PS2501-4

PHOTOCOUPLER PS2501-1,-2,-4, PS2501L-1,-2,-4 HIGH ISOLATION VOLTAGE SINGLE TRANSISTOR TYPE MULTI PHOTOCOUPLER SERIES −NEPOC Series− DESCRIPTION The PS2501-1, -2, -4 and PS2501L-1, -2, -4 are optically coupled isolators containing a GaAs light emitting diode and an NPN silicon phototransistor. The PS2501-1, -2, -4 are in a plastic DIP (Dual In-line Package) and the PS2501L-1, -2, -4 are lead bending type (Gull-wing) for surface mount. FEATURES • High isolation voltage (BV = 5 000 Vr.m.s.) • High collector to emitter voltage (VCEO = 80 V) • High-speed switching (tr = 3 µs TYP., tf = 5 µs TYP.) • Ordering number of tape product: PS2501L-1-E3, E4, F3, F4, PS2501L-2-E3, E4 • Safety standards • UL approved: File No. E72422 1 2 PIN CONNECTION (Top View) PS2501-1, PS2501L-1 4 3 1. Anode 2. Cathode 3. Emitter 4. Collector APPLICATIONS • Power supply • Telephone/FAX. • FA/OA equipment • Programmable logic controller PS2501-2, PS2501L-2 8 7 6 5 1, 3. Anode 2, 4. Cathode 5, 7. Emitter 6, 8. Collector 1 2 3 4 PS2501-4, PS2501L-4 16 15 14 13 12 11 10 9 1 2345678 1, 3, 5, 7. Anode 2, 4, 6, 8. Cathode 9, 11, 13, 15. Emitter 10, 12, 14, 16. Collector Document No. PN10225EJ02V0DS (2nd edition) Date Published April 2005 CP(K) The mark shows major revised points. PS2501-1,-2,-4, PS2501L-1,-2,-4 PACKAGE DIMENSIONS (UNIT : mm) DIP Type (New package) PS2501-1 4.6±0.35 19.8±0.5 PS2501-4 6.5±0.5 7.62 6.5±0.5 7.62 3.2±0.4 4.15±0.4 3.2±0.4 4.15±0.4 3.5±0.3 1.25±0.15 0 to 15˚ +0.1 0.25 –0.05 0.50±0.10 0.25 M 2.54 3.5±0.3 1.25±0.15 2.54 0.50±0.10 0.25 M 0 to 15˚ +0.1 0.25 –0.05 Caution New package 1-ch, 4-ch only DIP Type PS2501-1 4.6±0.5 9.7±0.5 PS2501-2 6.5±0.5 6.5±0.5 7.62 3.3±0.5 4.15±0.4 3.3±0.5 4.15±0.4 3.5±0.3 3.5±0.3 7.62 1.25±0.15 0 to 15˚ +0.1 0.25 –0.05 0.50±0.10 0.25 M 2.54 1.25±0.15 2.54 0.50±0.10 0.25 M 0 to 15˚ +0.1 0.25 –0.05 PS2501-4 19.8±0.5 6.5±0.5 7.62 3.3±0.5 4.15±0.4 3.5±0.3 1.25±0.15 2.54 0.50±0.10 0.25 M 0 to 15˚ +0.1 0.25 –0.05 2 Data Sheet PN10225EJ02V0DS PS2501-1,-2,-4, PS2501L-1,-2,-4 Lead Bending Type (New package) PS2501L-1 4.6±0.35 19.8±0.5 PS2501L-4 6.5±0.5 0.25 +0.1 –0.05 6.5±0.5 0.1 +0.1 –0.05 0.25 +0.1 –0.05 3.5±0.3 3.5±0.3 1.25±0.15 0.25 M 2.54 0.15 0.9±0.25 9.60±0.4 1.25±0.15 0.25 M 2.54 0.15 0.9±0.25 9.60±0.4 Caution New package 1-ch, 4-ch only Lead Bending Type PS2501L-1 4.6±0.5 9.7±0.5 PS2501L-2 6.5±0.5 6.5±0.5 0.25 +0.1 –0.05 0.25 +0.1 –0.05 0.1 +0.1 –0.05 3.5±0.3 3.5±0.3 1.25±0.15 0.25 M 2.54 0.15 0.9±0.25 9.60±0.4 1.25±0.15 0.25 M 2.54 0.15 0.9±0.25 9.60±0.4 PS2501L-4 19.8±0.5 6.5±0.5 0.25 +0.1 –0.05 3.5±0.3 1.25±0.15 0.25 M 2.54 0.15 0.9±0.25 9.60±0.4 0.1 +0.1 –0.05 0.1 +0.1 –0.05 0.1 +0.1 –0.05 Data Sheet PN10225EJ02V0DS 3 PS2501-1,-2,-4, PS2501L-1,-2,-4 MARKING EXAMPLE PS2501-1 No. 1 pin Mark No. 1 pin Mark PS2501-2, -4 2501 MD003 Assembly Lot PS2501-2 MD003 Country Assembled Type Number Assembly Lot MD 0 03 MD 0 03 Week Assembled Year Assembled (Last 1 Digit) In-house Code CTR Rank Code Week Assembled Year Assembled (Last 1 Digit) In-house Code CTR Rank Code Package