CX0805MKX7R7BB0

DATA SHEET SURFACE-MOUNT CERAMIC EMI FILTER CAPACITORS 10 V TO 100 V X2Y® Series Product Specification – Nov. 21, 2006 V.11 Phycomp Product specification Surface-mount ceramic EMI filter capacitors DESCRIPTION X2Y® Series X2Y® series is a breakthrough in the design of ceramic multilayer products for decoupling and filtering in an IPD (integrated passive device). X2Y® products comprise two identical Y-capacitors and one X-capacitor, integrated into a 4 terminal device, which is available in standard MLCC sizes. Thanks to the unique multilayer construction the device provides noise cancellation within the device, reducing ESL from nanohenry to picohenry levels. Using the unique balance between the Y-capacitors and the shielded multilayer structure the X2Y® products offer superior decoupling and filtering. The X2Y® device performs as a broadband filter enabling better EMC compliance for electrical equipment in a wide range of applications. FEATURES • Broadband Filtering and Decoupling: X2Y® is effective up to 10 GHz and frequencies beyond • Ultra Low ESL: Noise cancellation within X2Y® makes ESL reducing from nanohenry to picohenry levels • Bypass: Unlike feedthrough capacitors, X2Y® is in bypass, so no DC current limitations • Matched Y-caps: Two tightly matched line to ground capacitors in one device • Superior Balance: Temperature and voltage variations balanced of two Y-caps • Aging Reliability: Aging effects are equal on two Ycaps BENEFITS • Fewer Component in Filtering: One X2Y® can replace multiple inductors and/or capacitors • Superior Performance in Filtering: One X2Y® can eliminate both differential and common mode noises • Fewer Component in Decoupling: Up to 1:7 replacement of MLCC in power delivering system bypass networks • Superior Performance in Decoupling: Large or small, X2Y® components exhibit ultra low ESL • Total Cost Savings: Assembly cost savings through reduced component count and placement costs • Board Level Design Advantages: Dramatically reduces via drills, which blocks routing APPLICATIONS • EMI filtering on DC motors • Filtered connectors (airbag connectors, RJ-45 connectors) • High speed data-line filtering • Decoupling of supply-lines in high speed digital circuits • Broadband filtering. • Amplifier decoupling and EMI suppression. • IC Decoupling, on-package, onPCB. • DC power line filtering. • Data line filtering. • EMI suppression for DC motors. • Sensors • Audio 2006 Nov.21 V.11 2 www.yageo.com G1 A SCM049_V A G2 B G2 A G1 B G2 B Decoupling application G1 EMI filtering application Fig.1 Circuit of typical applications Phycomp Product specification Surface-mount ceramic EMI filter capacitors QUICK REFERENCE DATA DESCRIPTION Materials Rated voltage Capacitance range (Y-capacitor): 0603 series 0805 series 1206 series 1210 series 1410 series Tolerance on capacitance Test voltage (DC) for 1 minute Sectional specifications Detailed specification Climatic category (IEC 60068) 1.5 nF to 100 nF 4.7 nF to 180 nF 22 nF to 820 nF 47 nF to 1 µF 390 nF ±20% 2.5 × Ur X7R VALUE X2Y® Series 10 V, 16 V, 25 V, 50/63 V, 100 V (IEC) IEC 60384-10, second edition 1989-04; also based on CECC 32 100 based on CECC 32 101-801 X7R: 55/125/56 2006 Nov.21 V.11 3 www.yageo.com Phycomp Product specification Surface-mount ceramic EMI filter capacitors GENERAL SELECTION CHART C (pF) 10 22 47 100 220 330 1, 500 2, 200 4, 700 5, 600 10, 000 15,000 18 ,000 22 ,000 39 ,000 47 ,000 56 ,000 100, 000 180, 000 220, 000 270, 000 330, 000 390, 000 470, 000 560, 000 820, 000 1 000, 000 10 V 16 V 16 V 25 V 10 V 10 V 25 V 50 V/63 V 16 V 16 V 25 V 50 V/63 V 50 V/63 V 25 V 50 V/63 V 100 V 100 V 100 V 100 V X7R 0603 0805 1206 1210 X2Y® Series 1410 50 V 2006 Nov.21 V.11 4 www.yageo.com Phycomp Product specification Surface-mount ceramic EMI filter capacitors MECHANICAL DATA X2Y® Series L A SCM051 W ground equivalent circuit configuration line Cy C line Cx Cy line ground T line Component type Simplified type For dimensions see Table 1. Fig.2. Component outline & simplified outline Physical dimensions Table 1 Capacitor dimensions L W T MIN. 0.55 0.75 1.10 1.10 1.10 0.022 0.030 0.043 0.043 0.043 MAX. 0.75 0.95 1.40 1.70 1.50 0.030 0.037 0.055 0.067 0.059 MIN. 0.25 0.25 0.25 0.25 0.25 0.010 0.010 0.010 0.010 0.010 A MAX. 0.55 0.55 0.65 0.65 0.65 0.022 0.022 0.026 0.026 0.026 C CASE SIZE Dimensions in millimetres 0603 0805 1206 1210 1410 0603 0805 1206 1210 1410 1.6 ± 0.15 2.0 ± 0.15 3.2 ± 0.20 3.2 ± 0.20 3.56 ± 0.20 0.063 ± 0.006 0.079 ± 0.006 0.126 ± 0.008 0.126 ± 0.008 0.140 ± 0.008 0.85 ± 0.15 1.25 ± 0.15 1.65 ± 0.20 2.5 ± 0.20 2.5 ± 0.20 0.032 ± 0.006 0.049 ± 0.006 0.065 ± 0.008 0.098 ± 0.008 0.098 ± 0.008 0.40 ±0.20 0.70 ±0.20 1.20 ±0.30 1.20 ±0.30 1.20 ±0.30 0.016 ±0.008 0.028 ±0.008 0.047 ±0.012 0.047 ±0.012 0.047 ±0.012 Dimensions in inches 2006 Nov.21 V.11 5 www.yageo.com Phycomp Product specification Surface-mount ceramic EMI filter capacitors ELECTRICAL CHARACTERISTICS FOR X7R Class 2 capacitors; X7R dielectric; NiSn terminations X2Y® Series Unless otherwise stated all electrical values apply at an ambient temperature of 20 ±1 °C, an atmospheric pressure of 86 to 106 kPa, and a relative humidity of 63 to 67%. DESCRIPTION Rated voltage Ur (DC) Capacitance range Tolerance on capacitance after 1,000 hours Dissipation factor (D.F.); note 1 10 V 16 V ≥25 V Insulation resistance after 1 minute at Ur (DC) Maximum capacitance change as a function of temperature Aging Note 1. Measured at 20 °C, 1 V and 1 MHz, using a four-gauge method. 5% 3.5% 2.5% Rins × C > 500 seconds ±15% Typical 1% per time decade 1.5 nF to 1 µF ±20% VALUE 10 V, 16 V, 25 V, 50 V/63 V and 100 V 2006 Nov.21 V.11 6 www.yageo.com Phycomp Product specification Surface-mount ceramic EMI filter capacitors SELECTION CHART FOR X7R SIZES 0603, 0805, 1206 (1) Y-CAPACITOR SIZE CAP. (nF) 1.5 2.2 4.7 5.6 10 22 47 56 100 0805 4.7 10 15 18 22 39 47 100 180 1206 22 47 100 180 220 390 470 820 Notes 1. 2. 