SPA101M04B

Type SPA Solid Polymer Aluminum SMT Capacitors • Ultra-Low ESR – 5 mΩ to 9 mΩ @ 100 kHz • High Ripple current – up to 4.0 Arms at 100 kHz • Long Life – No dry out failure related mechanism • Stable Impedance and ESR vs. Temperature • Great for bulk storage and ripple filtering • Ignition free E Applications LE T Motherboard By-Pass Switching Supply Input/Output Filters Power Supply Decoupling High Frequency Noise Reduction Laptop LCD Displays Automotive Digital Equipment BS O Portable Electronic Equipment Specifications Operating Temperature: Rated Voltage: Surge Voltage: Capacitance Range: Capacitance Tolerance: Dissipation Factor: O DC Leakage Current: Load Life: -40 ºC to +105 ºC 2 Vdc to 6.3 Vdc 1.25 x Rated Voltage 56 µF to 470 µF ±20% @120 Hz, +20 ºC 0.06 max (1.8/1.9); 0.10 max (2.8/4.2) (Case “H” mm; 120 Hz +20 ºC I ≤ 0.06 CV after 2 minutes 1000 h @ 105 ºC Δ Capacitance: ±10% of the initial measured value D.F. ≤ Initial specified value DCL ≤ Initial specified value CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Type SPA Solid Polymer Aluminum SMT Capacitors Markings Capacitance (“R” = Decimal Point) Polarity Stripe (Anode) + W.V. Code BS O Lot Code LE T E Outline Drawing D = 2.0V E = 2.5V G = 4.0V J = 6.3V Ordering Information 560 O SPA CDE Type Capacitance Code 560 = 56 µF 820 = 82 µF 101 = 100 µF M 06 R Packaging Code R = Tape & Reel see tables Capacitance Tolerance M = ± 20% WVDC Code 02 = 2.0 Vdc 0E = 2.5 Vdc 04 = 4.0 Vdc 06 = 6.3 Vdc CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Ratings Type SPA Solid Polymer Aluminum SMT Capacitors Capacitance Catalog (µF) Part Number Maximum Maximum Case E.S.R. Ripple Current Height 100 kHz/20 ºC 100 kHz/105 ºC (Tape & Reel) (Ω) 2.0 Vdc H (Arms) (mm) Qty/Reel SPA121M02R 0.009 3.0 1.8 ±.1 3500 150 SPA151M02R 0.009 3.0 1.8 ±.1 3500 180 SPA181M02R 0.009 3.0 1.9 ±.2 3500 270 SPA271M02R 0.007 3.5 2.8 ±.2 2000 330 SPA331M02R 0.007 3.5 2.8 ±.2 2000 390 SPA391M02R 0.005 4.0 4.2 ±.1 2000 470 SPA471M02R** 0.005 4.0 4.2 ±.1 2000 0.009 3.0 1.8 ±.1 3500 0.009 3.0 1.8 ±.1 3500 0.009 3.0 1.9 ±.2 3500 0.007 3.5 2.8 ±.2 2000 SPA271M0ER 0.007 3.5 2.8 ±.2 2000 SPA331M0ER 0.005 4.0 4.2 ±.1 2000 SPA391M0ER 0.005 4.0 4.2 ±.1 2000 LE T E 120 2.5 Vdc SPA101M0ER 120 SPA121M0ER 150 SPA151M0ER 220 SPA221M0ER 270 330 390 BS O 100 4.0 Vdc 82 100 150 0.009 3.0 1.8 ±.1 3500 SPA101M04R 0.009 3.0 1.9 ±.2 3500 SPA151M04R 0.007 3.5 2.8 ±.2 2000 SPA221M04R 0.005 4.0 4.2 ±.1 2000 O 220 SPA820M04R 6.3 Vdc 56 SPA560M06R 0.009 3.0 1.8 ±.1 3500 68 SPA680M06R 0.009 3.0 1.9 ±.2 3500 120 SPA121M06R 0.007 3.5 2.8 ±.2 2000 180 SPA181M06R 0.005 4.0 4.2 ±.1 2000 Highlighted part numbers no longer available CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Type SPA Solid Polymer Aluminum SMT Capacitors O BS O LE T E Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and data (collectively, the “Information”) in this datasheet or other publication are subject to change. The customer is responsible for checking, confirming and verifying the extent to which the Information contained in this datasheet or other publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on the knowledge that the Cornell Dubilier company providing such statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representation regarding any such matter – and Cornell Dubilier specifically and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specific customer application, use, storage, transportation, or operating environment. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be required. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com