PS2533-1_03

PHOTOCOUPLER PS2533-1,-2,-4,PS2533L-1,-2,-4 HIGH COLLECTOR TO EMITTER VOLTATGE HIGH ISOLATION VOLTAGE MULTI PHOTOCOUPLER SERIES DESCRIPTION The PS2533-1, -2, -4 and PS2533L-1, -2, -4 are optically coupled isolators containing a GaAs light emitting diode and an NPN silicon darlington connected phototransistor. The PS2533-1, -2, -4 are in a plastic DIP (Dual In-line Package) and the PS2533L-1, -2, -4 are lead bending type (Gull-wing) for surface mount. −NEPOC Series− FEATURES • High collector to emitter voltage (VCEO = 350 V) • High Isolation voltage (BV = 5 000 Vr.m.s.) • High current transfer ratio (CTR = 4 000 % TYP.) • High-speed switching (tr, tf = 100 µs TYP.) • Ordering number of tape product: PS2533L-1-E3, E4, F3, F4, PS2533L-2-E3, E4 • Safety standards • UL approved: File No. E72422 (S) • BSI approved: No. 8221/8222 • CSA approved: No. CA 101391 • NEMKO approved: No. P98101708 • SEMKO approved: No. 9824187/01-02 • DEMKO approved: No. 307863 • FIMKO approved: No. F1 11397 • VDE0884 approved (Option) APPLICATIONS • Telephone, Exchange equipment • FAX/MODEM Document No. PN10233EJ01V0DS (1st edition) (Previous No. P11435EJ6V0DS00) Date Published February 2003 CP(K) The mark shows major revised points. PS2533-1,-2,-4,PS2533L-1,-2,-4 PACKAGE DIMENSIONS (Unit : mm) DIP Type (New package) PS2533-1 4.6±0.35 4 TOP VIEW 3 1. Anode 2. Cathode 3. Emitter 4. Collector 6.5±0.5 1 2 7.62 3.2±0.4 4.15±0.4 3.5±0.3 1.25±0.15 0 to 15˚ +0.1 0.25 –0.05 0.50±0.10 0.25 M 2.54 Caution New package 1-ch only DIP Type PS2533-1 4.6±0.5 4 TOP VIEW 3 1. Anode 2. Cathode 3. Emitter 4. Collector PS2533-2 9.7±0.5 8 7 TOP VIEW 6 5 1, 3. Anode 2, 4. Cathode 5, 7. Emitter 6, 8. Collector 6.5±0.5 6.5±0.5 1 2 7.62 1 2 34 7.62 3.3±0.5 4.15±0.4 3.3±0.5 4.15±0.4 3.5±0.3 3.5±0.3 1.25±0.15 0 to 15˚ +0.1 0.25 –0.05 0.50±0.10 0.25 M 1.25±0.15 2.54 0.50±0.10 0.25 M 0 to 15˚ +0.1 0.25 –0.05 2.54 PS2533-4 19.8±0.5 TOP VIEW 16 15 14 13 12 11 10 9 6.5±0.5 1 2 3 7.62 3.3±0.5 4.15±0.4 3.5±0.3 45678 1, 3, 5, 7. Anode 2, 4, 6, 8. Cathode 9, 11, 13, 15. Emitter 10, 12, 14, 16. Collector 1.25±0.15 2.54 0.50±0.10 0.25 M 0 to 15˚ +0.1 0.25 –0.05 2 Data Sheet PN10233EJ01V0DS PS2533-1,-2,-4,PS2533L-1,-2,-4 Lead Bending Type (New package) PS2533L-1 4.6±0.35 TOP VIEW 4 3 1. Anode 2. Cathode 3. Emitter 4. Collector 6.5±0.5 1 0.25 +0.1 –0.05 2 3.5±0.3 1.25±0.15 0.25 M 2.54 0.15 0.9±0.25 9.60±0.4 Caution New package 1-ch only Lead Bending Type PS2533L-1 4.6±0.5 0.1 +0.1 –0.05 PS2533L-2 9.7±0.5 TOP VIEW 4 3 TOP VIEW 8 7 6 5 1, 3. Anode 2, 4. Cathode 5, 7. Emitter 6, 8. Collector 1 2 3 4 6.5±0.5 1 2 6.5±0.5 1. Anode 2. Cathode 3. Emitter 4. Collector 0.25 +0.1 –0.05 0.25 +0.1 –0.05 0.1 +0.1 –0.05 3.5±0.3 3.5±0.3 1.25±0.15 0.25 M 2.54 0.15 0.9±0.25 9.60±0.4 1.25±0.15 0.25 M 2.54 0.15 0.9±0.25 9.60±0.4 PS2533L-4 19.8±0.5 TOP VIEW 16 15 14 13 12 11 10 9 6.5±0.5 1 0.25 +0.1 –0.05 2345678 1, 3, 5, 7. Anode 2, 