Standard PKG New PKG Made in Japan Made in Taiwan Package Standard PKG New PKG *1 PS2501-4 only Made in Japan Made in Taiwan D E *1 D E F H F 4 Data Sheet PN10225EJ02V0DS PS2501-1,-2,-4, PS2501L-1,-2,-4 ORDERING INFORMATION Part Number Order Number Solder Plating Specification PS2501-1 PS2501L-1 PS2501L-1-E3 PS2501L-1-E4 PS2501L-1-F3 PS2501L-1-F4 PS2501-2 PS2501L-2 PS2501L-2-E3 PS2501L-2-E4 PS2501-4 PS2501L-4 PS2501-1 PS2501L-1 PS2501L-1-E3 PS2501L-1-E4 PS2501L-1-F3 PS2501L-1-F4 PS2501-2 PS2501L-2 PS2501L-2-E3 PS2501L-2-E4 PS2501-4 PS2501L-4 PS2501-1 PS2501L-1 PS2501L-1-E3 PS2501L-1-E4 PS2501L-1-F3 PS2501L-1-F4 PS2501-2 PS2501L-2 PS2501L-2-E3 PS2501L-2-E4 PS2501-4 PS2501L-4 PS2501-1-A PS2501L-1-A PS2501L-1-E3-A PS2501L-1-E4-A PS2501L-1-F3-A PS2501L-1-F4-A PS2501-2-A PS2501L-2-A PS2501L-2-E3-A PS2501L-2-E4-A PS2501-4-A PS2501L-4-A Magazine case 20 pcs PS2501-4 Embossed Tape 1 000 pcs/reel Magazine case 45 pcs PS2501-2 Embossed Tape 2 000 pcs/reel Embossed Tape 1 000 pcs/reel Pb-Free Magazine case 100 pcs PS2501-1 Magazine case 20 pcs PS2501-4 Embossed Tape 1 000 pcs/reel Magazine case 45 pcs PS2501-2 Embossed Tape 2 000 pcs/reel Solder c o n t a i n s lead Embossed Tape 1 000 pcs/reel Magazine case 100 pcs Packing Style Safety Standard Approval Standard products (UL Approved) Application Part Number PS2501-1 *1 *1 For the application of the Safety Standard, following part number should be used. Data Sheet PN10225EJ02V0DS 5 PS2501-1,-2,-4, PS2501L-1,-2,-4 ABSOLUTE MAXIMUM RATINGS (Unless otherw ise specified, TA = 25°C) Ratings Parameter Symbol PS2501-1, PS2501L-1 Diode Reverse Voltage Forward Current (DC) Power Dissipation Derating Power Dissipation Peak Forward Current Transistor *1 PS2501-2,-4 PS2501L-2,-4 6 80 Unit VR IF V mA 1.2 120 mW/°C mW/ch A V V mA/ch 1.2 120 mW/°C mW/ch Vr.m.s. °C °C ∆PD/°C PD IFP VCEO VECO IC 1.5 150 1 80 7 50 1.5 150 5 000 −55 to +100 −55 to +150 Collector to Emitter Voltage Emitter to Collector Voltage Collector Current Power Dissipation Derating Power Dissipation ∆PC/°C PC BV TA Tstg Isolation Voltage *2 Operating Ambient Temperature Storage Temperature *1 PW = 100 µs, Duty Cycle = 1% *2 AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output. Pins 1-2 shorted together, 3-4 shorted together (PS2501-1, PS2501L-1). Pins 1-4 shorted together, 5-8 shorted together (PS2501-2, PS2501L-2). Pins 1-8 shorted together, 9-16 shorted together (PS2501-4, PS2501L-4). 6 Data Sheet PN10225EJ02V0DS PS2501-1,-2,-4, PS2501L-1,-2,-4 ELECTRICAL CHARACTERISTICS (TA = 25°C) Parameter Diode Forward Voltage Reverse Current Terminal Capacitance Transistor Collector to Emitter Dark Current Coupled Current Transfer Ratio (IC/IF) *1 Symbol VF IR Ct ICEO IF = 10 mA VR = 5 V Conditions MIN. TYP. 1.17 MAX. 1.4 5 Unit V µA pF V = 0 V, f = 1.0 MHz VCE = 80 V, IF = 0 mA 50 100 nA CTR IF = 5 mA, VCE = 5 V 80 300 600 % Collector Saturation Voltage Isolation Resistance Isolation Capacitance Rise Time Fall Time *2 VCE(sat) IF = 10 mA, IC = 2 mA 11 0.3 V Ω RI-O CI-O tr tf VI-O = 1.0 kVDC V = 0 V, f = 1.0 MHz VCC = 10 V, IC = 2 mA, RL = 100 Ω 10 0.5 3 5 pF µs *2 *1 CTR rank ( * : only PS2501-1, PS2501L-1) K* : L* : M* : D* : H* : W* : Q* : N: 300 to 600 (%) 200 to 400 (%) 80 to 240 (%) 100 to 300 (%) 80 to 160 (%) 130 to 260 (%) 100 to 200 (%) 80 to 600 (%) *2 Test circuit for switching time Pulse Input IF VCC PW = 100 µs Duty Cycle = 1/10 50 Ω VOUT RL = 100 Ω Data Sheet PN10225EJ02V0DS 7 PS2501-1,-2,-4, PS2501L-1,-2,-4 TYPICAL CHARACTERISTICS (Unless otherw ise specified, TA = 25°C) DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE Transistor Power Dissipation PC (mW) TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE 150 150 Diode Power Dissipation PD (mW) PS2501-1 PS2501L-1 100 PS2501-2 PS2501L-2 PS2501-4 PS2501L-4 50 1.2 mW/˚C 1.5 mW/˚C 100 PS2501-2 PS2501L-2 PS2501-4 PS2501L-4 50 PS2501-1 PS2501L-1 1.5 mW/˚C 1.2 mW/˚C 0 25 50 75 100 125 150 0 25 50 75 100 125 150 Ambient Temperature TA (˚C) Ambient Temperature TA (˚C) FORWARD CURRENT vs. FORWARD VOLTAGE 100 50 Forward Current IF (mA) COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE 70 Collector Current IC (mA) TA = +100˚C +60˚C +25˚C 60 50 40 50 mA 20 10 5 0˚C –25˚C –50˚C 1 0.5 30 20 10 mA A m 10 IF = 5 mA 0.1 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 0 2 4 6 8 10 Forward Voltage VF (V) Collector to Emitter Voltage VCE (V) COLLECTOR TO EMITTER DARK CURRENT vs. AMBIENT TEMPERATURE Collector to Emitter Dark Current ICEO (nA) COLLECTOR CURRENT vs. COLLECTOR SATURATION VOLTAGE 40 50 mA 20 mA 10 mA 10 000 Collector Current IC (mA) 1 000 VCE = 80 V 40 V 24 V 10 V 5V 10 5 5 mA 2 mA 100 1 0.5 IF = 1 mA 10 1 – 50 –25 0 25 50 75 100 0.1 0 0.2 0.4 0.6 0.8 1.0 Ambient Temperature TA (˚C) Collector Saturation Voltage VCE(sat) (V) Remark The graphs indicate nominal characteristics. Data Sheet PN10225EJ02V0DS 8 PS2501-1,-2,-4, PS2501L-1,-2,-4 NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE Normalized Current Transfer Ratio CTR CURRENT TRANSFER RATIO vs. FORWARD CURRENT 450 VCE = 5 V Current Transfer Ratio CTR (%) 1.2 1.0 0.8 0.6 0.4 0.2 0 Normalized to 1.0 at TA = 25˚C, IF = 5 mA, VCE = 5 V 400 350 300 250 200 150 100 50 0 0.05 0.1 0.5 1 5 10 50 Sample A B C D –50 –25 0 25 50 75 100 Ambient Temperature TA (˚C) Forward Current IF (mA) SWITCHING TIME vs. LOAD RESISTANCE 50 IC = 2 mA, VCC = 10 V, CTR = 290% Switching Time t ( µ s) SWITCHING TIME vs. LOAD RESISTANCE 1 000 IF = 5 mA, VCC = 5 V, CTR = 290% Switching Time t ( µ s) tf tr tf 10 td ts 100 ts 1 10 tr 0.1 10 50 100 500 1 k 5 k 10 k 1 100 td 500 1 k 5 k 10 k 50 k 100 k Load Resistance RL (Ω) Load Resistance RL (Ω) FREQUENCY RESPONSE IF = 5 mA, VCE = 5 V CTR (Relative Value) LONG TERM CTR DEGRADATION 1.2 IF = 5 mA 1.0 0.8 TA = 25˚C 0.6 0.4 0.2 TA = 60˚C 0 Normalized Gain GV –5 –10 –15 –20 300 Ω 100 Ω RL = 1 kΩ 0.5 1 2 5 10 20 50 100 200 500 0 102 103 Time (Hr) 104 105 Frequency f (kHz) Remark The graphs indicate nominal characteristics. Data Sheet PN10225EJ02V0DS 9 PS2501-1,-2,-4, PS2501L-1,-2,-4 TAPING SPECIFICATIONS (UNIT : mm) Outline and Dimensions (Tape) 2.0±0.1 4.0±0.1 1.75±0.1 φ 1.5 +0.1 –0 4.5 MAX. 16.0±0.3 7.5±0.1 1.55±0.1 8.0±0.1 10.3±0.1 5.3±0.1 4.0±0.1 0.4 Tape Direction PS2501L-1-E3 PS2501L-1-E4 Outline and Dimensions (Reel) 2.0±0.5 2.0±0.5 φ 13.0±0.2 R 1.0 φ 21.0±0.8 φ 80.0±1.0 φ 254±2.0 17.5±1.0 21.5±1.0 Packing: 1 000 pcs/reel 15.9 to 19.4 Outer edge of flange 10 Data Sheet PN10225EJ02V0DS PS2501-1,-2,-4, PS2501L-1,-2,-4 Outline and Dimensions (Tape) 2.0±0.1 4.0±0.1 1.75±0.1 φ 1.5 +0.1 –0 4.5 MAX. 16.0±0.3 7.5±0.1 1.55±0.1 8.0±0.1 10.3±0.1 5.3±0.1 4.0±0.1 0.4 Tape Direction PS2501L-1-F3 PS2501L-1-F4 Outline and Dimensions (Reel) 2.0±0.5 2.0±0.5 φ 13.0±0.2 φ 330±2.0 R 1.0 φ 21.0±0.8 φ 100±1.0 17.5±1.0 21.5±1.0 Packing: 2 000 pcs/reel 15.9 to 19.4 Outer edge of flange Data Sheet PN10225EJ02V0DS 11 PS2501-1,-2,-4, PS2501L-1,-2,-4 Outline and Dimensions (Tape) 2.0±0.1 4.0±0.1 1.75±0.1 1.5 +0.1 –0 4.5 MAX. 16.0±0.3 7.5±0.1 10.3±0.1 1.55±0.1 12.0±0.1 10.4±0.1 0.3 4.0±0.1 Tape Direction PS2501L-2-E3 PS2501L-2-E4 Outline and Dimensions (Reel) 2.0±0.5 2.0±0.5 φ 13.0±0.2 φ 330±2.0 R 1.0 φ 21.0±0.8 φ 100±1.0 17.5±1.0 21.5±1.0 Packing: 1 000 pcs/reel 15.9 to 19.4 Outer edge of flange 12 Data Sheet PN10225EJ02V0DS PS2501-1,-2,-4, PS2501L-1,-2,-4 NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering • Peak reflow temperature • Time of peak reflow temperature • Time of temperature higher than 220°C • Time to preheat temperature from 120 to 180°C • Number of reflows • Flux 260°C or below (package surface temperature) 10 seconds or less 60 seconds or less 120±30 s Three Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Recommended Temperature Profile of Infrared Reflow Package Surface Temperature T (˚C) (heating) to 10 s 260˚C MAX. 220˚C to 60 s 180˚C 120˚C 120±30 s (preheating) Time (s) (2) Wave soldering • Temperature • Time • Preheating conditions • Number of times • Flux 260°C or below (molten solder temperature) 10 seconds or less 120°C or below (package surface temperature) One (Allowed to be dipped in solder including plastic mold portion.) Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Soldering by soldering iron • Peak temperature (lead part temperature) • Time (each pins) • Flux 350°C or below 3 seconds or less Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead. (b) Please be sure that the temperature of the package would not be heated over 100°C. Data Sheet PN10225EJ02V0DS 13 PS2501-1,-2,-4, PS2501L-1,-2,-4 (4) Cautions • Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between collector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings. USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity. 14 Data Sheet PN10225EJ02V0DS 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Lead (Pb) Mercury Cadmium Hexavalent Chromium PBB PBDE Concentration Limit per RoHS (values are not yet fixed) < 1000 PPM < 1000 PPM < 100 PPM < 1000 PPM < 1000 PPM < 1000 PPM Concentration contained in CEL devices -A Not Detected Not Detected Not Detected Not Detected Not Detected Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.