NX8341UH-AZ

LASER DIODE NX8341 Series 1 310 nm AlGaInAs MQW-DFB LASER DIODE FOR 10 Gb/s APPLICATION DESCRIPTION The NX8341 Series is a 1 310 nm Multiple Quantum Well (MQW) structured Distributed Feed-Back (DFB) laser diode TOSA (transmitter optical subassembly) with InGaAs monitor PIN-PD in a receptacle type package designed for XENPAK/XPAK/X2/XFP transceiver. APPLICATIONS • 10 G BASE-LW/LR • 10 G Fiber Channel FEATURES • Internal optical isolator • Optical output power • Low threshold current • Wide operating temperature range • InGaAs monitor PIN-PD Pf = −2 dBm lth = 8 mA TYP. @ TC = 25°C TC = −5 to +85°C Document No. PL10525EJ02V0DS (2nd edition) Date Published September 2006 NS CP(K) The mark shows major revised points. The revised points can be easily searched by copying an "" in the PDF file and specifying it in the "Find what:" field. NX8341 Series PACKAGE DIMENSIONS (UNIT : mm) NX8341TB BOTTOM VIEW φ 5.0 φ 2.99 φ 2.92 4.65 2.8 5.6 1.75 (4.05) 5.15 OPTICAL REFERENCE PLANE 0.55 φ 3.5±0.1 φ 3.5±0.1 1.35 8.7 1.3 18.17 φ 5.2±0.05 φ 5.2±0.05 3±0.1 0.28±0.1 5.55 2–1.6 GND surface 2– φ 0.5 2–3.77 GND 1.0±0.2 Signal surface GND 18– φ 0.2 6–R0.15 φ 5.6±0.05 0.13 5–0.79 6–0.45 5.7 1.5 Remarks1. Receptacle is electrically isolated from CAN. 2. Characteristic impedance of flexible printed circuit is 25 Ω. 2 Data Sheet PL10525EJ02V0DS PD Cathode GND LD Cathode LD Anode GND NC NX8341 Series NX8341TJ BOTTOM VIEW φ 4.75±0.1 φ 3.4±0.03 φ 2.92±0.05 4.045±0.05 4.65 2.8 5.6 6.99±0.2 0.55±0.05 12.55 TYP. 1.1±0.05 A OPTICAL REFERENCE PLANE φ 5.2±0.05 φ 5.2±0.05 3±0.1 5.55 18.17 ⊥ 0.03 A 0.28±0.1 GND surface 2–1.6 1.0±0.2 Signal surface 2– φ 0.5 2–3.77 GND φ 5.6±0.05 GND 18– φ 0.2 6–R0.15 0.13 5–0.79 6–0.45 5.7 1.5 Remark Characteristic impedance of flexible printed circuit is 25 Ω. PD Cathode GND LD Cathode LD Anode GND NC Data Sheet PL10525EJ02V0DS 3 NX8341 Series NX8341TL BOTTOM VIEW φ 7.4±0.1 5.6 φ 4.64±0.05 2.8 6.94±0.05 11.6±0.2 0.55±0.05 18.17 φ 4.7±0.05 17.15 TYP. OPTICAL REFERENCE PLANE 4.65 0.28±0.1 2–1.6 3±0.1 φ 5.2±0.05 5.55 2– φ 0.5 2–3.77 φ 5.2±0.05 GND surface 1.0±0.2 0.13 GND 1.5 GND 18– φ 0.2 6–R0.15 Signal surface 5–0.79 6–0.45 5.7 PD Cathode GND LD Cathode LD Anode GND NC φ 5.6±0.05 Remark Characteristic impedance of flexible printed circuit is 25 Ω. 4 Data Sheet PL10525EJ02V0DS NX8341 Series NX8341UB φ 5.0 φ 2.99 φ 2.92 BOTTOM VIEW 1 2 1.75 (4.05) 5.15 543 OPTICAL REFERENCE PLANE 1.3 φ 3.5±0.1 0.55 φ 3.5±0.1 1.35 8.7 PIN CONNECTIONS 1 PD 2 φ 5.2±0.05 φ 5.2±0.05 3±0.1 5.55 5 10 Ω G 4 LD 3 10 Ω 5– φ 0.3±0.05 φ 2.7±0.2 P.C.D φ 5.6±0.05 Remark Receptacle is electrically isolated from CAN. 14.5±0.6 1.0±0.2 Data Sheet PL10525EJ02V0DS 5 NX8341 Series NX8341UH 4.75±0.1 φ 3.4±0.03 BOTTOM VIEW φ 2.92±0.05 4.045±0.05 6.99±0.2 1.1±0.05 1 OPTICAL REFERENCE PLANE ⊥ 0.03 A 2 3 4 5 12.55 TYP. A 0.55±0.05 PIN CONNECTIONS 3.0±0.1 5.55 φ 5.2±0.05 φ 5.2±0.05 5 1 L 2 LD PD 3 G 20 Ω 4 14.5±0.6 1.0±0.2 5– φ 0.3±0.05 φ 2.7±0.2 P.C.D φ 5.6±0.05 6 Data Sheet PL10525EJ02V0DS NX8341 Series NX8341UJ 4.75±0.1 φ 3.4±0.03 φ 2.92±0.05 4.045±0.05 BOTTOM VIEW 1 2 1.1±0.05 6.99±0.2 543 OPTICAL REFERENCE PLANE ⊥ 0.03 A 12.55 TYP. A 3.0±0.1 0.55±0.05 PIN CONNECTIONS 1 PD 2 