PS2561AL-1

PHOTOCOUPLER PS2561A-1,PS2561AL-1,PS2561AL1-1,PS2561AL2-1 HIGH ISOLATION VOLTAGE SINGLE TRANSISTOR TYPE MULTI PHOTOCOUPLER SERIES −NEPOC Series− DESCRIPTION The PS2561A-1 is an optically coupled isolator containing a GaAs light emitting diode and an NPN silicon phototransistor to realize an excellent cost performance. The PS2561A-1 is in a plastic DIP (Dual In-line Package) and the PS2561AL-1 is lead bending type (Gull-wing) for surface mount. The PS2561AL1-1 is lead bending L1 type and the PS2561AL2-1 is lead bending L2 type (Gull-wing). FEATURES • High isolation voltage (BV = 5 000 Vr.m.s.) • Ordering number of taping product: PS2561AL-1-E3, E4, F3, F4 : PS2561AL2-1-E3, E4 • Pb-Free product • Safety standards • • UL, BSI, CSA, NEMKO, DEMKO, SEMKO, FIMKO, approved DIN EN60747-5-2 (VDE0884 Part2) approved (option) 1 2 4 3 1. Anode 2. Cathode 3. Emitter 4. Collector PIN CONNECTION (Top View) APPLICATIONS • Power supply • Telephone/FAX. • FA/OA equipment • Programmable logic controller Document No. PN10222EJ03V0DS (3rd edition) Date Published November 2004 CP(K) The mark shows major revised points. PS2561A-1,PS2561AL-1,PS2561AL1-1,PS2561AL2-1 PACKAGE DIMENSIONS (UNIT : mm) DIP Type PS2561A-1 4.6±0.35 Long Creepage Distance PS2561AL1-1 4.6±0.35 43 6.5±0.5 4 6.5±0.5 3 7.62 3.2±0.4 4.15±0.4 12 3.5±0.3 1 3.15 3.85 ±0.35 ±0.4 3.5 ±0.3 2 10.16 1.25±0.15 0 to 15˚ +0.1 0.25 –0.05 0.50±0.10 0.25 M 2.54 0.50±0.1 0.25 M 2.54 0.25–0.05 +0.1 1.25±0.15 0 to 15˚ Lead Bending Type (Gull-Wing) PS2561AL-1 4.6±0.35 Long Creepage Distance (Gull-Wing) PS2561AL2-1 4.6±0.35 4 6.5±0.5 3 6.5±0.5 4 3 0.25±0.2 0.25 +0.1 –0.05 3.5±0.3 0.1 +0.1 –0.05 3.5±0.3 1 2 1.25±0.15 0.25 M 2.54 0.15 0.9±0.25 9.60±0.4 1.25±0.15 0.25 M 2.54 0.25 0.9±0.25 10.16 11.8–0.5 +0.2 2 Data Sheet PN10222EJ03V0DS +0.1 1 2 0.25–0.05 PS2561A-1,PS2561AL-1,PS2561AL1-1,PS2561AL2-1 MARKING EXAMPLE No. 1 pin Mark 2561A N 301 Assembly Lot N 3 01 Week Assembled Year Assembled (Last 1 Digit) In-house Code CTR Rank Code Package New PKG Solder Plating Specification Solder contains lead Pb-Free Made in Japan Made in Taiwan E J H K Data Sheet PN10222EJ03V0DS 3 PS2561A-1,PS2561AL-1,PS2561AL1-1,PS2561AL2-1 ORDERING INFORMATION (1/2) Part Number Order Number Solder Plating Specification Solder contains lead Packing Style Safety Standard Approval Standard products (UL, CSA, BSI, NEMKO, DEMKO, SEMKO, FIMKO Embossed Tape 1 000 pcs/reel approved) Application Part *1 Number PS2561A-1 PS2561A-1 PS2561AL-1 PS2561AL1-1 PS2561AL2-1 PS2561AL-1-E3 PS2561AL-1-E4 PS2561AL2-1-E3 PS2561AL2-1-E4 PS2561AL-1-F3 PS2561AL-1-F4 PS2561A-1-V PS2561AL-1-V PS2561AL1-1-V PS2561AL2-1-V PS2561AL-1-V-E3 PS2561AL-1-V-E4 PS2561AL2-1-V-E3 PS2561AL2-1-V-E4 PS2561AL-1-V-F3 PS2561AL-1-V-F4 PS2561A-1 PS2561AL-1 PS2561AL1-1 PS2561AL2-1 PS2561AL-1-E3 PS2561AL-1-E4 PS2561AL2-1-E3 PS2561AL2-1-E4 PS2561AL-1-F3 PS2561AL-1-F4 PS2561A-1 PS2561AL-1 PS2561AL1-1 PS2561AL2-1 PS2561AL-1-E3 PS2561AL-1-E4 PS2561AL2-1-E3 PS2561AL2-1-E4 