RF SWITCH
CG2164X3
Dual-Band
Wireless
DPDT RF
Switch
Enter a Short
Document/Title
Name
Here
DESCRIPTION
PACKAGE
The CG2164X3 is a GaAs MMIC DPDT (Double
Pole Double Throw) switch for 2.5 GHz and 6 GHz
dual-band wireless LAN applications
6-pin TSON Package
(1.5mm x 1.5mm x 0.37mm)
FEATURES
Control Voltage:
VC(H) = 1.8 to 5.0 V (3.0V TYP.)
VC(L) = -0.2 to 0.2 V (0V TYP.)
Low Insertion Loss:
Lins = 0.50 dB TYP. @ f = 2.5 GHz
Lins = 0.60 dB TYP. @ f = 6.0 GHz
High Isolation:
ISL = 23 dB TYP. @ f = 2.5 GHz
ISL = 15 dB TYP. @ f = 6.0 GHz
Power Handling:
Pin(0.5dB) = +32 dBm TYP. @ f = 2.5 GHz,
VC(H) = 3.0 V, VC(L) = 0 V
Pin(0.5dB) = +30 dBm TYP. @ f = 6.0 GHz,
VC(H) = 3.0 V, VC(L) = 0 V
APPLICATIONS
Dual-band wireless LAN
(IEEE802.11a/b/g/n/ac)
ORDERING INFORMATION
Part Number
Order Number
CG2164X3
CG2164X3-C2
CG2164X3-EVAL
CG2164X3-EVAL
Package
6-pin plastic
TSON
(Pb-Free)
1
This document is subject to change without notice.
Date Published: October 2017
CDS-0033-06 (Issue E)
Marking
C0N
Description
• Embossed tape 8 mm wide
• Pin 1, 6 face the perforation side
of the tape
• MOQ 10 kpcs/reel
• Evaluation Board with DC block
capacitors, power supply bypass
capacitors, and RF and DC
connectors
• MOQ 1
CG2164X3
PIN CONFIGURATION AND
INTERNAL BLOCK DIAGRAM
(Top View)
1
C0N
2
6
1
6
6
1
5
2
5
5
2
4
3
(Bottom View)
(Top View)
3
4
3
4
Pin No.
Pin Name
1
ANT2
2
VC2
3
RX
4
TX
5
VC1
6
ANT1
Remark Exposed pad : GND
TRUTH TABLE
VC1
VC2
ANT1-TX
ANT1-RX
ANT2-TX
ANT2-RX
High
Low
Low
High
OFF
ON
ON
OFF
ON
OFF
OFF
ON
ABSOLUTE MAXIMUM RATINGS
(TA = +25°C, unless otherwise specified)
Parameter
Symbol
Rating
Unit
Note 1
Control Voltage
VC
6.0
Input Power
Pin1
+33Note 2
dBm
Pin2
Note 3
+26
dBm
Operating Ambient Temperature
TA
-45~+85
°C
Storage Temperature
Tstg
-55~+150
°C
Note
V
1. |VC1 - VC2|≦6.0V
2. 3.0V≦|VC1 – VC2|≦5.0V f ≧ 0.5GHz
3. 3.0V≦|VC1 – VC2|≦5.0V f ≧ 0.05GHz
RECOMMENDED OPERATING RANGE
(TA = +25°C, unless otherwise specified)
Parameter
Symbol
MIN.
TYP.
MAX.
Unit
f
0.05
-
6.0
GHz
Switch Control Voltage (H)
VC(H)
+1.8
+3.0
+5.0
V
Switch Control Voltage (L)
VC(L)
-0.2
0
+0.2
V
Operating Frequency
This document is subject to change without notice.
2
CG2164X3
ELECTRICAL CHARACTERISTICS 1
(TA=+25°C, VC(H)=3.0V, VC(L)=0V, Zo=50Ω, DC Block Capacitance=8pF, unless otherwise specified)
Parameter
Insertion Loss
Isolation
(ANT to TX, RX)
Isolation
(ANT1 to ANT2, TX to RX)
Symbol
Note1
MIN.
TYP.