5.55 φ 5.2±0.05 φ 5.2±0.05 5 G 3 10 Ω 14.5±0.6 1.0±0.2 5– φ 0.3±0.05 10 Ω 4 LD φ 2.7±0.2 P.C.D φ 5.6±0.05 Data Sheet PL10525EJ02V0DS 7 NX8341 Series NX8341UL φ 7.4±0.1 φ 4.64±0.05 BOTTOM VIEW 1 2 6.94±0.05 543 11.6±0.2 0.55±0.05 φ 4.7±0.05 17.15 TYP. OPTICAL REFERENCE PLANE PIN CONNECTIONS 1 PD 2 3.0±0.1 φ 5.2±0.05 φ 5.2±0.05 5 G 4 LD 3 10 Ω 5.55 10 Ω 1.0±0.2 5– φ 0.3±0.05 φ 2.7±0.2 P.C.D φ 5.6±0.05 8 Data Sheet PL10525EJ02V0DS 14.5±0.6 NX8341 Series NX8341UN BOTTOM VIEW φ 7.4±0.1 φ 4.64±0.05 1 5 2 3 4 6.94±0.05 11.6±0.2 0.55±0.05 φ 4.7±0.05 17.15 TYP. OPTICAL REFERENCE PLANE PIN CONNECTIONS 1 L 5 20 Ω 4 G LD 2 PD 3 φ 5.2±0.05 φ 5.2±0.05 3.0±0.1 5.55 14.5±0.6 1.0±0.2 5– φ 0.3±0.05 φ 2.7±0.2 P.C.D φ 5.6±0.05 Data Sheet PL10525EJ02V0DS 9 NX8341 Series ORDERING INFORMATION Part Number NX8341TB-AZ* NX8341TJ-AZ* NX8341TL-AZ* NX8341UB-AZ* NX8341UH-AZ* NX8341UJ-AZ* NX8341UL-AZ* NX8341UN-AZ* Receptacle Type LC, Electrically isolated LC SC LC, Electrically isolated LC LC SC SC Note Differential input with flexible PCB Differential input with flexible PCB Differential input with flexible PCB Differential input, 5-pin Single-ended, 5-pin Differential input, 5-pin Differential input, 5-pin Single-ended, 5-pin *NOTE: Please refer to the last page of this data sheet, “Compliance with EU Directives” for Pb-Free RoHS Compliance Information. 10 Data Sheet PL10525EJ02V0DS NX8341 Series ABSOLUTE MAXIMUM RATINGS Parameter Storage Temperature Operating Case Temperature Forward Current of LD Reverse Voltage of LD Forward Current of PD Reverse Voltage of PD Lead Soldering Temperature Optical Output Power Symbol Tstg TC IFLD VRLD IFPD VRPD Tsld Pf Ratings −40 to +85 −5 to +85 120 2 10 20 350 (3.5 sec.) 5 Unit °C °C mA V mA V °C mW Data Sheet PL10525EJ02V0DS 11 NX8341 Series ELECTRO-OPTICAL CHARACTERISTICS (TC = −5 to +85°C, BOL, unless otherw ise specified) Parameter Mean Optical Output Power Peak Emission Wavelength Side Mode Suppression Ratio Threshold Current Symbol Pf λp SMSR Ith CW, Pf = −2 dBm CW, Pf = −2 dBm CW, TC = 25°C CW Differential Efficiency 2 0.02 0.005 0.025 1 290 30 8 20 40 0.04 0.05 2 *1 90 700 5 50 *1 *1 *1 4 − 1.0 25 With master pigtail − 1.0 1.0 30 40 5 1.0 50 50 ps ps dB dB Ω dB V W/A Conditions MIN. TYP. −2 1 330 MAX. Unit dBm nm dB mA ηd CW, Pf = −2 dBm, TC = 25°C CW, Pf = −2 dBm Operation Voltage Monitor Current Vop Im ID CW, Pf = −2 dBm Pf = −2 dBm, VR = 1.5 V VR = 1.5 V, TC = 25°C VR = 1.5 V µA nA Monitor Dark Current Rise Time Fall Time Extinction Ratio Tracking Error *2 tr tf Ex γ Zin CR 20-80% 20-80% 10 GbE, 10 G FC Input Impedance Connector Repeatability 31 *1 9.95/10.3/10.5 Gb/s, PRBS 2 −1, NRZ, Duty Cycle = 50% *2 Tracking Error: γ Pf (mW) TC = 25˚C Pf @ 25˚C TC = –5 to +85˚C Pf γ = 10 log Pf Pf @ 25˚C [dB] 0 Im Im (mA) 12 Data Sheet PL10525EJ02V0DS 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Lead (Pb) Mercury Cadmium Hexavalent Chromium PBB PBDE Concentration Limit per RoHS (values are not yet fixed) < 1000 PPM < 1000 PPM < 100 PPM < 1000 PPM < 1000 PPM < 1000 PPM Concentration contained in CEL devices -A Not Detected Not Detected Not Detected Not Detected Not Detected Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.