PS2561AL-1-F3 PS2561AL-1-F4 PS2561A-1-V PS2561AL-1-V PS2561AL1-1-V PS2561AL2-1-V PS2561AL-1-V-E3 PS2561AL-1-V-E4 PS2561AL2-1-V-E3 PS2561AL2-1-V-E4 PS2561AL-1-V-F3 PS2561AL-1-V-F4 PS2561A-1-A PS2561AL-1-A PS2561AL1-1-A PS2561AL2-1-A PS2561AL-1-E3-A PS2561AL-1-E4-A PS2561AL2-1-E3-A PS2561AL2-1-E4-A PS2561AL-1-F3-A PS2561AL-1-F4-A Magazine case 100 pcs Embossed Tape 1 000 pcs/reel Embossed Tape 2 000 pcs/reel Magazine case 100 pcs DIN EN60747-5-2 (VDE0884 Part2) Approved products (option) Embossed Tape 1 000 pcs/reel Embossed Tape 1 000 pcs/reel Embossed Tape 2 000 pcs/reel Pb-Free Magazine case 100 pcs Standard products (UL, CSA, BSI, NEMKO, DEMKO, SEMKO, FIMKO Embossed Tape 1 000 pcs/reel approved) Embossed Tape 1 000 pcs/reel Embossed Tape 2 000 pcs/reel *1 For the application of the Safety Standard, following part number should be used. 4 Data Sheet PN10222EJ03V0DS PS2561A-1,PS2561AL-1,PS2561AL1-1,PS2561AL2-1 ORDERING INFORMATION (2/2) Part Number Order Number Solder Plating Specification PS2561A-1-V PS2561AL-1-V PS2561AL1-1-V PS2561AL2-1-V PS2561AL-1-V-E3 PS2561AL-1-V-E4 PS2561AL2-1-V-E3 PS2561AL2-1-V-E4 PS2561AL-1-V-F3 PS2561AL-1-V-F4 PS2561A-1-V-A PS2561AL-1-V-A PS2561AL1-1-V-A PS2561AL2-1-V-A PS2561AL-1-V-E3-A PS2561AL-1-V-E4-A PS2561AL2-1-V-E3-A PS2561AL2-1-V-E4-A PS2561AL-1-V-F3-A PS2561AL-1-V-F4-A Embossed Tape 2 000 pcs/reel Embossed Tape 1 000 pcs/reel Embossed Tape 1 000 pcs/reel Pb-Free Magazine case 100 pcs Packing Style Safety Standard Approval Application Part *1 Number DIN EN60747-5-2 (VDE0884 Part2) Approved products (option) PS2561A-1 *1 For the application of the Safety Standard, following part number should be used. Data Sheet PN10222EJ03V0DS 5 PS2561A-1,PS2561AL-1,PS2561AL1-1,PS2561AL2-1 ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified) Parameter Diode Reverse Voltage Forward Current (DC) Power Dissipation Derating Power Dissipation Peak Forward Current Transistor *1 Symbol VR IF Ratings 6 30 1.5 150 0.5 70 5 30 1.5 150 5 000 −55 to +100 −55 to +150 Unit V mA mW/°C mW A V V mA mW/°C mW Vr.m.s. °C °C ∆PD/°C PD IFP VCEO VECO IC Collector to Emitter Voltage Emitter to Collector Voltage Collector Current Power Dissipation Delay Power Dissipation ∆PC/°C PC BV TA Tstg Isolation Voltage *2 Operating Ambient Temperature Storage Temperature *1 PW = 100 µs, Duty Cycle = 1% *2 AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output 6 Data Sheet PN10222EJ03V0DS PS2561A-1,PS2561AL-1,PS2561AL1-1,PS2561AL2-1 ELECTRICAL CHARACTERISTICS (TA = 25°C) Parameter Diode Forward Voltage Reverse Current Terminal Capacitance Transistor Collector to Emitter Dark Current Coupled Current Transfer Ratio (IC/IF) *1 Symbol VF IR Ct ICEO IF = 10 mA VR = 5 V Conditions MIN. TYP. 1.2 MAX. 1.4 5 Unit V µA pF V = 0 V, f = 1.0 MHz VCE = 70 V, IF = 0 mA 10 100 nA CTR IF = 5 mA, VCE = 5 V 50 300 % Collector Saturation Voltage Isolation Resistance Isolation Capacitance Rise Time Fall Time *2 VCE (sat) IF = 10 mA, IC = 2 mA 11 0.13 0.3 V Ω RI-O