NDL5521PD

2.5 Gb/s OPTICAL FIBER COMMUNICATIONS φ50 µm InGaAs AVALANCHE PHOTO DIODE MODULE WITH MMF FEATURES • SMALL DARK CURRENT: ID = 5 nA • HIGH QUANTUM EFFICIENCY: η = 90% at λ = 1300 nm, M = 1 η = 77% at λ = 1550 nm, M = 1 • HIGH SPEED RESPONSE: fc = 2.5 GHz at M = 10 • DETECTING AREA SIZE: φ50 µm • COAXIAL MODULE WITH MULTIMODE FIBER (GI-50/125) • NDL5521P1 AND NDL5521P2 HAVE A FLANGE NDL5521P SERIES DESCRIPTION The NDL5521P Series are InGaAs avalanche photo diode modules with multimode fiber.They are designed for 2.5 Gb/s optical fiber communication systems and cover the wavelength range between 1000 and 1600 nm with high efficiency. These modules are also available with FC-PC connector and SC-PC connector. ELECTRO-OPTICAL CHARACTERISTICS (TC = 25°C) PART NUMBER PACKAGE OUTLINE SYMBOLS V(BR)R δ ID IDM Ct fC PARAMETERS AND CONDITIONS Reverse Breakdown Voltage, ID = 100 µA Temperature Coefficient of Reverse Breakdown Voltage1 Dark Current, VR = V(BR)R x 0.9 Multiplied Dark Current, M = 2 to 10 Terminal Capacitance, VR = V(BR)R x 0.9, f = 1 MHz Cut-off Frequency, M=5 M = 10 M = 30 UNITS V %/°C nA nA pF GHz 2.5 2.5 1.0 76 65 0.80 0.81 30 MIN 40 NDL5521P Series TYP 55 0.20 5 0.50 0.40 3.0 90 77 0.94 0.96 40 0.7 5 dB 30 30 5 0.75 MAX 80 η S M X F ORL Note: 1. δ = Quantum Efficiency, λ = 1300 nm, M = 1 λ = 1550 nm, M = 1 Responsivity, λ = 1300 nm, M = 1 λ = 1550 nm, M = 1 Multiplication Factor, λ = 1550 nm, IPO = 1.0 µA, VR = V (at ID = 1 µA) Excess Noise Factor, λ = 1300 nm, 1550 nm, IPO = 1.0 µA, M = 10, f = 35 MHz, B = 1 MHz Optical Return Loss V(BR)R < 25°C + ∆T°C > - V(BR)R < 25°C> ∆T°C • V(BR)R < 25°C> % A/W M California Eastern Laboratories NDL5521P SERIES ABSOLUTE MAXIMUM RATINGS1 (TC = 25°C, unless otherwise specified) SYMBOLS IF IR TC TSTG PARAMETERS Forward Current Reverse Current Operating Case Temp. Storage Temperature UNITS mA mA °C °C RATINGS 10 0.5 -40 to +85 -40 to +85 Note: 1. Operation in excess of any one of these parameters may result in permanent damage. OUTLINE DIMENSIONS (Units in mm) NDL5521P NDL5521P1 Optical Fiber GI-50/125 Length: 1 m MIN. Shrunk Tube Optical Fiber GI-50/125 Length: 1 m MIN. Shrunk Tube φ2.5 30.0 MAX φ2.5 14.0 φ6.0 - 0.1 +0.0 30.0 MAX 6.9±0.3 φ6.0- 0.1 12.5 MIN φ0.45 3 1 +0.0 6.9–0.3 4.0–0.1 3.9–0.5 2-φ2.2 12.5 MIN 6.0 - 0.1 +0.0 2 3.0±0.3 φ2.0 7.0 2 3 1 4.0 1.5 φ2.0 18.0 3 1 NDL5521P2 Optical Fiber GI-50/125 Length: 1 m MIN. Shrunk Tube LEAD CONNECTION 1. Anode (Negative) 2. Cathode (Positive) 3. Case 2 φ2.5 30.0 MAX ORDERING INFORMATION PART NUMBER NDL5521P NDL5521PC NDL5521PD NDL5521P1 NDL5521P1C NDL5521P1D NDL5521P2 NDL5521P2C NDL5521P2D AVAILABLE CONNECTOR Without Connector With FC-PC Connector With SC-PC Connector Without Connector With FC-PC Connector With SC-PC Connector Without Connector With FC-PC Connector With SC-PC Connector DESCRIPTION No Flange φ6.0- 0.1 +0.0 2.0–0.1 0.5 12.5 MIN 2-φ2.5 2 3 1 Flat Mount Flange Vertical Flange 7.0 φ2.0 12.0 16.0 NDL5521P SERIES HANDLING PRECAUTION FOR PD/APD MODULE The NEC PD/APD module has heat shrink tubing to protect the ferrule edge (*1) and the junction between the ferrule and the module body (*2). In order to avoid breaking the fiber and/or optical coupling degradation, NEC recommends the following handling precautions: 1. Do not make the fiber bend radius less than 30 mm (*3). 2. Do not bend the fiber within the 18 mm section from the module body (*4). 3. Do not stress the ferrule with a lateral force exceeding 500 g (*5). fiber 30 mm MIN (*3) (*1) 18 mm MIN (*4) ferrule (*5) (*2) module body EXCLUSIVE NORTH AMERICAN AGENT FOR RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS CALIFORNIA EASTERN LABORATORIES ¥ Headquarters ¥ 4590 Patrick Henry Drive ¥ Santa Clara, CA 95054-1817 ¥ (408) 988-3500 ¥ Telex 34-6393 ¥ FAX (408) 988-027 24-Hour Fax-On-Demand: 800-390-3232 (U.S. and Canada only) ¥ Internet: http://WWW.CEL.COM 11/14/2000 DATA SUBJECT TO CHANGE WITHOUT NOTICE