CMBA847

Continental Device India Limited An ISO/TS 16949, ISO 9001 and ISO 14001 Certified Company NPN EPITAXIAL PLANAR SILICON TRANSISTOR PIN CONFIG URATION (NPN) 1 = BASE 2 = EMITTER 3 = COLLECTOR CMBA847 SOT23 MARKING : AS BELOW 3 1 2 ABSOLUTE MAXIMUM RATINGS DESCRIPTION SYMBOL VALUE VCBO 50 Collector -Base Voltage VCEO 50 Collector -Emitter Voltage VEBO 6.0 Emitter Base Voltage IC 200 Collector Current PC 150 Collector Power Dissipation Tj, Tstg -55 to +150 Operating And Storage Junction Temperature Range ELECTRICAL CHARACTERISTICS (Ta= 25 deg C unless otherwise specified) DESCRIPTION SYMBOL TEST CONDITION MIN TYP VCEO IC=100uA, IB=0 50 Collector -Emitter Voltage ICBO VCB=50V, IE=0 Collector Cut off Current IEBO VEB=6V, IC=0 Emitter Cut off Current hFE(1) IC=1mA,VCE=6V 150 DC Current Gain hFE(2) IC=0.1mA,VCE=6V 50 VCE(Sat) IC=100mA,IB=10mA Collector Emitter Saturation Voltage VBE(Sat) IC=100mA,IB=10mA Base Emitter Saturation Voltage Dynamic Characteristics ft VCE=6V,IC=10mA, 200 Transition Frequency Cob VCB=6V, IE=0 3.5 Collector Output Capacitance f=1MHz NF VCE=6V, IE=0.1mA Noise Figure f=1kHz, Rg=2kohms CLASSIFICATION E F G hFE(1) 150-300 250-500 400-800 MARKING NA NB NC UNIT V V V mA mW deg C MAX 100 100 800 0.30 1.0 15 UNIT V nA nA V V MHz pF dB Continental Device India Limited Data Sheet Page 1 of 3 SOT-23 Formed SMD Package ±0.05 2.50 ± 0.02 0.60 ±0.025 1.30 ±0.02 0.60 SOT-23 Package Reel Information Reel specifications for W" Packing (13" reel) 14.4 MAX ø100.0± 0.5 / ø 54.5 ± 0.5 ø329.2± 0.5 / 178 ± 0.5 7.9 – 10.9 9.2± 0.5 ±0.025 2.90 ±0.05 1.90 0.40 +0.08 -0.02 1 cL 3 +0.5 –0.2 ø13.0 180 or 330 TRAILER 2 ø20.2 MIN 3° 3° DETAIL X ±0.02 0.60 PARTING LINE RO.08 ±0.01 0.12 ±4" ±3" ±0.04 0.06 R0.08 ±0.025 0.95 All dime nsion s in m m 330 / 180 mm – A ntistatic C oated Plastic R eel N O TES : N o. of D evices 1. 2. 3. 4. 5. 8m m Ta pe Size of Ree l 330 mm (13") 10,000 Pcs 8m m Ta pe Size of Ree l 180 mm (7") 3,000 Pcs 6° 0.21 7° ±0.05 2.50 5° The ba ndolier of 330 mm reel contains at least 1 0,000 devices. The ba ndolier of 180 mm reel contains at least 3 ,000 device s. N o m ore than 0.5% missing de vices / reel. 50 e mpty compartm ents for 330 mm reel. 15 em pty com partmen ts for 180 m m ree l. Three consecutive empty places m ight be found provided this gap is follow ed by 6 conse cutive device s. The carrier ta pe (le ader) starts with a t least 75 em pty positio ns (equivalent to 3 30 m m). In order to fix the carrier tape a self a dhesive tap e of 2 0 to 5 0 m m is app lied. At the en d of the bandolie r at le ast 40 em pty positions (e quiva lent to 160 m m) are the re. Tape Specification for SOT-23 Surface Mount Device ± 0 .1 4.0 ± 0.05 ± 0.1 2.0 4.0 ± 0.1 1.75 +0.3 ± 0.05 - 0.1 3.5 8.0 5.75 MAX ± 0.05 ± 0.05 1.55 ± 0.10 2.77 ± 0.1 1.22 1.6 MAX 1.0 ± 0.10 3.15 Direction of Unreelin g All dimensions in mm Packing Detail PACKAGE Details SOT-23 T&R 3K/reel 10K/reel STANDARD PACK Net Weight/Qty 136 gm/3K pcs 415 gm/10K pcs Size 3" x 7.5" x 7.5" 9" x 9" x 9" 13" x 13" x 0.5" Data Sheet INNER CARTON BOX Qty 12.0K 51.0K 10.0K Size OUTER CARTON BOX Qty 192.0K 408.0K 300.0K Gr Wt 12 kgs 28 kgs 16 kgs 17" x 15" x 13.5" 19" x 19" x 19" 17" x 15" x 13.5" Continental Device India Limited Page 2 of 3 FIXING TAPE 0.08 LEADER ± 0.02 0.60 1.30 7° 0.08 ± 0.02 0.60 2.0± 0.5 Notes Disclaimer The product information and the selection guides facilitate selection of the CDIL's Discrete Semiconductor Device(s) best suited for application in your product(s) as per your requirement. It is recommended that you completely review our Data Sheet(s) so as to confirm that the Device(s) meet functionality parameters for your application. The information furnished on the CDIL Web Site/CD is believed to be accurate and reliable. CDIL however, does not assume responsibility for inaccuracies or incomplete information. Furthermore, CDIL does not assume liability whatsoever, arising out of the application or use of any CDIL product; neither does it convey any license under its patent rights nor rights of others. These products are not designed for use in life saving/support appliances or systems. CDIL customers selling these products (either as individual Discrete Semiconductor Devices or incorporated in their end products), in any life saving/support appliances or systems or applications do so at their own risk and CDIL will not be responsible for any damages resulting from such sale(s). CDIL strives for continuous improvement and reserves the right to change the specifications of its products without prior notice. CDIL is a registered Trademark of Continental Device India Limited C-120 Naraina Industrial Area, New Delhi 110 028, India. Telephone + 91-11-579 6150 Fax + 91-11-579 9569, 579 5290 e-mail sales@cdil.com www.cdil.com Continental Device India Limited Data Sheet Page 3 of 3