 and AEC-Q200-005 without cracking or visual damage. Soldering Specifications Reflow Solder Profile 300 260 200 150 100 50 25 0 30 50 150 180 200 10 sec. max. Pre-heat 220 ~260 ºC Soldering Peak 230~260 ºC Cooling 300 260 Wave Solder Profile SolderPre-heat Cooling Peak 230 ~255 ºC 220 ~255 ºC Temp (ºC) 200 150 100 50 25 0 10 20 70 80 90 5 sec. max. Time (sec) Time (sec) Hand Soldering Method • • • • • SnPb or SnAgCu recommended solder Do not use strong acid type flux with RM or RMS Soldering iron tip temperature should be 280 ºC to 350 ºC ≤ 5 sec. 80 Watt iron or less Iron tip should not touch chip terminals Solder Tip of iron Capacitor Solder Good 6 Bad CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com 10-10-2007