MAX.
Unit
-
0.40
0.65
dB
Lins1
f = 0.05 to 0.5 GHz
Lins2
f = 0.5 to 1.0 GHz Note1
-
0.45
0.70
dB
Lins3
f = 1.0 to 2.0 GHz Note1
-
0.50
0.75
dB
Lins4
f = 2.0 to 2.5 GHz
-
0.50
0.75
dB
Lins5
f = 2.5 to 4.9 GHz
-
0.55
0.90
dB
Lins6
f = 4.9 to 6.0 GHz
-
0.60
1.00
dB
ISL1
f = 0.05 to 0.5 GHz Note1
32
35
-
dB
ISL2
f = 0.5 to 1.0 GHz Note1
26
29
-
dB
ISL3
f = 1.0 to 2.0 GHz
Note1
21
24
-
dB
ISL4
f = 2.0 to 2.5 GHz
20
23
-
dB
ISL5
f = 2.5 to 4.9 GHz
13
16
-
dB
ISL6
f = 4.9 to 6.0 GHz
12
15
-
dB
ISL7
f = 0.05 to 0.5 GHz Note1
34
37
-
dB
ISL8
f = 0.5 to 1.0 GHz Note1
27
30
-
dB
ISL9
f = 1.0 to 2.0 GHz Note1
22
25
-
dB
ISL10
f = 2.0 to 2.5 GHz
22
25
-
dB
ISL11
f = 2.5 to 4.9 GHz
15
18
-
dB
ISL12
f = 4.9 to 6.0 GHz
15
18
-
dB
Return Loss
0.5 dB Loss Compression
Input Power Note2
Test Conditions
RL1
f = 0.05 to 2.0 GHz Note1
-
20
-
dB
RL2
f = 2.0 to 6.0 GHz
-
15
-
dB
f = 0.05 GHz
-
+24.5
-
dBm
f = 0.5 to 1.0 GHz
-
+31
-
dBm
f = 2.4 to 2.5 GHz
-
+32
-
dBm
Pin(0.5dB)
f = 4.9 to 6.0 GHz
+30
dBm
Note1 DC block capacitance = 1,000pF at f=0.05 to 2.0GHz
Note2 Pin(0.5dB) is the measured input power level when the insertion loss increases 0.5dB more than that of the
linear range.
This document is subject to change without notice.
3
CG2164X3
ELECTRICAL CHARACTERISTICS 2
(TA=+25℃, VC(H)=3.0V, VC(L)=0V, Zo=50Ω, DC Block Capacitance=8pF, unless otherwise specified)
Parameter
Symbol
2nd Harmonics
2f0
3rd Harmonics
3rd Order
Input Intercept Point
Error Vector Magnitude
3f0
IIP3
EVM
Switch Control Speed
tsw
Switch Control Current
Icont
This document is subject to change without notice.
Test Conditions
MIN.
TYP.
MAX.
Unit
f = 2.5 GHz, Pin=+20dBm
-
85
-
dBc
f = 6.0 GHz, Pin=+20dBm
-
80
-
dBc
f = 2.5 GHz, Pin=+20dBm
-
85
-
dBc
f = 6.0 GHz, Pin=+20dBm
-
85
-
dBc
-
+55
-
dBm
-
2.5
-
%
-
2.5
-
%
50% CTL to 90/10%
-
30
-
ns
Non RF
-
2
-
μA
f = 2.5GHz
2-tone 1MHz Spacing
802.11a, 64QAM, 54Mbps,
Pin≦+24.5dBm
802.11g, 64QAM, 54Mbps,
Pin≦+25dBm
4
CG2164X3
TYPICAL CHARACTERISTICS
(VC(H)=3V, VC(L)=0V, TA = +25˚C, DC Block Capacitance=8pF, through board loss is subtracted in insertion loss data)
Typical Insertion Loss vs. Frequency
Typical Isolation vs. Frequency
Typical Return Loss vs. Frequency
Typical Insertion Loss vs.
Input Power
This document is subject to change without notice.
