PS2501L-4

PHOTOCOUPLER PS2501-1,-4,PS2501L-1,-4 HIGH ISOLATION VOLTAGE SINGLE TRANSISTOR TYPE MULTI PHOTOCOUPLER SERIES NEPOC Series DESCRIPTION The PS2501-1, -4 and PS2501L-1, -4 are optically coupled isolators containing a GaAs light emitting diode and an NPN silicon phototransistor. The PS2501-1, -4 are in a plastic DIP (Dual In-line Package) and the PS2501L-1, -4 are lead bending type (Gullwing) for surface mount. FEATURES PIN CONNECTION (Top View) • High isolation voltage (BV = 5 000 Vr.m.s.) • High collector to emitter voltage (VCEO = 80 V) PS2501-1, PS2501L-1 • High-speed switching (tr = 3 s TYP., tf = 5 s TYP.) 4 3 • Ordering number of tape product: PS2501L-1-F3: 2 000 pcs/reel 1. Anode 2. Cathode 3. Emitter 4. Collector • Safety standards • UL approved: No. E72422 1 2 PS2501-4, PS2501L-4 APPLICATIONS 16 15 14 13 12 11 10 9 • Power supply • Telephone/FAX. • FA/OA equipment 1 • Programmable logic controller 2 3 4 5 6 7 8 1, 3, 5, 7. Anode 2, 4, 6, 8. Cathode 9, 11, 13, 15. Emitter 10, 12, 14, 16. Collector Document No. PN10225EJ05V0DS (5th edition) Date Published February 2010 NS The mark shows major revised points. The revised points can be easily searched by copying an " " in the PDF file and specifying it in the "Find what:" field. PS2501-1,-4,PS2501L-1,-4 PACKAGE DIMENSIONS (UNIT : mm) DIP Type PS2501-1 PS2501-4 4.6±0.35 4 3 1 2 19.8±0.5 7.62 0 to 15 +0.1 0.25 –0.05 1.25±0.15 0.50±0.10 0.25 M 16 9 1 8 0 to 15 +0.1 0.25 –0.05 0.50±0.10 1.25±0.15 7.62 0.25 M 2.54 2.54 Lead Bending Type PS2501L-1 PS2501L-4 4.6±0.35 19.8±0.5 4 3 16 9 1 2 1 8 1.25±0.15 0.9±0.25 9.60±0.4 0.25 M 2.54 1.25±0.15 0.25 M 2.54 0.15 PHOTOCOUPLER CONSTRUCTION Parameter Unit (MIN.) Air Distance 7 mm Outer Creepage Distance 7 mm Inner Creepage Distance 3.5 mm Isolation Distance 0.3 mm 2 Data Sheet PN10225EJ05V0DS 0.15 0.9±0.25 9.60±0.4 PS2501-1,-4,PS2501L-1,-4 MARKING EXAMPLE PS2501-1 PS2501-4 No. 1 pin Mark No. 1 pin Mark 2501 MJ031 M J Assembly Lot 0 31 N J Country Assembled Type Number Assembly Lot 0 31 Week Assembled Year Assembled (Last 1 Digit) In-house Code CTR Rank Code Week Assembled Year Assembled (Last 1 Digit) In-house Code CTR Rank Code Package PS2501-4 NJ031 Made in Japan Made in Taiwan Pb-Free New PKG J K Pb-Free and New PKG R Y Package New PKG Made in Japan J Halogen Free *1 *1 Special version Data Sheet PN10225EJ05V0DS 3 PS2501-1,-4,PS2501L-1,-4 ORDERING INFORMATION Part Number Order Number Solder Plating Specification Pb-Free Packing Style PS2501-1 PS2501-1-A Magazine case 100 pcs PS2501L-1 PS2501L-1-A PS2501L-1-F3 PS2501L-1-F3-A Embossed Tape 2 000 pcs/reel PS2501-4 PS2501-4-A Magazine case 20 pcs PS2501L-4 PS2501L-4-A PS2501-1 PS2501-1Y-A Special version PS2501L-1 PS2501L-1Y-A (Pb-Free and PS2501L-1-F3 PS2501L-1Y-F3-A Halogen Free) Safety Standard Approval Standard products PS2501-1 (UL approved) Magazine case 100 pcs PS2501-4 Standard products (UL approved) Embossed Tape 2 000 pcs/reel *1 For the application of the Safety Standard, following part number should be used. 4 Application Part *1 Number Data Sheet PN10225EJ05V0DS PS2501-1 PS2501-1,-4,PS2501L-1,-4 ABSOLUTE MAXIMUM RATINGS (Unless otherwise specified, T A = 25 C) Ratings Parameter Diode Symbol PS2501-4, PS2501L-4 Unit Reverse Voltage VR 6 V