4, 6, 8. Cathode 9, 11, 13, 15. Emitter 10, 12, 14, 16. Collector 3.5±0.3 1.25±0.15 0.25 M 2.54 0.15 0.9±0.25 9.60±0.4 0.1 +0.1 –0.05 0.1 +0.1 –0.05 Data Sheet PN10233EJ01V0DS 3 PS2533-1,-2,-4,PS2533L-1,-2,-4 MARKING EXAMPLE PS2533-1 No. 1 pin Mark No. 1 pin Mark PS2533-2, -4 2533 M 003 Assembly Lot PS2533-2 M 003 Country Assembled Type Number Assembly Lot M 0 03 M 0 03 Week Assembled Year Assembled (Last 1 Digit) In-house Code CTR Rank Code Week Assembled Year Assembled (Last 1 Digit) In-house Code CTR Rank Code Package Standard PKG New PKG Made in Japan Made in Taiwan Package Standard PKG New PKG Made in Japan Made in Taiwan Blank E F Blank F 4 Data Sheet PN10233EJ01V0DS PS2533-1,-2,-4,PS2533L-1,-2,-4 ORDERING INFORMATION (Solder Contains Lead) Part Number Package Packing Style Safety Standard Approval PS2533-1 PS2533L-1 PS2533L-1-E3 PS2533L-1-E4 PS2533L-1-F3 PS2533L-1-F4 PS2533-2 PS2533L-2 PS2533L-2-E3 PS2533L-2-E4 PS2533-4 PS2533L-4 PS2533-1-V PS2533L-1-V PS2533L-1-V-E3 PS2533L-1-V-E4 PS2533L-1-V-F3 PS2533L-1-V-F4 PS2533L-2-V PS2533L-2-V PS253L-2-V-E3 PS2533L-2-V-E4 PS2533-4-V PS2533L-4-V 16-pin DIP Magazine case 20 pcs PS2533-4 Embossed Tape 1 000 pcs/reel 8-pin DIP Magazine case 45 pcs PS2533-2 Embossed Tape 2 000 pcs/reel Embossed Tape 1 000 pcs/reel 4-pin DIP Magazine case 100 pcs VDE0884 approved products (Option) PS2533-1 16-pin DIP Magazine case 20 pcs PS2533-4 Embossed Tape 1 000 pcs/reel 8-pin DIP Magazine case 45 pcs PS2533-2 Embossed Tape 2 000 pcs/reel Embossed Tape 1 000 pcs/reel 4-pin DIP Magazine case 100 pcs Standard products (UL, CSA, BSI, NEMKO, SEMKO, DEMKO, FIMKO approved) Application Part Number PS2533-1 *1 *1 For the application of the Safety Standard, following part number should be used. Data Sheet PN10233EJ01V0DS 5 PS2533-1,-2,-4,PS2533L-1,-2,-4 ORDERING INFORMATION (Pb-Free) Part Number Package Packing Style Safety Standard Approval PS2533-1-A PS2533L-1-A PS2533L-1-E3-A PS2533L-1-E4-A PS2533L-1-F3-A PS2533L-1-F4-A PS2533-2-A PS2533L-2-A PS2533L-2-E3-A PS2533L-2-E4-A PS2533-4-A PS2533L-4-A PS2533-1-V-A PS2533L-1-V-A PS2533L-1-V-E3-A PS2533L-1-V-E4-A PS2533L-1-V-F3-A PS2533L-1-V-F4-A PS2533L-2-V-A PS2533L-2-V-A PS253L-2-V-E3-A PS2533L-2-V-E4-A PS2533-4-V-A PS2533L-4-V-A 16-pin DIP Magazine case 20 pcs PS2533-4 Embossed Tape 1 000 pcs/reel 8-pin DIP Magazine case 45 pcs PS2533-2 Embossed Tape 2 000 pcs/reel Embossed Tape 1 000 pcs/reel 4-pin DIP Magazine case 100 pcs VDE0884 approved products (Option) PS2533-1 16-pin DIP Magazine case 20 pcs PS2533-4 Embossed Tape 1 000 pcs/reel 8-pin DIP Magazine case 45 pcs PS2533-2 Embossed Tape 2 000 pcs/reel Embossed Tape 1 000 pcs/reel 4-pin DIP Magazine case 100 pcs Standard products (UL, CSA, BSI, NEMKO, SEMKO, DEMKO, FIMKO approved) Application Part Number PS2533-1 *1 *1 For the application of the Safety Standard, following part number should be used. 6 Data Sheet PN10233EJ01V0DS