CI-O tr tf VI-O = 1.0 kVDC V = 0 V, f = 1.0 MHz VCC = 10 V, IC = 2 mA, RL = 100 Ω 10 0.4 5 7 pF µs *2 *1 CTR rank N: H: Q: W: 50 to 300 (%) 80 to 160 (%) 100 to 200 (%) 130 to 260 (%) *2 Test circuit for switching time Pulse Input PW = 100 µs Duty Cycle = 1/10 VCC IF 50 Ω VOUT RL = 100 Ω Data Sheet PN10222EJ03V0DS 7 PS2561A-1,PS2561AL-1,PS2561AL1-1,PS2561AL2-1 TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise specified) DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE Transistor Power Dissipation PC (mW) 200 200 1.5 mW/˚C 150 TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE Diode Power Dissipation PD (mW) 1.5 mW/˚C 150 100 100 50 50 0 25 50 75 100 125 0 25 50 75 100 125 Ambient Temperature TA (˚C) Ambient Temperature TA (˚C) FORWARD CURRENT vs. FORWARD VOLTAGE 100 50 25 COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE Forward Current IF (mA) 10 5 Collector Current IC (mA) TA = +100˚C +60˚C +25˚C IF = 10 mA 20 15 IF = 5 mA 1 0.5 0˚C –25˚C –55˚C 10 5 0.1 0.05 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 0 2 4 6 IF = 2 mA IF = 1 mA 8 10 Forward Voltage VF (V) Collector to Emitter Voltage VCE (V) COLLECTOR TO EMITTER DARK CURRENT vs. AMBIENT TEMPERATURE Collector to Emitter Dark Current ICEO (nA) 10 000 COLLECTOR CURRENT vs. COLLECTOR SATURATION VOLTAGE 10 IF = 10 mA IF = 5 mA IF = 2 mA 1 000 VCE = 70 V 100 Collector Current IC (mA) VCE = 24 V 1 IF = 1 mA 10 1 0 25 50 75 100 0.1 0 0.2 0.4 0.6 0.8 1.0 Ambient Temperature TA (˚C) Collector Saturation Voltage VCE(sat) (V) Remark The graphs indicate nominal characteristics. Data Sheet PN10222EJ03V0DS 8 PS2561A-1,PS2561AL-1,PS2561AL1-1,PS2561AL2-1 NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE Normalized Current Transfer Ratio CTR CURRENT TRANSFER RATIO vs. FORWARD CURRENT 300 Current Transfer Ratio CTR (%) 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 –50 Normalized to 1.0 at TA = 25˚C, IF = 5 mA, VCE = 5 V CTR:130% CTR:270% –25 0 25 50 75 100 250 200 150 100 50 VCE = 5 V, n=2 Sample A B 0 0.01 0.1 1 10 100 Ambient Temperature TA (˚C) Forward Current IF (mA) SWITCHING TIME vs. LOAD RESISTANCE 100 IC = 2 mA, VCC = 10 V, CTR = 216% Switching Time t ( µ s) Switching Time t ( µ s) SWITCHING TIME vs. LOAD RESISTANCE 1 000 IF = 5 mA, VCC = 5 V, CTR = 216% tf tr tf 100 ts 10 td ts 1 10 tr 0.1 10 100 1 000 10 000 1 1 td 10 Load Resistance RL (kΩ) 100 Load Resistance RL (Ω) FREQUENCY RESPONSE 5 0 –5 100 Ω –10 300 Ω –15 –20 RL = 1 kΩ IF = 5 mA, VCE = 5 V LONG TERM CTR DEGRADATION 1.2 IF = 5 mA (TYP.) 1.0 CTR (Relative Value) Normalized Gain GV 0.8 TA = 25˚C 0.6 0.4 0.2 0 10 TA = 60˚C –25 0.1 1 10 Frequency f (kHz) 100 1 000 102 103 104 105 Time (Hr) Remark The graphs indicate nominal characteristics. Data Sheet PN10222EJ03V0DS 9 PS2561A-1,PS2561AL-1,PS2561AL1-1,PS2561AL2-1 TAPING SPECIFICATIONS (UNIT : mm) Outline and Dimensions (Tape) 2.0±0.1 4.0±0.1 1.75±0.1 φ 1.5 +0.1 –0 4.5 MAX. 16.0±0.3 7.5±0.1 1.55±0.1 8.0±0.1 10.3±0.1 5.3±0.1 4.0±0.1 0.4 