PS2525-4-A

PHOTOCOUPLER PS2525-1,-2,-4,PS2525L-1,-2,-4 LARGE FORWARD INPUT TYPE AC INPUT RESPONSE TYPE MULTI PHOTOCOUPLER SERIES −NEPOC Series− DESCRIPTION The PS2525-1, -2, -4 and PS2525L-1, -2, -4 are optically coupled isolators containing GaAs light emitting diodes and an NPN silicon phototransistor. The PS2525-1, -2, -4 are in a plastic DIP (Dual In-line Package) and the PS2525L-1, -2, -4 are lead bending type (Gull-wing) for surface mount. FEATURES • Large forward input current (IF = ±150 mA) • AC input response • High Isolation voltage (BV = 5 000 Vr.m.s.) • High collector to emitter voltage (VCEO = 80 V) • High-speed switching (tr = 3 µs TYP., tf = 5 µs TYP.) • Ordering number of tape product: PS2525L-1-E3, E4, F3, F4, PS2525L-2-E3, E4 • Safety standards • UL approved: File No. E72422 (S) • CSA approved: No. CA 101391 APPLICATIONS • Exchange equipment • FAX/MODEM • LCR adapter Document No. PN10231EJ01V0DS (1st edition) (Previous No. P11433EJ4V0DS00) Date Published February 2003 CP(K) The mark shows major revised points. PS2525-1,-2,-4,PS2525L-1,-2,-4 PACKAGE DIMENSIONS (Unit : mm) DIP Type PS2525-1 4.6±0.5 4 TOP VIEW 3 1. Anode, Cathode 2. Cathode, Anode 3. Emitter 4. Collector PS2525-2 9.7±0.5 8 7 TOP VIEW 6 5 1, 3. Anode, Cathode 2, 4. Cathode, Anode 5, 7. Emitter 6, 8. Collector 6.5±0.5 6.5±0.5 1 2 7.62 1 2 34 7.62 3.3±0.5 4.15±0.4 3.3±0.5 4.15±0.4 3.5±0.3 3.5±0.3 1.25±0.15 0 to 15˚ +0.1 0.25 –0.05 0.50±0.10 0.25 M 2.54 1.25±0.15 2.54 0.50±0.10 0.25 M 0 to 15˚ +0.1 0.25 –0.05 PS2525-4 19.8±0.5 TOP VIEW 16 15 14 13 12 11 10 9 6.5±0.5 1 7.62 2 3 3.3±0.5 4.15±0.4 3.5±0.3 45678 1, 3, 5, 7. Anode, Cathode 2, 4, 6, 8. Cathode, Anode 9, 11, 13, 15. Emitter 10, 12, 14, 16. Collector 1.25±0.15 2.54 0.50±0.10 0.25 M 0 to 15˚ +0.1 0.25 –0.05 2 Data Sheet PN10231EJ01V0DS PS2525-1,-2,-4,PS2525L-1,-2,-4 Lead Bending Type PS2525L-1 4.6±0.5 PS2525L-2 1. Anode, Cathode 2. Cathode, Anode 3. Emitter 4. Collector 9.7±0.5 TOP VIEW 4 3 TOP VIEW 8 7 6 5 1, 3. Anode, Cathode 2, 4. Cathode, Anode 5, 7. Emitter 6, 8. Collector 1 2 3 4 6.5±0.5 1 2 6.5±0.5 0.25 +0.1 –0.05 0.25 +0.1 –0.05 0.1 +0.1 –0.05 3.5±0.3 3.5±0.3 1.25±0.15 0.25 M 2.54 0.15 0.9±0.25 9.60±0.4 1.25±0.15 0.25 M 2.54 0.15 0.9±0.25 9.60±0.4 PS2525L-4 19.8±0.5 TOP VIEW 16 15 14 13 12 11 10 9 6.5±0.5 0.25 +0.1 –0.05 12345678 1, 3, 5, 7. Anode, Cathode 2, 4, 6, 8. Cathode, Anode 9, 11, 13, 15. Emitter 10, 12, 14, 16. Collector 3.5±0.3 1.25±0.15 0.25 M 2.54 0.15 0.9±0.25 9.60±0.4 0.1 +0.1 –0.05 0.1 +0.1 –0.05 Data Sheet PN10231EJ01V0DS 3 PS2525-1,-2,-4,PS2525L-1,-2,-4 MARKING EXAMPLE PS2525-1 No. 1 pin Mark No. 1 pin Mark PS2525-2, -4 2525 M 003 Assembly Lot PS2525-2 M 003 Country Assembled Type Number Assembly Lot M 0 03 M 0 03 Week Assembled Year Assembled (Last 1 Digit) In-house Code CTR Rank Code Week Assembled Year