NDL5461PD

1000 to 1600 nm OPTICAL FIBER COMMUNICATIONS φ80 µm InGaAs PIN PHOTO DIODE MODULE FEATURES • SMALL DARK CURRENT: ID = 0.1 nA • HIGH QUANTUM EFFICIENCY: η = 86% at λ = 1300 nm η = 75% at λ = 1550 nm • DETECTING AREA SIZE: φ 80 µm • COAXIAL MODULE WITH MULTIMODE FIBER: GI-50/125 • OPTIONAL SINGLE MODE FIBER: SM-9/125 • LOW OPERATING VOLTAGE: VR = 5 V NDL5461P SERIES DESCRIPTION The NDL5461P Series are InGaAs PIN photo diode modules with multimode fiber. They are designed for long wavelength transmission systems and cover the wavelength range between 1000 and 1600 nm with high efficiency. ELECTRO-OPTICAL CHARACTERISTICS (TC = 25°C) PART NUMBER SYMBOLS ID Ct η S fC PARAMETERS AND CONDITIONS Dark Current, VR = 5 V Terminal Capacitance, VR = 5 V, f = 1 MHz Quantum Efficiency, λ = 1300 nm λ = 1550 nm Responsivity, λ = 1300 nm λ = 1550 nm Cut-off Frequency, VR = 5 V, λ = 1300 nm, RL = 50 Ω UNITS nA pF % A/W GHz 75 64 0.78 0.80 2.5 MIN NDL5461P Series TYP 0.1 1.0 86 75 0.89 0.94 MAX 1.0 1.5 California Eastern Laboratories NDL5461P SERIES ABSOLUTE MAXIMUM RATINGS1 (TC = 25°C, unless otherwise specified) SYMBOLS VR IF PIN TC TSTG PARAMETERS Reverse Voltage Forward Current Optical Input Power Operating Case Temp. Storage Temperature UNITS V mA mW °C °C RATINGS 20 10 8 -40 to +85 -40 to +85 Note: 1. Operation in excess of any one of these parameters may result in permanent damage. TYPICAL PERFORMANCE CURVES (TC = 25°C, unless otherwise specified) WAVELENGTH DEPENDENCE OF QUANTUM EFFICIENCY TEMPERATURE DEPENDENCE OF RESPONSIVITY Responsivity (Relative Value), ∆S/S (%) 100 10 λ = 1300 nm Quantum Efficiency, η (%) 80 60 0 40 20 0 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 -10 -60 -40 -20 0 20 40 60 80 100 Wavelength, λ (µm) Operating Case Temperature, TC (°C) REVERSE VOLTAGE DEPENDENCE OF DARK CURRENT 10 101 TEMPERATURE DEPENDENCE OF DARK CURRENT VR = 5 V Dark Current, Current, ID (nA) 1.0 TC = 75°C 50°C 25°C Dark Current, ID (nA) 100 0.1 0°C -25°C 10-1 0.01 10-2 0.001 0 10 20 10-3 -60 -40 -20 0 20 40 60 80 100 Reverse Voltage, VR (V) Operating Case Temperature, TC (°C) NDL5461P SERIES TYPICAL PERFORMANCE CURVES (TC = 25°C, unless otherwise specified) REVERSE VOLTAGE DEPENDENCE OF TERMINAL CAPACITANCE 5 f = 1.0 MHz FREQUENCY RESPONSE VR = 10 V λ = 1300 nm RL = 50 Ω Terminal Capacitance, Ct (pF) 1 0.5 0.01 0.1 1 10 100 Response (3 dB/div.) 0 2.5 5.0 Reverse Voltage, VR (V) Frequency, f (GHz) NDL5461P SERIES OUTLINE DIMENSIONS (Units in mm) NDL5461P NDL5461P1 Optical Fiber GI-50/125 Length: 1 m MIN Shrunk Tube Optical Fiber GI-50/125 Length: 1 m MIN Shrunk Tube φ2.5 30.0 MAX φ6.0 - 0.1 +0.0 φ2.5 14.0±0.1 30.0 MAX 6.9±0.3 φ6.0- 0.1 12.5 MIN φ0.45 3 1 +0.0 6.9±0.3 3.9±0.5 4.0±0.1 φ2.2 (2 places) 12.5 MIN 6.0 - 0.1 +0.0 2 3.0±0.3 φ2.0 7.0±0.3 2 3 1 4.0±0.3 1.5 φ2.0 18.0±0.1 3 1 PIN CONNECTIONS 1. Anode (Negative) 2. Cathode (Positive) 3. Case NDL5461P2 2 ORDERING INFORMATION PART NUMBER NDL5461P NDL5461PC NDL5461PD NDL5461PS NDL5461PSC NDL5461PSD NDL5461P1 NDL5461P1C NDL5461P1D NDL5461P1S NDL5461P1SC NDL5461P1SD NDL5461P2 NDL5461P2C NDL5461P2D NDL5461P2S NDL5461P2SC NDL5461P2SD AVAILABLE CONNECTOR Without Connector With FC-PC Connector With SC-PC Connector Without Connector With FC-PC Connector With SC-PC Connector Without Connector With FC-PC Connector With SC-PC Connector Without Connector With FC-PC Connector With SC-PC Connector Without Connector With FC-PC Connector With SC-PC Connector Without Connector With FC-PC Connector With SC-PC Connector DESCRIPTION GI-50/125 No Flange Optical Fiber GI-50/125 Length: 1 m MIN Shrunk Tube SM-9/125 GI-50/125 φ2.5 30.0 MAX Flat Mount Flange SM-9/125 φ6.0- 0.1 2.5±0.1 0.5±0.1 +0.0 GI-50/125 Vertical Flange 12.5 MIN φ2.5 (2 places) 2 3 1 SM-9/125 7.0±0.15 φ2.0 12.0±0.1 16.0±0.2 NDL5461P SERIES HANDLING PRECAUTION FOR PD/APD MODULE The NEC PD/APD module has heat shrink tubing to protect the ferrule edge (*1) and the junction between the ferrule and the module body (*2). In order to avoid breaking the fiber and/or optical coupling degradation, NEC recommends the following handling precautions: 1. Do not make the fiber bend radius less than 30 mm (*3). 2. Do not bend the fiber within the 18 mm section from the module body (*4). 3. Do not stress the ferrule with a lateral force exceeding 500 g (*5). fiber 30 mm MIN (*3) (*1) 18 mm MIN (*4) ferrule (*5) (*2) module body EXCLUSIVE NORTH AMERICAN AGENT FOR RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS CALIFORNIA EASTERN LABORATORIES • Headquarters • 4590 Patrick Henry Drive • Santa Clara, CA 95054-1817 • (408) 988-3500 • Telex 34-6393 • FAX (408) 988-0279 24-Hour Fax-On-Demand: 800-390-3232 (U.S. and Canada only) • Internet: http://WWW.CEL.COM DATA SUBJECT TO CHANGE WITHOUT NOTICE 2/24/2000