NX7303BA-CC

NEC's 1310 nm InGaAsP MQW FP LASER DIODE NX7303BA-CC IN COAXIAL PACKAGE NX7303CA-CC FOR 155 Mb/s APPLICATION FEATURES • CENTER WAVELENGTH: λC = 1310 nm • OPTICAL OUTPUT POWER: Pf = 1.0 mW • LOW THRESHOLD CURRENT: ITH = 9 mA • HIGH CUTOFF FREQUENCY: fC = 2.0 GHz • InGaAs MONITOR PIN-PD • WITH SC-UPC CONNECTOR • WIDE OPERATING TEMPERATURE RANGE: -40 to +85°C • BASED ON TELCORDIA RELIABILITY DESCRIPTION NEC's NX7303BA-CC and NX7303CA-CC are 1310 nm FabryPerot (FP) laser diode coaxial modules with single mode fiber. They have a Multiple Quantum Well (MQW) structure and a built-in InGaAs monitor photo diode. These modules are ideal as a light source for Synchronous Digital Hierarchy (SDH) systems, STM-1 and long-haul L-1.1 ITU-T recommendations. ELECTRO-OPTICAL CHARACTERISTICS (TC = -40 to +85°C, unless otherwise specified) PART NUMBER SYMBOLS Pf VOP ITH PTH IMOD ηd ∆ηd PARAMETERS AND CONDITIONS Optical Output Power from Fiber Operating Voltage, Pf = 1.0 mW Threshold Current Threshold Output Power, IF = ITH Modulation Current Differential Efficiency Pf = 1.0 mW, TC = 25°C Pf = 1.0 mW TC = +25°C UNITS mW V mA mA µW mA mA W/A W/A dB 4 2 8 5 0.030 0.018 -3 MIN NX7303BA-CC, NX7303CA-CC TYP 1.0 1.2 9 1.5 20 50 75 35 60 0.100 0.150 MAX 15 0.070 -2 Pf = 1.0 mW, TC = 25°C Pf = 1.0 mW Temperature Dependence of Differential Efficiency, ηd (@ TC °C) ∆ηd = 10 log ηd (@ 25 °C) Kink λc ∆λ/∆T σ fC tr tf Im ID Ct LINm γ Kink, Pf = Up to 1.2 mW (Refer to Definitions) Center Wavelength, Pf = 1.0 mW, RMS (-20 dB) Temperature Dependence of Center Wavelength Spectral Width, Pf = 1.0 mW, RMS (-20 dB) Cut-off Frequency, -3 dB Rise Time, 10 to 90%, Ppk = 1.0 mW, IF = ITH Fall Time, 90 to 10%, Ppk = 1.0 mW, IF = ITH Monitor Current, VR = 5 V, Pf = 1.0 mW Dark Current VR = 5 V, TC = 25 °C VR = 5 V % nm nm/°C nm GHz ns ns µA nA nA pF % dB 0.5 100 1263 1310 0.4 1.3 2.0 0.2 0.3 700 0.1 10 0.5 0.5 1200 50 500 20 ±10 1.0 ±20 1360 0.5 4.0 Applicable to Monitor PD: TC = -40 to +85 °C unless otherwise specified Terminal Capacitance, VR = 5 V, f = 1 MHz Linearity, VR = 5 V, Pf = 0.1 to 1.0 mW (Refer to Definitions) Tracking Error, Im = const. (Refer to Definitions) California Eastern Laboratories NX7303BA-CC, NX7303CA-CC ABSOLUTE MAXIMUM RATINGS1 (TC = 25°C, unless otherwise specified) SYMBOLS Pf IF VR IF VR TC TSTG TSLD RH PARAMETERS Optical Output Power from Fiber Forward Current of LD Reverse Voltage of LD Forward Current of PD Reverse Voltage of PD Operating Case Temperature Storage Temperature Lead Soldering Temperature (10 s) Relative Humidity (noncondensing) UNITS RATINGS mW mA V mA V °C °C °C % 3.0 150 2.0 10 20 -40 to +85 -40 to +85 260 85 Note: 1. Operation in excess of any one of these parameters may result in permanent damage. PARAMETER