Forward Current (DC) IF 80 mA/ch Power Dissipation Derating Power Dissipation Peak Forward Current Transistor PS2501-1, PS2501L-1 PD/ C PD *1 1.5 1.2 mW/ C 150 120 mW/ch IFP 1 A/ch Collector to Emitter Voltage VCEO 80 V Emitter to Collector Voltage VECO 7 V IC 50 mA/ch Collector Current Power Dissipation Derating Power Dissipation *2 PC/ C PC 1.5 1.2 mW/ C 150 120 mW/ch Isolation Voltage BV 5 000 Vr.m.s. Operating Ambient Temperature TA 55 to +100 C Storage Temperature Tstg 55 to +150 C *1 PW = 100 s, Duty Cycle = 1% *2 AC voltage for 1 minute at TA = 25 C, RH = 60% between input and output. Pins 1-2 shorted together, 3-4 shorted together (PS2501-1, PS2501L-1). Pins 1-8 shorted together, 9-16 shorted together (PS2501-4, PS2501L-4). Data Sheet PN10225EJ05V0DS 5 PS2501-1,-4,PS2501L-1,-4 ELECTRICAL CHARACTERISTICS (TA = 25 C) Parameter Diode Symbol Forward Voltage Conditions VF IF = 10 mA Reverse Current IR VR = 5 V Terminal Capacitance Ct V = 0 V, f = 1.0 MHz Collector to Emitter Dark Current ICEO VCE = 80 V, IF = 0 mA Coupled Current Transfer Ratio *1 (IC/IF) CTR IF = 5 mA, VCE = 5 V Collector Saturation Voltage VCE (sat) IF = 10 mA, IC = 2 mA Isolation Resistance RI-O VI-O = 1.0 kVDC Isolation Capacitance CI-O V = 0 V, f = 1.0 MHz *2 tr *2 Fall Time TYP. MAX. Unit 1.17 1.4 V 5 Transistor Rise Time MIN. A 50 80 pF 300 100 nA 600 % 0.3 V 1011 VCC = 10 V, IC = 2 mA, RL = 100 tf 0.5 pF 3 s 5 *1 CTR rank ( * : only PS2501-1, PS2501L-1) K* : 300 to 600 (%) L* : 200 to 400 (%) M* : 80 to 240 (%) D* : 100 to 300 (%) H* : 80 to 160 (%) W* : 130 to 260 (%) Q* : 100 to 200 (%) N : 80 to 600 (%) *2 Test circuit for switching time Pulse Input IF VCC PW = 100 s Duty Cycle = 1/10 Input 50 ton VOUT RL = 100 td toff ts 90% Output 10% tr 6 Data Sheet PN10225EJ05V0DS tf PS2501-1,-4,PS2501L-1,-4 TYPICAL CHARACTERISTICS (Unless otherwise specified, T A = 25 C) DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE 150 TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE 150 PS2501-1 PS2501L-1 100 PS2501-4 PS2501L-4 50 PS2501-4 PS2501L-4 1.5 mW/ C 25 50 75 1.5 mW/ C 50 1.2 mW/ C 0 PS2501-1 PS2501L-1 100 1.2 mW/ C 100 125 150 0 25 75 50 100 125 150 Ambient Temperature TA ( C) Ambient Temperature TA ( C) COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE FORWARD CURRENT vs. FORWARD VOLTAGE 100 70 50 TA = +100 C +60 C +25 C 10 60 50 5 40 0C –25 C –50 C 1 30 0.5 20 IF = 5 mA 10 0.1 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 0 1.5 2 4 6 8 10 Forward Voltage VF (V) Collector to Emitter Voltage VCE (V) COLLECTOR TO EMITTER DARK CURRENT vs. AMBIENT TEMPERATURE COLLECTOR CURRENT vs. COLLECTOR SATURATION VOLTAGE 40 10 000 VCE = 80 V 40 V 24 V 10 V 5V 1 000 50 mA 20 mA 10 mA 10 5 mA 5 2 mA 100 IF = 1 mA 1 10 0.5 1 – 50 –25 0 25 50 75 100 0.1 Ambient Temperature TA ( C) Remark 0 0.2 0.4 0.6 0.8 1.0 Collector Saturation Voltage VCE (sat) (V) The graphs indicate nominal characteristics. Data Sheet PN10225EJ05V0DS 7 PS2501-1,-4,PS2501L-1,-4 NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE 1.2 450 VCE = 5 V 400 1.0 350 0.8 Sample A B C D 300 250 0.6 200 0.4 150 Normalized to 1.0 at TA = 25 C, IF = 5 mA, VCE = 5 V 0.2 0 CURRENT TRANSFER RATIO vs. FORWARD CURRENT –50 –25 0 25 50 75 100 50 0 100 0.05 0.1 SWITCHING