3. Other values available on request. VOLTAGE RATING (V) 100 100 100 100 50 / 63 25 16 16 10 100 100 50 / 63 50 / 63 25 25 16 16 10 100 50 / 63 50 / 63 25 16 16 10 10 X-CAPACITOR CAP. (nF) 0.75 1.1 2.4 2.8 5 11 24 28 50 24 5 8 9 11 20 24 50 90 11 24 50 90 110 195 235 410 VOLTAGE RATING (V) 200 200 200 200 100 50 32 32 20 200 200 100 100 50 50 32 32 20 200 100 100 50 32 32 20 20 THICKNESS (mm) 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.85 0.85 0.85 0.85 0.85 0.85 0.85 0.85 0.85 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.20 X2Y® Series CTC ORDERING CODE (2) (3) 0603 CX 0603 MR X7R 0BB 152 CX 0603 MR X7R 0BB 222 CX 0603 MR X7R 0BB 472 CX 0603 MR X7R 0BB 562 CX 0603 MR X7R 9BB 103 CX 0603 MR X7R 7BB 223 CX 0603 MR X7R 7BB 473 CX 0603 MR X7R 8BB 563 CX 0603 MR X7R 6BB 104 CX 0805 MR X7R 0BB 472 CX 0805 MR X7R 0BB 103 CX 0805 MR X7R 9BB 153 CX 0805 MR X7R 9BB 183 CX 0805 MR X7R 8BB 223 CX 0805 MR X7R 8BB 393 CX 0805 MR X7R 7BB 473 CX 0805 MR X7R 7BB 104 CX 0805 MR X7R 7BB 184 CX 1206 MK X7R 0BB 223 CX 1206 MK X7R 9BB 473 CX 1206 MK X7R 9BB 104 CX 1206 MK X7R 8BB 184 CX 1206 MK X7R 7BB 224 CX 1206 MK X7R 7BB 394 CX 1206 MK X7R 6BB 474 CX 1206 MK X7R 6BB 824 Ordering codes for preferred versions (±20% tolerance, 180 mm reel). For other packing and tolerance see section “Ordering Code Information”. For 12NC ordering codes see Table 2. 2006 Nov.21 V.11 7 www.yageo.com Phycomp Product specification Surface-mount ceramic EMI filter capacitors SELECTION CHART FOR X7R SIZES 1210, 1410 (1) Y-CAPACITOR SIZE CAP. (nF) 47 100 220 470 560 820 1,000 1410 Notes 1. 2. 3. Other values available on request. 390 VOLTAGE RATING (V) 100 50 / 63 50 / 63 25 25 16 16 50 X-CAPACITOR CAP. (nF) 24 50 110 235 280 410 500 195 VOLTAGE RATING (V) 200 100 100 50 50 32 32 100 THICKNESS (mm) 1.20 1.20 1.60 1.60 1.90 1.60 1.60 1.30 X2Y® Series CTC ORDERING CODE (2) (3) 1210 CX 1210 MK X7R 0BB 473 CX 1210 MK X7R 9BB 104 CX 1210 MK X7R 9BB 224 CX 1210 MK X7R 8BB 474 CX 1210 MK X7R 8BB 564 CX 1210 MK X7R 7BB 824 CX 1210 MK X7R 7BB 105 CX 1410 MK X7R 9BB 394 Ordering codes for preferred versions (±20% tolerance, 180 mm reel). For other packing and tolerance see section “Ordering Code Information”. For 12NC ordering codes see Table 2. Thickness classification and packing quantities for X7R QUANTITY PER REEL THICKNESS CLASSIFICATION (mm) PAPER 0.6 ±0.1 0.85 ±0.1 1.2 ±0.15 1.6 ±0.15 1.9 ±0.2 4,000 4,000 − − − 8 mm TAPE WIDTH ∅180 mm; 7" BLISTER − − 2,500 2,500 2,500 2006 Nov.21 V.11 8 www.yageo.com Phycomp Product specification Surface-mount ceramic EMI filter capacitors ORDERING INFORMATION Components may be ordered by using Yageo part number. Table 2 TC X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R SIZE 0603 0603 0603 0603 0603 0603 0603 0603 0603 0805 0805 0805 0805 0805 0805 0805 0805 0805 1206 1206 1206 1206 1206 1206 1206 1206 1210 1210 1210 1210 1210 1210 1210 1410 CAPACITANCE CAPACITANCE VALUE TOLERANCE Y-CAP 1.5 nF 2.2 nF 4.7 nF 5.6 nF 10 nF 22 nF 47 nF 56 nF 100 nF 4.7 nF 10 nF 15 nF 18 nF 22 nF 39 nF 47 nF 100 nF 180 nF 22 nF 47 nF 100 nF 180 nF 220 nF 390 nF 470 nF 820 nF 47 nF 100 nF 220 nF 470 nF 560 nF 820 nF 1 µF 390 µF Y-CAP ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% 9 RATED VOLTAGE (V) Y-CAP 100 100 100 100 50 / 63 25 16 16 10 100 100 50 / 63 50 / 63 25 25 16 16 10 100 50 / 63 50 / 63 25 16 16 10 10 100 50 / 63 50 / 63 25 25 16 16 50 CTC ORDERING CODE X2Y® Series QUANTITY PER REEL 4,000 4,000 4,000 4,000 4,000 4,000 4,000 4,000 4,000 4,000 4,000 4,000 4,000 4,000 4,000 4,000 4,000 4,000 2,500 2,500 2,500 2,500 2,500 2,500 2,500 2,500 2,500 2,500 2,500 2,500 2,500 2,500 2,500 2,500 www.yageo.com CX 0603 MR X7R 0BB 152 CX 0603 MR X7R 0BB 222 CX 0603 MR X7R 0BB 472 CX 0603 MR X7R 0BB 562 CX 0603 MR X7R 9BB 103 CX 0603 MR X7R 8BB 223 CX 0603 MR X7R 7BB 473 CX 0603 MR X7R 7BB 563 CX 0603 MR X7R 6BB 104 CX 0805 MR X7R 0BB 472 CX 0805 MR X7R 0BB 103 CX 0805 MR X7R 9BB 153 CX 0805 MR X7R 9BB 183 CX 0805 MR X7R 8BB 223 CX 0805 MR X7R 8BB 393 CX 0805 MR X7R 7BB 473 CX 0805 MR X7R 7BB 104 CX 0805 MR X7R 6BB 184 CX 1206 MK X7R 0BB 223 CX 1206 MK X7R 9BB 473 CX 1206 MK X7R 9BB 104 CX 1206 MK X7R 8BB 184 CX 1206 MK X7R 7BB 224 CX 1206 MK X7R 7BB 394 CX 1206 MK X7R 6BB 474 CX 1206 MK X7R 6BB 824 CX 1210 MK X7R 0BB 473 CX 1210 MK X7R 9BB 104 CX 1210 MK X7R 9BB 224 CX 1210 MK X7R 8BB 474 CX 1210 MK X7R 8BB 564 CX 1210 MK X7R 7BB 824 CX 1210 MK X7R 7BB 105 CX 1410 MK X7R 9BB 394 2006 Nov.21 V.11 Phycomp Product specification Surface-mount ceramic EMI filter capacitors Ordering code: Yageo part number Example: CX0805MRX7R8BB223 X2Y® Series CX 0805 M R X7R 8 B B 223 Code 1 - 2 Series name CX = X2Y® series Code 7 Capacitance tolerance M = ±20% Code 9 - 11 TC Material X7R NP0 Code 13 Termination B = Ni-Barrier Code 15 - 17 Capacitance value (2 significant digits + number of zeros; the third digit signifies the multiplying factor, and letter R is decimal point) 0=x1 1 = x 10 2 = x 102 3 = x 103 4 = x 104 5 = x 105 6 = x 106 Code 3 - 6 Size code EIA 0603 0805 1206 1210 1410 1812 mm (1608M) (2012M) (3216M) (3225M) (3625M) (4632M) Code 8 Packing style R = Paper tape reel ∅ 7 inch K = Embossed plastic tape reel ∅ 7 inch Code 12 Rated voltage 5 = 6.3 V 6 = 10 V 7 = 16 V 8 = 25 V 9 = 50 V 0 = 100 V Code 14 Process code B = X7R SCM045 2006 Nov.21 V.11 10 www.yageo.com Phycomp Product specification Surface-mount ceramic EMI filter capacitors RECOMMENDED DIMENSIONS OF SOLDER LANDS Table 3 Reflow soldering Footprint dimensions (mm) A 2.30 3.05 4.06 4.57 4.57 B 0.76 1.27 1.65 2.55 2.55 C 0.64 0.89 1.00 1.00 1.00 D 0.51 0.56 1.02 1.14 1.14 E 1.52 2.03 3.05 4.06 4.06 X2Y® Series CASE SIZE (EIA) 0603 0805 1206 1210 1410 Placement Accuracy (mm) ±0.20 ±0.20 ±0.25 ±0.25 ±0.25 C A D E B HBK085 Fig.3 Recommended dimensions of solder lands 2006 Nov.21 V.11 11 www.yageo.com Phycomp Product specification Surface-mount ceramic EMI filter capacitors MEASUREMENT SETUP X2Y® Series network analyzer SCM048 A G1 G2 19.2 0.8 0.8 1.6 B B A SCM046 12.55 25.6 12.55 Via Fig.4 • • • • X2Y® series through measurement Ground plane 50 Ω microstrip line with CPW design method X2Y® are soldered on a printed circuit board PCB: FR-4 substrate, with 50 Ω microstrip line