5
CG2164X3
EVALUATION CIRCUIT
Note
C0
C0
C0
C0
C0 : 0.05 to 2.0 GHz 1,000pF
2.0 to 6.0 GHz 8pF
The application circuits and their parameters are for reference only and are not intended for use in actual designs.
DC Blocking Capacitors are required at all RF ports.
PACKAGE DIMENSIONS
6-pin Plastic TSON (Unit: mm)
This document is subject to change without notice.
6
CG2164X3
PCB Layout Footprint
6-pin TSON (Unit: mm)
The PCB Layout Footprint In this document Is for reference only.
RECOMMENDED SOLDERING CONDITIONS
Recommended Soldering Conditions are available on CEL's Part Summary page under Associated Documents
This document is subject to change without notice.
7
CG2164X3
REVISION HISTORY
Version
Change to current version
Page(s)
CDS-0033-01 (Issue A)
September 14, 2016
CDS-0033-02 (Issue B)
December 27, 2016
Preliminary datasheet
N/A
Revised Electrical Characteristics table
Added “Recommended Soldering Conditions” section
3, 5
CDS-0033-03 (Issue C)
March 20, 2017
CDS-0033-05 (Issue D)
August 28, 2017
Initial Datasheet. Revised Electrical Characteristics table
CDS-0033-06 (Issue E)
October 25, 2017
Added PCB Layout Footprint
Updated Characteristics tables and added Error Vector Magnitude
Added “Typical Characteristics” graphs section
Updated Evaluation Circuit diagram
This document is subject to change without notice.
3
3, 4, 5, 6
7
8
CG2164X3
[CAUTION]
・ All information included in this document is current as of the date this document is issued. Such information,
however, is subject to change without any prior notice.
・ You should not alter, modify, copy, or otherwise misappropriate any CEL product, whether in whole or in part.
・ CEL does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of
third parties by or arising from the use of CEL products or technical information described in this document. No
license, expressed, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual
property rights of CEL or others.
・ Descriptions of circuits, software and other related information in this document are provided only to illustrate the
operation of semiconductor products and application examples. You are fully responsible for the incorporation of
these circuits, software, and information in the design of your equipment. CEL assumes no responsibility for any
losses incurred by you or third parties arising from the use of these circuits, software, or information.
・ CEL has used reasonable care in preparing the information included in this document, but CEL does not warrant
that such information is error free. CEL assumes no liability whatsoever for any damages incurred by you resulting
from errors in or omissions from the information included herein.
・ Although CEL endeavors to improve the quality and reliability of its products, semiconductor products have specific
characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions.
Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or
damage caused by fire in the event of the failure of a CEL product, such as safety design for hardware and software
including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging
degradation or any other appropriate measures
Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final
products or system manufactured by you.
・ Please use CEL products in compliance with all applicable laws and regulations that regulate the inclusion or use of
controlled substances, including without limitation, the EU RoHS Directive.
CEL assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and
regulations.
・ This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent
of CEL.
・ Please contact CEL if you have any questions regarding the information contained in this document or CEL
products, or if you have any other inquiries.
This document is subject to change without notice.
9
CG2164X3
[CAUTION]
This product uses gallium arsenide (GaAs) of the toxic substance appointed in laws and ordinances.
GaAs vapor and powder are hazardous to human health if inhaled or ingested.
・ Do not dispose in fire or break up this product.
・ Do not chemically make gas or powder with this product.
・ When discarding this product, please obey the laws of your country.
・ Do not lick the product or in any way allow it to enter the mouth.
[CAUTION]
Although this device is designed to be as robust as possible, ESD (Electrostatic Discharge) can
damage this device. This device must be protected at all times from ESD. Static charges may easily
produce potentials of several kilovolts on the human body or equipment, which can discharge
without detection. Industry-standard ESD precautions should be used at all times.
CEL Headquarters • 4590 Patrick Henry Drive • Santa Clara, CA 95054 • Tel: (408) 919-2500 • www.cel.com
For a complete list of sales offices, representatives and distributors,
Please visit our website: www.cel.com/contactus
For inquiries email us at rfw@cel.com
This document is subject to change without notice.
10