PS2533-1,-2,-4,PS2533L-1,-2,-4 ABSOLUTE MAXIMUM RATINGS (TA = 25 °C, unless otherw ise specified) Ratings Parameter Symbol PS2533-1, PS2533L-1 80 6 1.5 150 1 350 0.6 150 3.0 300 5 000 −55 to +100 −55 to +150 2.4 240 1.2 120 PS2533-2, -4, PS2533L-2, 4 Unit Diode Forward Current (DC) Reverse Voltage Power Dissipation Derating Power Dissipation Peak Forward Current *1 IF VR mA V mW°C mW/ch A V V mA/ch mW/°C mW/ch Vr.m.s. °C °C ∆PD/°C PD IFP VCEO VECO IC Transistor Collector to Emitter Voltage Emitter to Collector Voltage Collector Current Power Dissipation Derating Power Dissipation ∆PC/°C PC BV TA Tstg Isolation Voltage *2 Operating Ambient Temperature Storage Temperature *1 PW = 100 µs, Duty Cycle = 1 % *2 AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and output Data Sheet PN10233EJ01V0DS 7 PS2533-1,-2,-4,PS2533L-1,-2,-4 ELECTRICAL CHARACTERISTICS (TA = 25 °C) Parameter Diode Forward Voltage Reverse Current Terminal Capacitance Transistor Coupled Collector to Emitter Dark Current Current Transfer Ratio (IC/IF) Collector Saturation Voltage Isolation Resistance Isolation Capacitance Rise Time Fall Time *1 Symbol VF IR Ct ICEO CTR VCE(sat) RI-O CI-O tr tf IF = 10 mA VR = 5 V Conditions MIN. TYP. 1.15 MAX. 1.40 5 Unit V µA pF V = 0 V, f = 1.0 MHz VCE = 350 V, IF = 0 mA IF = 1 mA, VCE = 2 V IF = 1 mA, IC = 2 mA VI-O = 1.0 kVDC V = 0 V, f = 1.0 MHz VCC = 5 V, IC = 10 mA, RL = 100 Ω 10 11 30 400 1 500 4 000 6 500 1.0 nA % V Ω 0.6 100 100 pF µs *1 *1 Test circuit for switching time Pulse input (PW = 1 ms, Duty cycle = 1/10) IF 50 Ω VOUT RL = 100 Ω VCC 8 Data Sheet PN10233EJ01V0DS PS2533-1,-2,-4,PS2533L-1,-2,-4 TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherw ise specified) DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE Transistor Power Dissipation PC (mW) 150 400 TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE Diode Power Dissipation PD (mW) 100 PS2533-2, -4 PS2533L-2, -4 50 PS2533-1 PS2533L-1 1.5 mW/˚C 300 PS2533-1 PS2533L-1 200 PS2533-2, -4 PS2533L-2, -4 100 2.4 mW/˚C 3.0 mW/˚C 1.2 mW/˚C 0 25 50 75 100 125 150 0 25 50 75 100 125 150 Ambient Temperature TA (˚C) Ambient Temperature TA (˚C) FORWARD CURRENT vs. FORWARD VOLTAGE 100 TA = +100 ˚C +75 ˚C +50 ˚C +25 ˚C 0 ˚C –25 ˚C –55 ˚C COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE 160 140 5.0 4.5 mA mA mA 4.0 mA 3.5 mA 3.0 10 Collector Current IC (mA) Forward Current IF (mA) 120 100 80 60 40 20 1 mA 2.5 A 2.0 m 1.5 mA 1.0 mA 0.1 IF = 0.5 mA 1 2 3 4 5 6 7 8 0.01 0.6 0.8 1.0 1.2 1.4 1.6 0 Forward Voltage VF (V) Collector to Emitter Voltage VCE (V) COLLECTOR TO EMITTER DARK CURRENT vs. AMBIENT TEMPERATURE Collector to Emitter Dark Current ICEO (A) 10 µ 1µ 100 n 10 n 1n 100 p –50 –25 0 25 50 75 100 VCE = 350 V COLLECTOR CURRENT vs. COLLECTOR SATURATION VOLTAGE 500 100 50 10 5 1 0.5 0.1 0.0 mA IF = 5.0 A 2.0 m 1.0 mA 0.5 mA Collector Current IC (mA) 0.2 0.4 0.6 0.8 1.0 1.2 Ambient