PS2521L-1

PHOTOCOUPLER PS2521-1,-2,-4,PS2521L-1,-2,-4 LARGE FORWARD INPUT TYPE HIGH ISOLATION VOLTAGE MULTI PHOTOCOUPLER SERIES −NEPOC Series− DESCRIPTION The PS2521-1, -2, -4 and PS2521L-1, -2, -4 are optically coupled isolators containing a GaAs light emitting diode and an NPN silicon phototransistor. The PS2521-1, -2, -4 are in a plastic DIP (Dual In-line Package) and the PS2521L-1, -2, -4 are lead bending type (Gull-wing) for surface mount. FEATURES • Large forward input current (IF = 150 mA) • High Isolation voltage (BV = 5 000 Vr.m.s.) • High collector to emitter voltage (VCEO = 80 V) • High-speed switching (tr = 3 µs TYP., tf = 5 µs TYP.) • Ordering number of tape product: PS2521L-1-E3, E4, F3, F4, PS2521L-2-E3, E4 • Safety standards • UL approved: File No. E72422 (S) • CSA approved: No. CA 101391 APPLICATIONS • Exchange equipment • FAX/MODEM • LCR adapter Document No. PN10230EJ01V0DS (1st edition) (Previous No. P11432EJ4V0DS00) Date Published February 2003 CP(K) The mark shows major revised points. PS2521-1,-2,-4,PS2521L-1,-2,-4 PACKAGE DIMENSIONS (Unit : mm) DIP Type PS2521-1 4.6±0.5 4 TOP VIEW 3 1. Anode 2. Cathode 3. Emitter 4. Collector PS2521-2 9.7±0.5 8 7 TOP VIEW 6 5 1, 3. Anode 2, 4. Cathode 5, 7. Emitter 6, 8. Collector 6.5±0.5 6.5±0.5 1 2 7.62 1 2 34 7.62 3.3±0.5 4.15±0.4 3.3±0.5 4.15±0.4 3.5±0.3 3.5±0.3 1.25±0.15 0 to 15˚ +0.1 0.25 –0.05 0.50±0.10 0.25 M 1.25±0.15 2.54 0.50±0.10 0.25 M 0 to 15˚ +0.1 0.25 –0.05 2.54 PS2521-4 19.8±0.5 TOP VIEW 16 15 14 13 12 11 10 9 6.5±0.5 1 2 3 7.62 3.3±0.5 4.15±0.4 3.5±0.3 45678 1, 3, 5, 7. Anode 2, 4, 6, 8. Cathode 9, 11, 13, 15. Emitter 10, 12, 14, 16. Collector 1.25±0.15 2.54 0.50±0.10 0.25 M 0 to 15˚ +0.1 0.25 –0.05 2 Data Sheet PN10230EJ01V0DS PS2521-1,-2,-4,PS2521L-1,-2,-4 Lead Bending Type PS2521L-1 4.6±0.5 PS2521L-2 9.7±0.5 TOP VIEW 4 3 TOP VIEW 8 7 6 5 1, 3. Anode 2, 4. Cathode 5, 7. Emitter 6, 8. Collector 6.5±0.5 6.5±0.5 1. Anode 2. Cathode 3. Emitter 4. Collector 1 2 1 2 3 4 0.25 +0.1 –0.05 0.25 +0.1 –0.05 0.1 +0.1 –0.05 3.5±0.3 3.5±0.3 1.25±0.15 0.25 M 2.54 0.15 0.9±0.25 9.60±0.4 1.25±0.15 0.25 M 2.54 0.15 0.9±0.25 9.60±0.4 PS2521L-4 19.8±0.5 TOP VIEW 16 15 14 13 12 11 10 9 6.5±0.5 1 0.25 +0.1 –0.05 2345678 1, 3, 5, 7. Anode 2, 4, 6, 8. Cathode 9, 11, 13, 15. Emitter 10, 12, 14, 16. Collector 3.5±0.3 1.25±0.15 0.25 M 2.54 0.15 0.9±0.25 9.60±0.4 0.1 +0.1 –0.05 0.1 +0.1 –0.05 Data Sheet PN10230EJ01V0DS 3 PS2521-1,-2,-4,PS2521L-1,-2,-4 MARKING EXAMPLE PS2521-1 No. 1 pin Mark No. 1 pin Mark PS2521-2, -4 2521 M 003 Assembly Lot PS2521-2 M 003 Country Assembled Type Number Assembly Lot M 0 03 M 0 03 Week Assembled Year Assembled (Last 1 Digit) In-house Code CTR Rank Code Week Assembled Year Assembled (Last 1 Digit) In-house Code