Network Analyzer: Agilent E5071b Calibration: full 2-port calibration with 85033E kit Size 0603: A=0.5 mm, B=1.2 mm For other dimensions see Table 4 Fig.5 Table 4 Testing board for measurement Recommended dimensions of measurement A (mm) 0.5 ± 0.10 0.8 ± 0.10 1.2 ± 0.10 2.1 ± 0.15 2.1 ±0.15 B (mm) 1.2 ±0.10 1.6 ±0.10 2.8 ±0.15 2.8 ±0.15 3.1 ±0.15 CASE SIZE 0603 0805 1206 1210 1410 2006 Nov.21 V.11 12 www.yageo.com Phycomp Product specification Surface-mount ceramic EMI filter capacitors TESTS AND REQUIREMENTS Table 5 Test procedures and requirements TEST mounting PROCEDURE The capacitors may be mounted on printedcircuit boards or ceramic substrates any applicable method using ×10 magnification NP0: f = 1 MHz for C ≤ 1 nF, measuring at voltage 1 Vrms at 20 °C; f = 1 KHz for C > 1 nF, measuring at voltage 1 Vrms at 20 °C X5R/X7R/Y5V: f = 1 KHz for C ≤ 10 µF, measuring at voltage 1 Vrms at 20 °C 4.5.2 Dissipation fa ctor (D.F.) NP0: f = 1 MHz for C ≤ 1 nF, measuring at voltage 1 Vrms at 20 °C; f = 1 KHz for C > 1 nF, measuring at voltage 1 Vrms at 20 °C X5R/X7R/Y5V: f = 1 KHz for C ≤ 10 µF, measuring at voltage 1 Vrms at 20 °C 4.5.3 insulation resistance voltage proof at Ur (DC) for 1 minute X2Y® Series TEST METHOD IEC60384-21/22 4.3 REQUIREMENTS no visible damage 4.4 visual inspection and dimension check capacitance in accordance with specification within specified tolerance 4.5.1 in accordance with specifications in accordance with specification no breakdown or flashover 4.5.4.2 Test voltage (DC) applied for 1 minute Ur ≤ 100 V: 2.5 × Ur applied to NP0/X5R/X7R/Y5V series 100 V < Ur ≤ 200 V: 1.5 × Ur + 100 V applied to NP0/X7R series 200 V < Ur ≤ 500 V: 1.3 × Ur + 100 V applied to NP0/X7R series Ur > 500 V: 1.3 × Ur applied to NP0/X7R series I: 7.5 mA 2006 Nov.21 V.11 13 www.yageo.com Phycomp Product specification Surface-mount ceramic EMI filter capacitors Table 5 Test procedures and requirements (continued) TEST temperature characteristic PROCEDURE Between minimum and maximum temperature X2Y® Series TEST METHOD IEC 60384-21/22 4.6 REQUIREMENTS NP0: ∆C/C: ±30 ppm/°C X5R/X7R: ∆C/C: ±15% Y5V: ∆C/C: +22% ~ −82% 4.15 adhesion A force applied for 10 seconds to the line joining the terminations and in a plane parallel to the substrate for size ≥ 0603: a force of 5 N applied for size 0402: a force of 2.5 N applied for size 0201: a force of 1 N applied no visible damage 4.8 bond strength of plating on end face Mounting in accordance with IEC 60384-22 paragraph 4.3 Conditions: bending 1 mm at a rate of 1 mm/s, radius jig 340 mm no visible damage NP0: l∆C/Cl: ≤ 1% or 0.5 pF whichever is greater X5R/X7R/Y5V: l∆C/Cl: ≤ 10% 4.9 Resistance to soldering heat Precondition: 150 +0/−10 °C for 1 hour, then keep for 24 ±1 hours at room temperature Preheating: for size ≤ 1206: 120 to 150 °C for 1 minute Preheating: for size >1206: 100 to 120 °C for 1 minute and 170 to 200 °C for 1 minute Solder bath temperature: 260 ±5 °C Dipping time: 10 ±0.5 seconds Recovery time: 24 ±2 hours The termination shall be well tinned NP0: l∆C/Cl: ≤ 0.5% or 0.5 pF whichever is greater X5R/X7R: l∆C/Cl: ≤ 10% Y5V: l∆C/Cl: ≤ 20% D.F.: within initial specified value Rins: within initial specified value The termination shall be well tinned 4.10 Solderability Unmounted chips completely immersed in a solder bath at 235 ±5 °C Dipping time: 2 ±0.5 seconds Depth of immersion: 10 mm 2006 Nov.21 V.11 14 www.yageo.com Phycomp Product specification Surface-mount ceramic EMI filter capacitors Table 5 Test procedures and requirements (continued) TEST Rapid change of temperature PROCEDURE Preconditioning; 150 +0/−10 °C for 1 hour, then keep for 24 ±1 hours at room temperature 5 cycles with following detail: 30 minutes at lower category temperature; 30 minutes at upper category temperature Recovery time 24 ±2 hours X2Y® Series TEST METHOD IEC 60384-21/22 4.11 REQUIREMENTS No visual damage NP0: l∆C/Cl: ≤ 1% or 1 pF whichever is greater X5R/X7R: l∆C/Cl: ≤ 15% Y5V: l∆C/Cl: ≤ 20% D.F.: within initial specified value Rins: within initial specified value NP0: l∆C/Cl: ≤ 2% or 1 pF whichever is greater X5R/X7R: l∆C/Cl: ≤ 20% Y5V: l∆C/Cl: ≤ 30% NP0/X5R/X7R/Y5V: D.F.: 2 × initial value max. NP0: Rins ≥ 2,500 MΩ or Rins × Cr ≥ 25 seconds, whichever is less X5R/X7R/Y5V: Rins ≥ 500 MΩ or Rins × Cr ≥ 25 seconds, whichever is less NP0: l∆C/Cl: ≤ 2% or 1 pF whichever is greater X5R/X7R: l∆C/Cl: ≤ 20% Y5V: l∆C/Cl: ≤ 30% NP0/X5R/X7R/Y5V: D.F.: 2 × initial value max. NP0: Rins ≥ 4,000 MΩ or Rins × Cr ≥ 40 seconds, whichever is less X5R/X7R/Y5V: Rins ≥ 1,000 MΩ or Rins × Cr ≥ 50 seconds, whichever is less 4.13 Damp heat, with Ur load Initial measurements; after 150 +0/−10 °C for 1 hour, then keep for 24 ±1 hours at room temperature Duration and conditions: 500 ±12 hours at 40 ±2 °C; 90 to 95% RH; Ur applied Final measurement: perform a heat treatment at 150 +0/−10 °C for 1 hour, final measurements shall be carried out 24 ±1 hours after recovery at room temperature without load 4.14 Endurance Preconditioning; Initial measurements; after 150 +0/−10 °C for 1 hour, then keep for 24 ±1 hours at room temperature Duration and conditions: 1,000 ±12 hours at upper category temperature with 1.5 × Ur voltage applied Final measurement: perform a heat treatment at 150 +0/−10 °C for 1 hour, final measurements shall be carried out 24 ±1 hours after recovery at room temperature without load 2006 Nov.21 V.11 15 www.yageo.com Phycomp Product specification Surface-mount ceramic EMI filter capacitors REVISION HISTORY Revision Rev.5 Rev.6 Rev.7 Rev.8 Rev.9 Rev.10 Rev.11 Date 2001 Sep 25 2002 Jul 10 2003 Apr 02 2003 Jul 23 2003 Sep 09 2004 Apr 21 2006 Nov 21 Change Notification Description - Published on web X2Y® Series - Product range extended in all materials and sizes; - Insertion loss measurements added. - Updated company logo - Cover page revised - Cover page corrected - Product range updated - NP0, Y5V and size 1812 removed. - Size 1410 extended - Product applications, features and benefits update - Measurement setup added - Updated tests and requirements 2006 Nov.21 V.11 16 www.yageo.com