CMP9010-2C-B

CMP9010 Dual Band Wi-Fi + BLE Connectivity for IoT 2.4/5GHz PCB-trace Antenna or connector Castellation Edge Connector Ultra low power connectivity for MPU/MCU designs 12x12mm LGA Package RF Pin Inquiry Today’s demanding IoT applications require multiprotocol wireless connectivity, MPU/MCU support, integration, low power consumption, and excellent range and coverage. CEL addresses these issues by offering a solution that integrates Wi-Fi and BLE, optimizing the wireless performance for challenging environments and power constrained applications, three antenna options, and provides developments tools, resources, and support to assist the developer. Below are highlights of CEL’s high-performing CMP9010. WIRELESS FEATURES • Wi-Fi SDIO Interface, BLE UART interface • Dual-Band 802.11 a/b/g/n • Tx: +20dBm • Single Stream; 20/40 MHz Channels • 150 Mbps (MCS7) • BLE 5.2 (Classic & BLE) EVALUATION PLATFORM • SD Interface Board for Easy Evaluation and development OTHER • Certification: FCC/IC/CE • 16.64 x 27.80 x 3.47 mm • 12 x 12 mm LGA Package • 0 C to +70 C or -40 C to +85 C Operation • Castellation Edge Connections to HOST PCB HOST DRIVER SOURCE CODE • Linux/Android for MPU • Pre-tested and integrated in NXP’s iMX 6/7/8 SDKs, Others MPUs supported • FreeRTOS for MCU • Pre-tested and integrated in NXP’s RT1170/1064/1060/1050/1024/1020 SDKs TOOLS AND SUPPORT • MCUXpresso IDE • Tx: 13.5 dBm • Hardware Design Guide • 2 Mbps, Long Range • Reference platform / Yocto examples • Advertising Extensions • CEL Software Repository • LTE Co-Existence • Long Range & Broad Coverage • STA, AP, Direct, Combo • WPA3 Security ANTENNA OPTIONS APPLICATIONS • Healthcare and Medical Devices • Building Automation • Retail/POS Terminals • Smart City • Integrated Dual-Band PCB Trace • Smart Home • MHF4 connector • IP Cameras • RF Pin • Connected Tools Questions? Call Us (408) 919-2500 PRELIMINARY SPECIFICATION. This document is subject to change without notice. www.cel.com