CTR Rank Code Package Standard PKG New PKG Made in Japan Made in Taiwan Package Standard PKG New PKG Made in Japan Made in Taiwan Blank Blank ORDERING INFORMATION (Solder Contains Lead) Part Number PS2521-1 PS2521L-1 PS2521L-1-E3 PS2521L-1-E4 PS2521L-1-F3 PS2521L-1-F4 PS2521-2 PS2521L-2 PS2521L-2-E3 PS2521L-2-E4 PS2521-4 PS2521L-4 16-pin DIP Magazine case 20 pcs PS2521-4 Embossed Tape 1 000 pcs/reel 8-pin DIP Magazine case 45 pcs PS2521-2 Embossed Tape 2 000 pcs/reel Embossed Tape 1 000 pcs/reel Package 4-pin DIP Packing Style Magazine case 100 pcs Application Part Number PS2521-1 *1 *1 For the application of the Safety Standard, following part number should be used. 4 Data Sheet PN10230EJ01V0DS PS2521-1,-2,-4,PS2521L-1,-2,-4 ORDERING INFORMATION (Pb-Free) Part Number PS2521-1-A PS2521L-1-A PS2521L-1-E3-A PS2521L-1-E4-A PS2521L-1-F3-A PS2521L-1-F4-A PS2521-2-A PS2521L-2-A PS2521L-2-E3-A PS2521L-2-E4-A PS2521-4-A PS2521L-4-A 16-pin DIP Magazine case 20 pcs PS2521-4 Embossed Tape 1 000 pcs/reel 8-pin DIP Magazine case 45 pcs PS2521-2 Embossed Tape 2 000 pcs/reel Embossed Tape 1 000 pcs/reel Package 4-pin DIP Packing Style Magazine case 100 pcs Application Part Number PS2521-1 *1 *1 For the application of the Safety Standard, following part number should be used. ABSOLUTE MAXIMUM RATINGS (TA = 25 °C, unless otherw ise specified) Ratings Parameter Symbol PS2521-1, PS2521L-1 PS2521-2, -4, PS2521L-2, 4 Unit Diode Forward Current (DC) Reverse Voltage Power Dissipation Derating Power Dissipation Peak Forward Current *1 IF VR 150 6.0 2.5 250 1 80 6 50 1.5 150 5 000 −55 to +100 −55 to +150 1.2 120 2.0 200 mA V mW/°C mW/ch A V V mA/ch mW/°C mW/ch Vr.m.s. °C °C ∆PD/°C PD IFP VCEO VECO IC Transistor Collector to Emitter Voltage Emitter to Collector Voltage Collector Current Power Dissipation Derating Power Dissipation ∆PC/°C PC BV TA Tstg Isolation Voltage *2 Operating Ambient Temperature Storage Temperature *1 PW = 100 µs, Duty Cycle = 1 % *2 AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and output Data Sheet PN10230EJ01V0DS 5 PS2521-1,-2,-4,PS2521L-1,-2,-4 ELECTRICAL CHARACTERISTICS (TA = 25 °C) Parameter Diode Forward Voltage Reverse Current Terminal Capacitance Transistor Coupled Collector to Emitter Dark Current Current Transfer Ratio (IC/IF) Collector Saturation Voltage Isolation Resistance Isolation Capacitance Rise Time Fall Time *1 Symbol VF IR Ct ICEO CTR IF = 100 mA VR = 5 V Conditions MIN. TYP. 1.3 MAX. 1.7 5 Unit V µA pF V = 0 V, f = 1.0 MHz VCE = 80 V, IF = 0 mA IF = 100 mA, VCE = 3 V 20 70 100 80 nA % VCE(sat) RI-O CI-O tr tf IF = 100 mA, IC = 4 mA VI-O = 1.0 kVDC V = 0 V, f = 1.0 MHz VCC = 10 V, IC = 2 mA, RL = 100 Ω 10 11 0.3 V Ω 0.6 3 5 pF µs *1 *1 Test circuit for switching