NX7661JB-BC

NEC's 1625 nm InGaAsP MQW FP NX7661JB-BC PULSED LASER DIODE IN DIP PACKAGE FOR OTDR APPLICATION (120 mW MIN) FEATURES • HIGH OUTPUT POWER: Pf = 120 mW MIN at IFP = 1000 mA, Pulse width (PW) = 10 ms, Duty = 1% • LONG WAVELENGTH: λC = 1625 nm • INTERNAL THERMOELECTRIC COOLER, THERMISTOR • HERMETICALLY SEALED 14 PIN DUAL-IN-LINE PACKAGE • SINGLE MODE FIBER PIGTAIL DESCRIPTION NEC's NX7661JB-BC is a 1625 nm developed strained Multiple Quantum Well (st-MQW) structure pulse laser diode DIP module with single mode fiber and internal thermoelectric cooler. It is designed for light sources of optical measurement equipment (OTDR). ELECTRO-OPTICAL CHARACTERISTICS (TLD = 25°C, TC = -20 to +65°C, unless otherwise specified) PART NUMBER SYMBOLS VFP ITH Pf λC σ tr tf PARAMETERS AND CONDITIONS Forward Voltage, CW, IF = 30 mA Threshold Current, CW Optical Output Power from Fiber, IFP = 1000 mA, PW = 10 µs, Duty = 1 % Center Wavelength, RMS, IFP = 1000 mA, PW = 10 µs, Duty = 1 % Spectral Width, RMS, IFP = 1000 mA, PW = 10 µs, Duty = 1 % Rise Time, 10-90% Fall Time, 90-10% UNITS V mA mW nm 120 1615 1625 1635 30 MIN NX7661JB-BC TYP MAX 4.0 70 nm ns ns 7.0 15.0 2.0 2.0 ELECTRO-OPTICAL CHARACTERISTICS APPLICABLE TO THERMISTOR AND TEC: (TLD = 25°C, TC = -20 to +65°C, unless otherwise specified) PART NUMBER SYMBOLS R B IC VC ∆T1 PARAMETERS AND CONDITIONS Thermistor Resistance, TLD = 25°C B Constant Cooler Current, ∆T = 40 K Cooler Voltage, ∆T = 40 K Cooling Capacity, IC = 0.8 A UNITS kΩ K A V K 40 MIN 9.5 3350 NX7661JB-BC TYP 10.0 3450 0.6 1.1 MAX 10.5 3550 0.8 1.5 Note: 1. ∆T = | TC - TLD |. California Eastern Laboratories NX7661JB-BC ABSOLUTE MAXIMUM RATINGS1 (TC = 25°C, unless otherwise specified) SYMBOLS IFP VR IC VC It Vt TC TSTG TSLD PARAMETERS Pulsed Forward Current2 Reverse Voltage Cooler Current Cooler Voltage Thermistor Current Thermistor Voltage Operating Case Temperature Storage Temperature Lead Soldering Temperature (10 sec) UNITS A V A V mA V °C °C °C RATINGS 1.2 2.0 1.0 2.0 0.5 12.0 -20 to +65 -40 to +70 260 *Note: Please refer to the last page of this data sheet. "Compliance with EU Directives" for Pb-Free RoHS Compliance Information. ORDERING INFORMATION PART NUMBER NX7661JB-BC-AZ* DESCRIPTION With FC-PC Connector Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. Pulse Condition: Pulse Width (PW) = 10 µs, Duty = 1 %. TYPICAL PERFORMANCE CURVES (TC = 25°C unless otherwise specified) OPTICAL OUTPUT POWER FROM FIBER vs. PULSED FORWARD CURRENT 300 PW = 10 µs, Duty = 1% SPECTRUM PW = 10 µs Duty = 1% Optical Output from Fiber, Pf (mW) 200 100 0 200 400 600 800 1000 1200 1580 1630 1680 Pulsed Forward Current, IFP (mA) Wavelength λ (nm) THERMISTOR RESISTANCE vs. CASE TEMPERATURE 50 Thermistor Resistance, R (kΩ) 30 20 10 5 3 2 1 0 25 50 75 Case Temperature, TC (°C) NX7661JB-BC OUTLINE DIMENSIONS (Units in mm) 20.8 21.3 5.1 1.0 4.0 ø3.2 BOTTOM VIEW #8 12.7 25.4 7.62 19.1 #14 3.0 LD Thermistor Case φ 5.0 φ 3.0 φ 0.9 #7 Optical Fiber SM - 9/125 Length: 1 m TYP 8.1 #1 11.66 10.2 5.6 1.0 PIN CONNECTIONS PIN No. 1 2 3 4 5 6 7 FUNCTION COOLER ANODE NC NC NC LASER ANODE, CASE GROUND NC NC PIN No. 8 9 10 11 12 13 14 FUNCTION NC LASER CATHODE LASER ANODE, CASE GROUND THERMISTOR THERMISTOR NC COOLER CATHODE 2.54 Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale. 6.5 φ 0.45 Cooler 03/03/2003 A Business Partner of NEC Compound Semiconductor Devices, Ltd. 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Lead (Pb) Mercury Cadmium Hexavalent Chromium PBB PBDE Concentration Limit per RoHS (values are not yet fixed) < 1000 PPM < 1000 PPM < 100 PPM < 1000 PPM < 1000 PPM < 1000 PPM Concentration contained in CEL devices -A Not Detected Not Detected Not Detected Not Detected Not Detected Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability. 3-180