TIME vs. LOAD RESISTANCE 10 5 10 50 SWITCHING TIME vs. LOAD RESISTANCE 1 000 IC = 2 mA, VCC = 10 V, CTR = 290% 1 Forward Current IF (mA) Ambient Temperature TA ( C) 50 0.5 tf tr tf IF = 5 mA, VCC = 5 V, CTR = 290% ts 100 td ts 1 10 tr 0.1 10 50 100 1 100 5 k 10 k 500 1 k Load Resistance RL ( ) IF = 5 mA, VCE = 5 V –5 100 –15 50 k 100 k LONG TERM CTR DEGRADATION 1.2 IF = 5 mA 1.0 0.8 –10 5 k 10 k Load Resistance RL ( ) FREQUENCY RESPONSE 0 td 500 1 k TA = 25 C 0.6 TA = 60 C 0.4 RL = 1 k 0.2 –20 300 0.5 1 2 5 10 20 50 100 200 500 Frequency f (kHz) Remark 8 0 102 103 Time (Hr) The graphs indicate nominal characteristics. Data Sheet PN10225EJ05V0DS 104 105 PS2501-1,-4,PS2501L-1,-4 TAPING SPECIFICATIONS (UNIT : mm) Outline and Dimensions (Tape) 2.0±0.1 4.0±0.1 4.5 MAX. 1.5 +0.1 –0 1.55±0.1 4.0±0.1 5.3±0.1 8.0±0.1 0.4 Tape Direction PS2501L-1-F3 Outline and Dimensions (Reel) 2.0±0.5 2.0±0.5 13.0±0.2 R 1.0 21.0±0.8 17.5±1.0 21.5±1.0 Packing: 2 000 pcs/reel Data Sheet PN10225EJ05V0DS 15.9 to 19.4 Outer edge of flange 9 PS2501-1,-4,PS2501L-1,-4 NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering • Peak reflow temperature 260 C or below (package surface temperature) • Time of peak reflow temperature 10 seconds or less • Time of temperature higher than 220 C 60 seconds or less • Time to preheat temperature from 120 to 180 C 120 30 s • Number of reflows Three • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s 260 C MAX. 220 C to 60 s 180 C 120 C 120±30 s (preheating) Time (s) (2) Wave soldering • Temperature 260 C or below (molten solder temperature) • Time 10 seconds or less • Preheating conditions 120 C or below (package surface temperature) • Number of times One (Allowed to be dipped in solder including plastic mold portion.) • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Soldering by soldering iron • Peak temperature (lead part temperature) 350 C or below • Time (each pins) 3 seconds or less • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead. (b) Please be sure that the temperature of the package would not be heated over 100 C. 10 Data Sheet PN10225EJ05V0DS PS2501-1,-4,PS2501L-1,-4 (4) Cautions • Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between collector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings. 3. Measurement conditions of current transfer ratios (CTR), which differ according to photocoupler Check the setting values before use, since the forward current conditions at CTR measurement differ according to product. When using products other than at the specified forward current, the characteristics curves may differ from the standard curves due to CTR value variations or the like. This tendency may sometimes be obvious, especially below IF = 1 mA. Therefore, check the characteristics under the actual operating conditions and thoroughly take variations or the like into consideration before use. USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity. Data Sheet PN10225EJ05V0DS 11 PS2501-1,-4,PS2501L-1,-4 Caution GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. • Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. • Do not burn, destroy, cut, crush, or chemically dissolve the product. • Do not lick the product or in any way allow it to enter the mouth.