Assembled (Last 1 Digit) In-house Code CTR Rank Code Package Standard PKG New PKG Made in Japan Made in Taiwan Package Standard PKG New PKG Made in Japan Made in Taiwan Blank Blank 4 Data Sheet PN10231EJ01V0DS PS2525-1,-2,-4,PS2525L-1,-2,-4 ORDERING INFORMATION (Solder Contains Lead) Part Number PS2525-1 PS2525L-1 PS2525L-1-E3 PS2525L-1-E4 PS2525L-1-F3 PS2525L-1-F4 PS2525-2 PS2525L-2 PS2525L-2-E3 PS2525L-2-E4 PS2525-4 PS2525L-4 16-pin DIP Magazine case 20 pcs PS2525-4 Embossed Tape 1 000 pcs/reel 8-pin DIP Magazine case 45 pcs PS2525-2 Embossed Tape 2 000 pcs/reel Embossed Tape 1 000 pcs/reel Package 4-pin DIP Packing Style Magazine case 100 pcs Application Part Number PS2525-1 *1 *1 For the application of the Safety Standard, following part number should be used. ORDERING INFORMATION (Pb-Free) Part Number PS2525-1-A PS2525L-1-A PS2525L-1-E3-A PS2525L-1-E4-A PS2525L-1-F3-A PS2525L-1-F4-A PS2525-2-A PS2525L-2-A PS2525L-2-E3-A PS2525L-2-E4-A PS2525-4-A PS2525L-4-A 16-pin DIP Magazine case 20 pcs PS2525-4 Embossed Tape 1 000 pcs/reel 8-pin DIP Magazine case 45 pcs PS2525-2 Embossed Tape 2 000 pcs/reel Embossed Tape 1 000 pcs/reel Package 4-pin DIP Packing Style Magazine case 100 pcs Application Part Number PS2525-1 *1 *1 For the application of the Safety Standard, following part number should be used. Data Sheet PN10231EJ01V0DS 5 PS2525-1,-2,-4,PS2525L-1,-2,-4 ABSOLUTE MAXIMUM RATINGS (TA = 25 °C, unless otherw ise specified) Ratings Parameter Symbol PS2525-1, PS2525L-1 PS2525-2, -4, PS2525L-2, 4 Unit Diode Forward Current (DC) Power Dissipation Derating Power Dissipation Peak Forward Current *1 IF ±150 2.5 250 ±1 80 6 50 1.5 150 5 000 −55 to +100 −55 to +150 1.2 120 2.0 200 mA mW/°C mW/ch A V V mA/ch mW/°C mW/ch Vr.m.s. °C °C ∆PD/°C PD IFP VCEO VECO IC Transistor Collector to Emitter Voltage Emitter to Collector Voltage Collector Current Power Dissipation Derating Power Dissipation ∆PC/°C PC BV TA Tstg Isolation Voltage *2 Operating Ambient Temperature Storage Temperature *1 PW = 100 µs, Duty Cycle = 1 % *2 AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and output 6 Data Sheet PN10231EJ01V0DS PS2525-1,-2,-4,PS2525L-1,-2,-4 ELECTRICAL CHARACTERISTICS (TA = 25 °C) Parameter Diode Forward Voltage Terminal Capacitance Transistor Coupled Collector to Emitter Dark Current Current Transfer Ratio (IC/IF) CTR Ratio *1 Symbol VF Ct ICEO CTR CTR1/ CTR2 VCE(sat) RI-O CI-O tr tf IF = ±100 mA Conditions MIN. TYP. 1.3 140 MAX. 1.7 Unit V pF V = 0 V, f = 1.0 MHz VCE = 80 V, IF = 0 mA IF = ±100 mA, VCE = 3 V IF = ±100 mA, VCE = 3 V IF = ±100 mA, IC = 4 mA VI-O = 1.0 kVDC V = 0 V, f = 1.0 MHz VCC = 10 V, IC = 2 mA, RL = 100 Ω 10 11 100 20 80 nA % 0.3 1.0 3.0 0.3 V Ω Collector Saturation Voltage Isolation Resistance Isolation Capacitance Rise Time Fall Time *2 0.6 3 5 pF µs *2 *1 CTR1 = IC1/IF1, CTR2 = IC2/IF2 IF1 IF2 IF1 VCE IF2 *2 Test circuit for switching time IF Pulse input (PW = 100 µ s, Duty cycle = 1/10) VOUT 50 Ω RL = 100 Ω VCC Data Sheet PN10231EJ01V0DS 7 PS2525-1,-2,-4,PS2525L-1,-2,-4 TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherw ise specified) DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE Transistor Power Dissipation PC (mW) TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE 150 PS2525-1 PS2525L-1 100 PS2525-2, -4 PS2525L-2, -4 50 1.2 mW/˚C 1.5 mW/˚C 250 Diode Power Dissipation PD (mW) 200 PS2525-1 PS2525L-1 150 PS2525-2, -4 PS2525L-2, -4 2.0 mW/˚C 50 2.5 mW/˚C 100 0 25 50 75 100 125 0 25 50 75 100 125 Ambient Temperature TA (˚C) Ambient Temperature TA (˚C) FORWARD CURRENT vs. FORWARD VOLTAGE 150 100 Forward Current IF (mA) Forward Current IF (mA) FORWARD CURRENT vs. FORWARD VOLTAGE 10 TA = +100 ˚C +75 ˚C +50 ˚C 100 50 0 –50 –100 1 +25 ˚C 0 ˚C –25 ˚C –55 ˚C 0.1 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 –150 –1.5 –1.0 –0.5 0.0 0.5 1.0 1.5 Forward Voltage VF (V) Forward Voltage VF (V) COLLECTOR TO EMITTER DARK CURRENT vs. AMBIENT TEMPERATURE Collector to Emitter Dark Current ICEO (nA) COLLECTOR CURRENT vs. COLLECTOR SATURATION VOLTAGE 50 IF = 50 mA Collector Current IC (mA) 20 mA 10 mA 10 000 1 000 10 5 1 0.5 0.1 0.05 0.01 0.0 100 VCE = 80 V 40 V 24 V 10 V 5V 5 mA 2 mA 1 mA 10 1 0.1 –60 –40 –20 0 20 40 60 80 100 0.2 0.4 0.6 0.8 1.0 Ambient Temperature TA (˚C) Collector Saturation Voltage VCE (sat) (V) 8 Data Sheet PN10231EJ01V0DS PS2525-1,-2,-4,PS2525L-1,-2,-4 COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE Normalized Current Transfer Ratio CTR NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 –50 –25 0 70 60 Collector Current IC (mA) 50 40 30 20 10 0 2 4 6 8 10 A 0m = 5 0 mA IF 2 mA 10 ;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;; Normalized to 1.0 at TA = 25 ˚C, IF = 100 mA, VCE = 3 V 100 25 50 75 5 mA Collector to Emitter Voltage VCE (V) Ambient Temperature TA (˚C) CURRENT TRANSFER RATIO vs. FORWARD CURRENT 250 Current Transfer Ratio CTR (%) SWITCHING TIME vs. LOAD RESISTANCE 100 50 Switching Time t ( µ s) VCE = 3 V Sample A B C VCC = 10 V, IC = 2 mA 200 150 ton toff 10 5 tf tr 100 50 0 0.1 0.5 1 5 10 50 100 1 50 100 200 500 1k 2k Forward Current IF (mA) Load Resistance RL (Ω) FREQUENCY RESPONSE 1.2 0 1.0 –3 CTR (Relative Value) Normalized Gain GV LONG TERM CTR DEGRADATION IF = 5 mA 20 mA 40 mA RL = 100 Ω 1 kΩ 330 µF 50 Ω VCC = 5 V 500 Ω 0.8 0.6 0.4 0.2 0.0 –6 –9 –12 100 500 1 k IC = RL 2 mA 5 k 10 k Frequency f (Hz) 50 k 100 k 500 k CTR Test condition IF = 5 mA, VCE = 5 V 1 102 103 104 105 106 Time (Hr) Remark The graphs indicate nominal characteristics. Data Sheet PN10231EJ01V0DS 9 PS2525-1,-2,-4,PS2525L-1,-2,-4 TAPING SPECIFICATIONS (Unit : mm) Outline and Dimensions (Tape) 2.0±0.1 4.0±0.1 1.75±0.1 φ 1.5 +0.1 –0 4.5 MAX. 16.0±0.3 7.5±0.1 1.55±0.1 8.0±0.1 10.3±0.1 5.3±0.1 4.0±0.1 0.4 Tape Direction PS2525L-1-E3 PS2525L-1-E4 Outline and Dimensions (Reel) 2.0±0.5 2.0±0.5 φ 13.0±0.2 R 1.0 φ 21.0±0.8 φ 80.0±1.0 φ 254±2.0 17.5±1.0 21.5±1.0 Packing: 1 000 pcs/reel 15.9 to 19.4 Outer edge of flange 10 Data Sheet PN10231EJ01V0DS PS2525-1,-2,-4,PS2525L-1,-2,-4 Outline and Dimensions (Tape) 2.0±0.1 4.0±0.1 1.75±0.1 1.5 +0.1 –0 4.5 MAX. 16.0±0.3 7.5±0.1 1.55±0.1 8.0±0.1 10.3±0.1 5.3±0.1 4.0±0.1 0.4 Tape Direction PS2525L-1-F3 PS2525L-1-F4 Outline and Dimensions (Reel) 2.0±0.5 2.0±0.5 φ 13.0±0.2 R 1.0 φ 21.0±0.8 φ 330±2.0 φ 100±1.0 17.5±1.0 21.5±1.0 Packing: 2 000 pcs/reel 15.9 to 19.4 Outer edge of flange Data Sheet PN10231EJ01V0DS 11 PS2525-1,-2,-4,PS2525L-1,-2,-4 Outline and Dimensions (Tape) 2.0±0.1 4.0±0.1 1.75±0.1 1.5 +0.1 –0 4.5 MAX. 16.0±0.3 7.5±0.1 10.3±0.1 1.55±0.1 12.0±0.1 10.4±0.1 0.3 4.0±0.1 Tape Direction PS2525L-2-E3 PS2525L-2-E4 Outline and Dimensions (Reel) 2.0±0.5 330±2.0 2.0±0.5 13.0±0.2 R 1.0 21.0±0.8 17.5±1.0 21.5±1.0 100±1.0 Packing: 1 000 pcs/reel 15.9 to 19.4 Outer edge of flange 12 Data Sheet PN10231EJ01V0DS PS2525-1,-2,-4,PS2525L-1,-2,-4 NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering • Peak reflow temperature • Time of peak reflow temperature • Time of temperature higher than 220°C • Time to preheat temperature from 120 to 180°C • Number of reflows • Flux 260°C or below (package surface temperature) 10 seconds or less 60 seconds or less 120±30 s Three Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Recommended Temperature Profile of Infrared Reflow Package Surface Temperature T (˚C) (heating) to 10 s 260˚C MAX. 220˚C to 60 s 180˚C 120˚C 120±30 s (preheating) Time (s) (2) Wave soldering • Temperature • Time • Preheating conditions • Number of times • Flux 260°C or below (molten solder temperature) 10 seconds or less 120°C or below (package surface temperature) One (Allowed to be dipped in solder including plastic mold portion.) Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Cautions • Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between collector-emitters at startup, the output side may enter the on state, even if the voltage is within the absolute maximum ratings. Data Sheet PN10231EJ01V0DS 13 PS2525-1,-2,-4,PS2525L-1,-2,-4 USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity. 14 Data Sheet PN10231EJ01V0DS 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Lead (Pb) Mercury Cadmium Hexavalent Chromium PBB PBDE Concentration Limit per RoHS (values are not yet fixed) < 1000 PPM < 1000 PPM < 100 PPM < 1000 PPM < 1000 PPM < 1000 PPM Concentration contained in CEL devices -A Not Detected Not Detected Not Detected Not Detected Not Detected Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.