time Pulse input (PW = 100 µ s, Duty cycle = 1/10) IF 50 Ω VOUT RL = 100 Ω VCC 6 Data Sheet PN10230EJ01V0DS PS2521-1,-2,-4,PS2521L-1,-2,-4 TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherw ise specified) DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE Transistor Power Dissipation PC (mW) 250 TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE 150 PS2521-1 PS2521L-1 100 PS2521-2, -4 PS2521L-2, -4 50 1.2 mW/˚C 1.5 mW/˚C Diode Power Dissipation PD (mW) 200 PS2521-1 PS2521L-1 150 PS2521-2, -4 PS2521L-2, -4 2.0 mW/˚C 50 2.5 mW/˚C 100 0 25 50 75 100 125 0 25 50 75 100 125 Ambient Temperature TA (˚C) Ambient Temperature TA (˚C) FORWARD CURRENT vs. FORWARD VOLTAGE 100 TA = +100 ˚C +75 ˚C +50 ˚C COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE 70 60 Collector Current IC (mA) Forward Current IF (mA) 10 50 40 30 20 10 1 +25 ˚C 0 ˚C –25 ˚C –55 ˚C A 0m = 5 0 mA IF 2 mA 10 5 mA 0.1 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0 2 4 6 8 10 Forward Voltage VF (V) Collector to Emitter Voltage VCE (V) COLLECTOR TO EMITTER DARK CURRENT vs. AMBIENT TEMPERATURE Collector to Emitter Dark Current ICEO (nA) 10 000 COLLECTOR CURRENT vs. COLLECTOR SATURATION VOLTAGE 50 IF = 50 mA 10 5 1 0.5 0.1 0.05 0.01 0.0 20 mA 10 mA Collector Current IC (mA) 1 000 100 VCE = 80 V 40 V 24 V 10 V 5V 5 mA 2 mA 1 mA 10 1 0.1 –60 –40 –20 0 20 40 60 80 100 0.2 0.4 0.6 0.8 1.0 Ambient Temperature TA (˚C) Collector Saturation Voltage VCE (sat) (V) Data Sheet PN10230EJ01V0DS 7 PS2521-1,-2,-4,PS2521L-1,-2,-4 NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE Normalized Current Transfer Ratio CTR 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 –50 –25 0 CURRENT TRANSFER RATIO vs. FORWARD CURRENT 250 VCE = 3 V Sample A B C Current Transfer Ratio CTR (%) ;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;; Normalized to 1.0 at TA = 25 ˚C, IF = 100 mA, VCE = 3 V 100 25 50 75 200 150 100 50 0 0.1 0.5 1 5 10 50 100 Ambient Temperature TA (˚C) Forward Current IF (mA) SWITCHING TIME vs. LOAD RESISTANCE 100 50 VCC = 10 V, IC = 2 mA 0 FREQUENCY RESPONSE Switching Time t ( µ s) Normalized Gain GV ton toff 10 5 tf tr –3 RL = 100 Ω 1 kΩ 330 µF RL 500 1 k 50 Ω VCC = 5 V 500 Ω –6 –9 –12 1 50 100 200 500 1k 2k 100 IC = 2 mA 50 k 100 k 500 k 5 k 10 k Frequency f (Hz) Load Resistance RL (Ω) LONG TERM CTR DEGRADATION 1.2 1.0 IF = 5 mA 20 mA 40 mA CTR (Relative Value) 0.8 0.6 0.4 0.2 0.0 CTR Test condition IF = 5 mA, VCE = 5 V 1 102 103 104 105 106 Time (Hr) Remark The graphs indicate nominal characteristics. 