32M11C-4001

3.1 mm Round Type LED, Viewing Angle - 60° Package Dimension 32M Series Directivity Radiation All Dimensions are in mm (inch) Electrical Characterstics Electro - Optical Part No. Chip Material Emitted Colour Lens Colour Wave Length Characterstics (If = 20mA) Vf (v) Typ. 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 2.6 2.6 2.6 2.6 2.6 2.6 Max 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 3.8 3.8 3.8 3.8 3.8 3.8 Iv (mcd) 2 10 20 150 10 50 10 50 10 50 200 1000 5000 5000 2000 500 λP (nm) 32M70D-4001 32M70T-4001 32M71D-4001 32M71T-4001 32M41D-4001 32M41T-4001 32M51D-4001 32M51T-4001 32M61D-4001 32M61T-4001 32M11D-4001 32M11C-4001 32M22C-4001 32M32C-4001 32M82C-4001 32M82W-4001 GaP/GaP GaP/GaP GaAsP/GaP GaAsP/GaP GaP/GaP GaP/GaP GaAsP/GaP GaAsP/GaP GaAsP/GaP GaAsP/GaP GaN GaN GaN GaN GaN GaN Hi-Red Hi-Red Hi-Eff Red Hi-Eff Red Yellow Green Yellow Green Yellow Yellow Orange Orange Blue Blue Blue Green Green White White Red Diffused Red Transparent Red Diffused Red Transparent Green Diffused Green Transparent Yellow Diffused Yellow Transparent Orange Diffused Orange Transparent Blue Diffused Water Water Water Water Water Diffused 700 700 640 640 570 570 585 585 605 605 470 470 505 525 32M_LEDRev1_100506 Continental Device India Limited Page 1 of 2 Other Parameters applicable for all LEDs Electrical Parameter Reverse Voltage Vr (v) Green (GaP) Red (GaP) Orange (GaAsP/GaP) Yellow (GaAsP/GaP) Ultra Yellow (AlGaInP) Ultra Orange (AlGaInP) Ultra Red (AlGaInP) Ultra Yellow Green Blue (GaN/SiC) 6 6 6 6 6 6 6 6 6 Forward Current If (mA) 25 25 25 25 30 30 30 30 30 Forward Current Peak Ifp* (mA) 100 100 100 100 100 100 100 100 100 (at T a = 25ºC) Power Pd (mW) 80 80 80 80 80 80 80 80 170 Operating Temp Topr (ºC) -25 ~ +80 -25 ~ +80 -25 ~ +80 -25 ~ +80 -25 ~ +80 -25 ~ +80 -25 ~ +80 -25 ~ +80 -25 ~ +80 Storage TempTstg (ºC) -40 ~ +40 -40 ~ +40 -40 ~ +40 -40 ~ +40 -40 ~ +40 -40 ~ +40 -40 ~ +40 -40 ~ +40 -40 ~ +40 32M Series Colour * 1/10 Duty Cycle. 0.1 ms Pulse Width Soldering Instructions DIP and Wave Soldering Types Temp of Soldering Bath ≤ 260 ºC LEDs ≤ 260 ºC 5S >4mm ≤ 300 ºC 5S >4mm Max Soldering Time 3S Distance from Solder Joint to Case >2mm Iron Soldering (1.5 mm Iron Tip) Temp of Soldering Iron ≤ 300 ºC Distance Max Soldering from Solder to case Time 3S >2mm Component Disposal Instructions 1. All Devices are RoHS compliant, customers are requested to please dispose as per prevailing Environmental Legislation of their Country. 2. In Europe, please dispose as per EU Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE). Disclaimer The product information and the selection guides facilitate selection of the nxt LEDs best suited for application in your product(s) as per your requirement. It is recommended that you completely review our Data Sheet(s) so as to confirm that the LED(s) meet functionality parameters for your application. The information furnished in the Data Sheet and on the CDIL Web Site/CD are believed to be accurate and reliable. CDIL however, does not assume responsibility for inaccuracies or incomplete information. Furthermore, CDIL does not assume liability whatsoever, arising out of the application or use of any CDIL product; neither does it convey any license under its patent rights nor rights of others. These products are not designed for use in life saving/support appliances or systems. CDIL customers selling these products (either as individual LEDs or incorporated in their end products), in any life saving/support appliances or systems or applications do so at their own risk and CDIL will not be responsible for any damages resulting from such sale(s).CDIL strives for continuous improvement and reserves the right to change the specifications of its products without prior notice. CDIL is a registered Trademark of Continental Device India Limited C-120 Naraina Industrial Area, New Delhi 110 028, India. Telephone + 91-11-2579 6150, 4141 1112 Fax + 91-11-2579 5290, 4141 1119 email@cdil.com www.cdilsemi.com 32M_LEDRev1_100506 Continental Device India Limited Page 2 of 2