Tape Direction PS2561AL-1-E3 PS2561AL-1-E4 Outline and Dimensions (Reel) 2.0±0.5 2.0±0.5 φ 13.0±0.2 R 1.0 φ 21.0±0.8 φ 80.0±1.0 φ 254±2.0 17.5±1.0 21.5±1.0 Packing: 1 000 pcs/reel 15.9 to 19.4 Outer edge of flange 10 Data Sheet PN10222EJ03V0DS PS2561A-1,PS2561AL-1,PS2561AL1-1,PS2561AL2-1 Outline and Dimensions (Tape) 2.0±0.1 4.0±0.1 1.75±0.1 φ 1.5 +0.1 –0 4.5 MAX. 16.0±0.3 7.5±0.1 1.55±0.1 8.0±0.1 10.3±0.1 5.3±0.1 4.0±0.1 0.4 Tape Direction PS2561AL-1-F3 PS2561AL-1-F4 Outline and Dimensions (Reel) 2.0±0.5 2.0±0.5 φ 13.0±0.2 φ 330±2.0 R 1.0 φ 21.0±0.8 φ 100±1.0 17.5±1.0 21.5±1.0 Packing: 2 000 pcs/reel 15.9 to 19.4 Outer edge of flange Data Sheet PN10222EJ03V0DS 11 PS2561A-1,PS2561AL-1,PS2561AL1-1,PS2561AL2-1 Outline and Dimensions (Tape) 2.0±0.1 4.0±0.1 1.75±0.1 1.55±0.1 4.4±0.2 11.5±0.1 2.05±0.1 12.0±0.1 6.6±0.2 0.38 Tape Direction PS2561AL2-1-E3 PS2561AL2-1-E4 Outline and Dimensions (Reel) 12.35±0.15 24.0±0.3 2.0±0.5 φ 330±2.0 2.0±0.5 φ13.0±0.2 R 1.0 φ 21.0±0.8 φ 100±1.0 25.5±1.0 29.5±1.0 Packing: 1 000 pcs/reel 23.9 to 27.4 Outer edge of flange 12 Data Sheet PN10222EJ03V0DS PS2561A-1,PS2561AL-1,PS2561AL1-1,PS2561AL2-1 NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering • Peak reflow temperature • Time of peak reflow temperature • Time of temperature higher than 220°C • Time to preheat temperature from 120 to 180°C • Number of reflows • Flux 260°C or below (package surface temperature) 10 seconds or less 60 seconds or less 120±30 s Three Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Recommended Temperature Profile of Infrared Reflow Package Surface Temperature T (˚C) (heating) to 10 s 260˚C MAX. 220˚C to 60 s 180˚C 120˚C 120±30 s (preheating) Time (s) (2) Wave soldering • Temperature • Time • Preheating conditions • Number of times • Flux 260°C or below (molten solder temperature) 10 seconds or less 120°C or below (package surface temperature) One (Allowed to be dipped in solder including plastic mold portion.) Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Soldering by soldering iron • Peak temperature (lead part temperature) • Time (each pins) • Flux 350°C or below 3 seconds or less Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead. (b) Please be sure that the temperature of the package would not be heated over 100°C. Data Sheet PN10222EJ03V0DS 13 PS2561A-1,PS2561AL-1,PS2561AL1-1,PS2561AL2-1 (4) Cautions • Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between collector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings. USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity. 14 Data Sheet PN10222EJ03V0DS 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Lead (Pb) Mercury Cadmium Hexavalent Chromium PBB PBDE Concentration Limit per RoHS (values are not yet fixed) < 1000 PPM < 1000 PPM < 100 PPM < 1000 PPM < 1000 PPM < 1000 PPM Concentration contained in CEL devices -A Not Detected Not Detected Not Detected Not Detected Not Detected Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.