8 Data Sheet PN10230EJ01V0DS PS2521-1,-2,-4,PS2521L-1,-2,-4 TAPING SPECIFICATIONS (Unit : mm) Outline and Dimensions (Tape) 2.0±0.1 4.0±0.1 1.75±0.1 φ 1.5 +0.1 –0 4.5 MAX. 16.0±0.3 7.5±0.1 1.55±0.1 8.0±0.1 10.3±0.1 5.3±0.1 4.0±0.1 0.4 Tape Direction PS2521L-1-E3 PS2521L-1-E4 Outline and Dimensions (Reel) 2.0±0.5 2.0±0.5 φ 13.0±0.2 R 1.0 φ 21.0±0.8 φ 80.0±1.0 φ 254±2.0 17.5±1.0 21.5±1.0 Packing: 1 000 pcs/reel 15.9 to 19.4 Outer edge of flange Data Sheet PN10230EJ01V0DS 9 PS2521-1,-2,-4,PS2521L-1,-2,-4 Outline and Dimensions (Tape) 2.0±0.1 4.0±0.1 1.75±0.1 1.5 +0.1 –0 4.5 MAX. 16.0±0.3 7.5±0.1 1.55±0.1 8.0±0.1 10.3±0.1 5.3±0.1 4.0±0.1 0.4 Tape Direction PS2521L-1-F3 PS2521L-1-F4 Outline and Dimensions (Reel) 2.0±0.5 2.0±0.5 φ 13.0±0.2 R 1.0 φ 21.0±0.8 φ 330±2.0 φ 100±1.0 17.5±1.0 21.5±1.0 Packing: 2 000 pcs/reel 15.9 to 19.4 Outer edge of flange 10 Data Sheet PN10230EJ01V0DS PS2521-1,-2,-4,PS2521L-1,-2,-4 Outline and Dimensions (Tape) 2.0±0.1 4.0±0.1 1.75±0.1 1.5 +0.1 –0 4.5 MAX. 16.0±0.3 7.5±0.1 10.3±0.1 1.55±0.1 12.0±0.1 10.4±0.1 0.3 4.0±0.1 Tape Direction PS2521L-2-E3 PS2521L-2-E4 Outline and Dimensions (Reel) 2.0±0.5 330±2.0 2.0±0.5 13.0±0.2 R 1.0 21.0±0.8 17.5±1.0 21.5±1.0 100±1.0 Packing: 1 000 pcs/reel 15.9 to 19.4 Outer edge of flange Data Sheet PN10230EJ01V0DS 11 PS2521-1,-2,-4,PS2521L-1,-2,-4 NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering • Peak reflow temperature • Time of peak reflow temperature • Time of temperature higher than 220°C • Time to preheat temperature from 120 to 180°C • Number of reflows • Flux 260°C or below (package surface temperature) 10 seconds or less 60 seconds or less 120±30 s Three Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Recommended Temperature Profile of Infrared Reflow Package Surface Temperature T (˚C) (heating) to 10 s 260˚C MAX. 220˚C to 60 s 180˚C 120˚C 120±30 s (preheating) Time (s) (2) Wave soldering • Temperature • Time • Preheating conditions • Number of times • Flux 260°C or below (molten solder temperature) 10 seconds or less 120°C or below (package surface temperature) One (Allowed to be dipped in solder including plastic mold portion.) Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Cautions • Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between collector-emitters at startup, the output side may enter the on state, even if the voltage is within the absolute maximum ratings. 12 Data Sheet PN10230EJ01V0DS PS2521-1,-2,-4,PS2521L-1,-2,-4 USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity. Data Sheet PN10230EJ01V0DS 13 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Lead (Pb) Mercury Cadmium Hexavalent Chromium PBB PBDE Concentration Limit per RoHS (values are not yet fixed) < 1000 PPM < 1000 PPM < 100 PPM < 1000 PPM < 1000 PPM < 1000 PPM Concentration contained in CEL devices -A Not Detected Not Detected Not Detected Not Detected Not Detected Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.