DEFINITIONS Kink : kink Pf (mW) 1.2 dPo PK dPK IF - ηd IF - Pf kink = x 100 [%] PK dPK = dPo MAX PK ≤ 1.2 (mW) |dPK| 0 (mA) IF Linearity : LINm Pf (mW) 1.0 PK PL dPL dPo 0.1 0 (mA) LINm = |dPL| x 100 [%] PL dPL = dPo MAX 0.1 < PK < 1.0 (mW) Im Tracking Error : γ Pf (mW) TC = 25°C 1.0 TC = -40 to +85C Pf Pf γ = |10 log 1.0 Im Im (mA) | [dB] 0 NX7303BA-CC, NX7303CA-CC TYPICAL PERFORMANCE CURVES (TC = -40 to +85°C, unless otherwise specified) OPTICAL OUTPUT POWER FROM FIBER vs. FORWARD CURRENT OPERATING CURRENT AND THRESHOLD CURRENT vs. CASE TEMPERATURE 100 TC = -40°C +25°C 1.0 +70°C +85°C Optical Output Power from Fiber, Pf (mW) 1.5 IOP (@Pf = 1.0 mW) Threshold Current, ITH (mA) Operating Current, IOP (mA) 50 30 20 Ith 10 5 3 2 1 -60 0.5 0 0 50 100 150 -40 -20 0 20 40 60 80 100 Forward Current, IF (mA) Case Temperature, TC (°C) TEMPERATURE DEPENDENCE OF CENTER WAVELENGTH 1360 0.10 TEMPERATURE DEPENDENCE OF DIFFERENTIAL EFFICIENCY Differential Efficiency, ηd (W/A) Center Wavelength, λc (nm) 1340 0.08 1320 0.06 1300 0.04 1280 0.02 1260 -60 -40 -20 0 20 40 60 80 100 0 -60 -40 -20 0 20 40 60 80 100 Case Temperature, TC (°C) Case Temperature, TC (°C) OPTICAL OUTPUT POWER FROM FIBER vs. MONITOR CURRENT 1.5 Optical Output Power From Fiber, Pf (mW) 1320 LONGITUDINAL MODE Relative Intensity 1.0 0.5 1300 1310 0 0 0.5 1.0 1.5 Wavelength, λ (nm) Monitor Current, Im (mA) NX7303BA-CC, NX7303CA-CC TYPICAL PERFORMANCE CURVES (TC = -40 to +85°C, unless otherwise specified) FORWARD CURRENT vs. FORWARD VOLTAGE 50 ORDERING INFORMATION PART NUMBER AVAILABLE CONNECTOR NX7303BA-CC NX7303CA-CC With SC-UPC Connector With SC-UPC Connector FLANGE TYPE Flat Mount Flange Vertical Mount Flange Forward Current, IF (mA) 40 OPTICAL FIBER CHARACTERISTICS 30 PARAMETER Mode Field Diameter UNITS SPECIFICATION µm µm % % mm nm mm mm 9.5±1 125±2 2 1.6 0.9±0.1 1100 to 1270 30 500±50 20 Cladding Diameter Maximum Cladding Noncircularity Maximum Core/Cladding Concentricity Outer Diameter Cut-off Wavelength 0 1 2 10 0 Minimum Fiber Bending Radius Fiber Length Flammability Forward Voltage, VF (V) UL 1581 VW-1 35±2 mm 8.99±0.5 mm SC-UPC Connector Fiber Length: 500±50 mm OUTLINE DIMENSIONS (Units in mm) NX7303BA-CC Optical Fiber (SMF) Length: 0.5 m With SC Connector ø7.0±0.2 ø0.9 Optical Fiber (SMF) Length: 0.5 m With SC Connector NX7303CA-CC ø0.9 ø7.0±0.2 8.0±0.3 3.2 4.0±0.2 2.2 ø2.2 25.5±1.0 0.5±0.2 8.0±0.3 5.1 ø0.45±0.05 16.0 26.1±1.0 18.3±1.0 15.0 6.0 6.0 ø0.45±0.05 1.2±0.2 20.0±1.0 PIN CONNECTIONS 12.7±0.2 17.0±0.2 P.C.D. = ø2.0 PD 4 1 LD CASE 7.2±0.3 3.7±0.3 P.C.D. = ø2.0 4–R1.25±0.2 3 2 PIN CONNECTIONS 2 3 2–ø2.5 4 1 PD 7.0±0.2 3 4 LD 2 1 CASE 1.0±0.1 8.5±0.2 12.0±0.15 20.0±1.0 0.5 02/27/2003 A Business Partner of NEC Compound Semiconductor Devices, Ltd.