NDL5421P1D

1000 to 1600 nm OPTICAL FIBER COMMUNICATIONS φ50 µm InGaAs PIN PHOTO DIODE MODULE FEATURES • SMALL DARK CURRENT: ID = 0.1 nA • HIGH QUANTUM EFFICIENCY: η = 86% at λ = 1300 nm η = 75% at λ = 1550 nm • DETECTING AREA SIZE: φ 50 µm • LOW OPERATING VOLTAGE: VR = 5 V • LOW TERMINAL CAPACITANCE: Ct = 0.7 pF at f = 1.0 MHz, VR = 5 V • COAXIAL MODULE WITH MULTIMODE FIBER OR OPTIONAL SINGLEMODE FIBER: GI-50/125, SM-9/125 • HIGH SPEED RESPONSE: fC = 2.5 GHz MIN NDL5421P SERIES DESCRIPTION The NDL5421P Series is an InGaAs PIN photo diode module with multimode fiber. It is designed for 2.5 Gb/s optical fiber communication systems and covers the wavelength range between 1000 and 1600 with high efficiency. ELECTRO-OPTICAL CHARACTERISTICS (TC = 25°C) PART NUMBER PACKAGE OUTLINE SYMBOLS ID Ct η S fC PARAMETERS AND CONDITIONS Dark Current, VR = 5 V Terminal Capacitance, VR = 5 V, f = 1 MHz Quantum Efficiency, λ = 1300 nm λ = 1550 nm Responsivity, λ = 1300 nm λ = 1550 nm UNITS nA pF % A/W GHz 75 64 0.78 0.80 2.5 MIN NDL5421P Series TYP 0.1 0.7 86 75 0.89 0.94 MAX 1.0 0.9 Cut-off Frequency, VR = 5 V, λ = 1300 nm, RL = 50 Ω California Eastern Laboratories NDL5421P SERIES ABSOLUTE MAXIMUM RATINGS1 (TC = 25°C, unless otherwise specified) SYMBOLS VR IF PIN TC TSTG PARAMETERS Reverse Voltage Forward Current Optical Input Power Operating Case Temp. Storage Temperature UNITS V mA mW °C °C RATINGS 20 10 8 -40 to +85 -40 to +85 Note: 1. Operation in excess of any one of these parameters may result in permanent damage. TYPICAL PERFORMANCE CURVES (TC = 25°C, unless otherwise specified) WAVELENGTH DEPENDENCE OF QUANTUM EFFICIENCY TEMPERATURE DEPENDENCE OF RESPONSIVITY Responsivity (Relative Value), ∆S/S (%) 100 10 λ = 1300 nm Quantum Efficiency, η (%) 80 60 0 40 20 0 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 -10 -60 -40 -20 0 20 40 60 80 100 Wavelength, λ (µm) Operating Case Temperature, TC (°C) REVERSE VOLTAGE DEPENDENCE OF DARK CURRENT 10 TEMPERATURE DEPENDENCE OF DARK CURRENT 101 VR = 5 V 1.0 TC = 75°C 50°C Dark Current, ID (nA) Dark Current,ID (nA) 100 0.1 25°C 10-1 0°C 0.01 -25°C 10-2 0.001 0 10 20 10-3 -60 -40 -20 0 20 40 60 80 100 Reverse Voltage, VR (V) Operating Case Temperature, TC (°C) NDL5421P SERIES TYPICAL PERFORMANCE CURVES (TC = 25°C, unless otherwise specified) REVERSE VOLTAGE DEPENDENCE OF TERMINAL CAPACITANCE 2 f = 1.0 MHz 12 9 6 FREQUENCY RESPONSE VR = 5 V λ = 1300 nm PIN = -10dB RL = 50 Ω Terminal Capacitance, Ct (pF) 1 Response (dB) 3 0 -3 -6 -9 -12 0.5 0.3 0.1 0.3 1 3 10 -15 0 2.5 5.0 Reverse Voltage, VR (V) Frequency, f (GHz) ORDERING INFORMATION PART NUMBER NDL5421P NDL5421PC NDL5421PD NDL5421PS NDL5421PSC NDL5421PSD NDL5421P1 NDL5421P1C NDL5421P1D NDL5421PS1 NDL5421P1SC NDL5421P1SD NDL5421P2 NDL5421P2C NDL5421P2D NDL5421PS2 NDL5421P2SC NDL5421P2SD AVAILABLE CONNECTOR Without Connector With FC-PC Connector With SC-PC Connector Without Connector With FC-PC Connector With SC-PC Connector Without Connector With FC-PC Connector With SC-PC Connector Without Connector With FC-PC Connector With SC-PC Connector Without Connector With FC-PC Connector With SC-PC Connector Without Connector With FC-PC Connector With SC-PC Connector DESCRIPTION GI-50/125 No Flange SM-9/125 GI-50/125 Flat Mount Flange SM-9/125 GI-50/125 Vertical Flange SM-9/125 NDL5421P SERIES OUTLINE DIMENSIONS (Units in mm) NDL5421P NDL5421P1 Optical Fiber GI-50/125 Length: 1 m MIN Shrunk Tube Optical Fiber GI-50/125 Length: 1 m MIN Shrunk Tube φ2.5 30.0 MAX φ6.0 - 0.1 +0.0 φ2.5 14.0±0.1 30.0 MAX 6.9±0.3 φ6.0- 0.1 12.5 MIN φ0.45 3 1 +0.0 6.9±0.3 3.9±0.5 2-φ2.2 4.0±0.1 12.5 MIN 6.0 - 0.1 +0.0 2 3.0±0.3 φ2.0 7.0±0.3 2 3 1 4.0±0.3 1.5 φ2.0 18.0±0.1 3 1 PIN CONNECTIONS 1. Anode (Negative) 2. Cathode (Positive) 3. Case NDL5421P2 2 Optical Fiber GI-50/125 Length: 1 m MIN Shrunk Tube φ2.5 30.0 MAX φ6.0- 0.1 2.5±0.1 0.5±0.1 +0.0 12.5 MIN 2-φ2.5 2 3 1 7.0±0.15 φ2.0 12.0±0.1 16.0±0.2 NDL5421P SERIES HANDLING PRECAUTION FOR PD/APD MODULE The NEC PD/APD module has heat shrink tubing to protect the ferrule edge (*1) and the junction between the ferrule and the module body (*2). In order to avoid breaking the fiber and/or optical coupling degradation, NEC recommends the following handling precautions: 1. Do not make the fiber bend radius less than 30 mm (*3). 2. Do not bend the fiber within the 18 mm section from the module body (*4). 3. Do not stress the ferrule with a lateral force exceeding 500 g (*5). fiber 30 mm MIN (*3) (*1) 18 mm MIN (*4) ferrule (*5) (*2) module body EXCLUSIVE NORTH AMERICAN AGENT FOR RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS CALIFORNIA EASTERN LABORATORIES ¥ Headquarters ¥ 4590 Patrick Henry Drive ¥ Santa Clara, CA 95054-1817 ¥ (408) 988-3500 ¥ Telex 34-6393 ¥ FAX (408) 988-027 24-Hour Fax-On-Demand: 800-390-3232 (U.S. and Canada only) ¥ Internet: http://WWW.CEL.COM 11/14/2000 DATA SUBJECT TO CHANGE WITHOUT NOTICE