Temperature TA (˚C) Collector Saturation Voltage VCE(sat) (V) Data Sheet PN10233EJ01V0DS 9 PS2533-1,-2,-4,PS2533L-1,-2,-4 NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE Normalized Current Transfer Ratio CTR CURRENT TRANSFER RATIO vs. FORWARD CURRENT 5 000 Current Transfer Ratio CTR (%) 1.2 1.0 0.8 0.6 0.4 0.2 0.0 ;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;; Normalized to 1.0 at TA = 25 ˚C, IF = 1 mA, VCE = 2 V 50 75 –50 –25 0 25 100 Ambient Temperature TA (˚C) VCE = 2 V Sample A B 4 000 3 000 2 000 1 000 0 0.1 0.5 1 5 10 15 Forward Current IF (mA) SWITCHING TIME vs. LOAD RESISTANCE 500 VCC = 10 V, IC = 10 mA 5 tr 0 Normalized Gain Gv FREQUENCY RESPONSE Switching Time t (µs) 100 50 td tf 10 5 ts 1 20 –5 –10 R L = 1 kΩ 100 Ω 10 Ω VCE = 4 V, Vin = 0.1 Vp-p –15 –20 –25 1 kΩ 1 µF Vin 47 Ω 0.1 RL Vout 1 10 100 50 100 200 500 1k 2k –30 0.01 Load Resistance RL (Ω) Frequency f (kHz) LONG TERM CTR DEGRADATION 1.2 1.0 CTR (Relative Value) 0.8 0.6 0.4 0.2 0.0 10 IF = 1 mA, TA = 25 ˚C IF = 1 mA, TA = 60 ˚C 102 103 104 105 106 Time (Hr) Remark The graphs indicate nominal characteristics. 10 Data Sheet PN10233EJ01V0DS PS2533-1,-2,-4,PS2533L-1,-2,-4 TAPING SPECIFICATIONS (Unit : mm) Outline and Dimensions (Tape) 2.0±0.1 4.0±0.1 1.75±0.1 φ 1.5 +0.1 –0 4.5 MAX. 16.0±0.3 7.5±0.1 1.55±0.1 8.0±0.1 10.3±0.1 5.3±0.1 4.0±0.1 0.4 Tape Direction PS2533L-1-E3 PS2533L-1-E4 Outline and Dimensions (Reel) 2.0±0.5 2.0±0.5 φ 13.0±0.2 R 1.0 φ 21.0±0.8 φ 80.0±1.0 φ 254±2.0 17.5±1.0 21.5±1.0 Packing: 1 000 pcs/reel 15.9 to 19.4 Outer edge of flange Data Sheet PN10233EJ01V0DS 11 PS2533-1,-2,-4,PS2533L-1,-2,-4 Outline and Dimensions (Tape) 2.0±0.1 4.0±0.1 1.75±0.1 1.5 +0.1 –0 4.5 MAX. 16.0±0.3 7.5±0.1 1.55±0.1 8.0±0.1 10.3±0.1 5.3±0.1 4.0±0.1 0.4 Tape Direction PS2533L-1-F3 PS2533L-1-F4 Outline and Dimensions (Reel) 2.0±0.5 2.0±0.5 φ 13.0±0.2 R 1.0 φ 21.0±0.8 φ 330±2.0 φ 100±1.0 17.5±1.0 21.5±1.0 Packing: 2 000 pcs/reel 15.9 to 19.4 Outer edge of flange 12 Data Sheet PN10233EJ01V0DS PS2533-1,-2,-4,PS2533L-1,-2,-4 Outline and Dimensions (Tape) 2.0±0.1 4.0±0.1 1.75±0.1 1.5 +0.1 –0 4.5 MAX. 16.0±0.3 7.5±0.1 10.3±0.1 1.55±0.1 12.0±0.1 10.4±0.1 0.3 4.0±0.1 Tape Direction PS2533L-2-E3 PS2533L-2-E4 Outline and Dimensions (Reel) 2.0±0.5 330±2.0 2.0±0.5 13.0±0.2 R 1.0 21.0±0.8 17.5±1.0 21.5±1.0 100±1.0 Packing: 1 000 pcs/reel 15.9 to 19.4 Outer edge of flange Data Sheet PN10233EJ01V0DS 13 PS2533-1,-2,-4,PS2533L-1,-2,-4 NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering • Peak reflow temperature • Time of peak reflow temperature • Time of temperature higher than 220°C • Time to preheat temperature from 120 to 180°C • Number of reflows • Flux 260°C or below (package surface temperature) 10 seconds or less 60 seconds or less 120±30 s Three Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Recommended Temperature Profile of Infrared Reflow Package Surface Temperature T (˚C) (heating) to 10 s 260˚C MAX. 220˚C to 60 s 180˚C 120˚C 120±30 s (preheating) Time (s) (2) Wave soldering • Temperature • Time • Preheating conditions • Number of times • Flux 260°C or below (molten solder temperature) 10 seconds or less 120°C or below (package surface temperature) One (Allowed to be dipped in solder including plastic mold portion.) Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Cautions • Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between collector-emitters at startup, the output side may enter the on state, even if the voltage is within the absolute maximum ratings. 14 Data Sheet PN10233EJ01V0DS PS2533-1,-2,-4,PS2533L-1,-2,-4 USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity. Data Sheet PN10233EJ01V0DS 15 PS2533-1,-2,-4,PS2533L-1,-2,-4 SPECIFICATION OF VDE MARKS LICENSE DOCUMENT (VDE0884) Parameter Application classification (DIN VDE 0109) for rated line voltages ≤ 300 Vr.m.s. for rated line voltages ≤ 600 Vr.m.s. Climatic test class (DIN IEC 68 Teil 1/09.80) Dielectric strength maximum operating isolation voltage Test voltage (partial discharge test, procedure a for type test and random test) Upr = 1.2 × UIORM, Pd < 5 pC Test voltage (partial discharge test, procedure b for all devices test) Upr = 1.6 × UIORM, Pd < 5 pC Highest permissible overvoltage Degree of pollution (DIN VDE 0109) Clearance distance Creepage distance Comparative tracking index (DIN IEC 112/VDE 0303 part 1) Material group (DIN VDE 0109) Storage temperature range Operating temperature range Isolation resistance, minimum value VIO = 500 V dc at TA = 25 °C VIO = 500 V dc at TA MAX. at least 100 °C Safety maximum ratings (maximum permissible in case of fault, see thermal derating curve) Package temperature Current (input current IF, Psi = 0) Power (output or total power dissipation) Isolation resistance VIO = 500 V dc at TA = 175 °C (Tsi) Ris MIN. 10 9 Symbol Speck Unit IV III 55/100/21 UIORM Upr 890 1 068 Vpeak Vpeak Upr 1 424 Vpeak UTR 6 000 2 > 7.0 > 7.0 Vpeak mm mm CTI 175 III a Tstg TA −55 to +150 –55 to +100 12 11 °C °C Ω Ω Ris MIN. Ris MIN. 10 10 Tsi Isi Psi 175 400 700 °C mA mW Ω 16 Data Sheet PN10233EJ01V0DS PS2533-1,-2,-4,PS2533L-1,-2,-4 APPLICATION FOR TELEPHONE (EXAMPLE) LINE Bell Ringing Signal (75 Vr.m.s., 16 Hz) PS2505/PS2506 PS2705/PS2707 PS2805 etc. VCC Bell Ringing Detect PS2521 PS2525 Line Observe VCC Dial Pulse PS2532/PS2533 Generator PS2732/PS2733 PS2832/PS2833 Dialer Circuit CPU OCMOS FET PS7xxx Speech Circuit IN OUT Data Sheet PN10233EJ01V0DS 17 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Lead (Pb) Mercury Cadmium Hexavalent Chromium PBB PBDE Concentration Limit per RoHS (values are not yet fixed) < 1000 PPM < 1000 PPM < 100 PPM < 1000 PPM < 1000 PPM < 1000 PPM Concentration contained in CEL devices -A Not Detected Not Detected Not Detected Not Detected Not Detected Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.