PHOTOCOUPLER
PS2561B-1,PS2561BL-1
PS2561BL1-1,PS2561BL2-1
DIP PHOTOCOUPLER
OPERATING AMBIENT TEMPERATURE 110C
NEPOC Series
DESCRIPTION
The PS2561B-1 is an optically coupled isolator containing a GaAs light emitting diode and an NPN silicon
phototransistor.
The PS2561B-1 is in a plastic DIP (Dual In-line Package) and the PS2561BL-1 is lead bending type (Gull-wing) for
surface mount.
The PS2561BL1-1 is lead bending type for long creepage distance.
The PS2561BL2-1 is lead bending type for long creepage distance (Gull-wing) for surface mount.
FEATURES
• Operating ambient temperature: 110C
• High Isolation voltage (BV = 5 000 Vr.m.s.)
• High collector to emitter voltage (VCEO = 80 V)
• High current transfer ratio (CTR = 200% TYP.)
• High-speed switching (tr = 3 s TYP., tf = 5 s TYP.)
• Ordering number of taping product: PS2561BL-1-F3 : 2 000 pcs/reel
: PS2561BL2-1-E3: 1 000 pcs/reel
• Pb-Free product
• Safety standards
•
UL approved: No. E72422
•
CSA approved: No. CA 101391 (CA5A, CAN/CSA-C22.2 60065, 60950)
•
BSI approved: No. 7112/7420
•
SEMKO approved: No. 903238
•
NEMKO approved: No. P09210868
•
DEMKO approved: No. 314999
•
FIMKO approved: No. FI 25119
•
DIN EN60747-5-2 (VDE0884 Part2) approved: No. 40008862 (Option)
APPLICATIONS
• Power supply
• Telephone/FAX.
• FA/OA equipment
• Programmable logic controller
Document No. PN10505EJ05V0DS (5th edition)
Date Published September 2009 NS
The mark shows major revised points.
The revised points can be easily searched by copying an "" in the PDF file and specifying it in the "Find what:" field.
PS2561B-1,PS2561BL-1,PS2561BL1-1,PS2561BL2-1
PACKAGE DIMENSIONS (UNIT : mm)
DIP Type
Long Creepage Distance
Lead Bending Type (Gull-Wing)
Long Creepage Distance (Gull-Wing)
PHOTOCOUPLER CONSTRUCTION
Parameter
Unit (MIN.)
Air Distance
7 mm
Outer Creepage Distance
7 mm
Inner Creepage Distance
4 mm
Isolation Thickness
2
0.4 mm
Data Sheet PN10505EJ05V0DS
PS2561B-1,PS2561BL-1,PS2561BL1-1,PS2561BL2-1
MARKING EXAMPLE
Data Sheet PN10505EJ05V0DS
3
PS2561B-1,PS2561BL-1,PS2561BL1-1,PS2561BL2-1
ORDERING INFORMATION
Part Number
Order Number
Solder Plating
Specification
Packing Style
Safety Standard
Approval
Application
Part Number
*1
PS2561B-1
PS2561B-1-A
PS2561BL-1
PS2561BL-1-A
(UL, CSA, BSI,
PS2561BL1-1
PS2561BL1-1-A
SEMKO, NEMKO,
PS2561BL2-1
PS2561BL2-1-A
DEMKO, FIMKO
PS2561BL-1-F3
PS2561BL-1-F3-A
Embossed Tape 2 000
pcs/reel
PS2561BL2-1-E3
PS2561BL2-1-E3-A
Embossed Tape 1 000
pcs/reel
PS2561B-1-V
PS2561B-1-V-A
Magazine case 100 pcs
PS2561BL-1-V
PS2561BL-1-V-A
(VDE0884 Part2)
PS2561BL1-1-V
PS2561BL1-1-V-A
approved
PS2561BL2-1-V
PS2561BL2-1-V-A
(Option)
PS2561BL-1-V-F3
PS2561BL-1-V-F3-A
Embossed Tape 2 000
pcs/reel
PS2561BL2-1-V-E3
PS2561BL2-1-V-E3-A
Embossed Tape 1 000
pcs/reel
PS2561B-1
PS2561B-1Y-A
Special version
PS2561BL-1
PS2561BL-1Y-A
(Pb-Free and
(UL, CSA, BSI,
PS2561BL1-1
PS2561BL1-1Y-A
Halogen Free)
SEMKO, NEMKO,
PS2561BL2-1
PS2561BL2-1Y-A
PS2561BL-1-F3
PS2561BL-1Y-F3-A
Embossed Tape 2 000
pcs/reel
PS2561BL2-1-E3
PS2561BL2-1Y-E3-A
Embossed Tape 1 000
pcs/reel
PS2561B-1-V
PS2561B-1Y-V-A
Magazine case 100 pcs
PS2561BL-1-V
PS2561BL-1Y-V-A
(VDE0884 Part2)
PS2561BL1-1-V
PS2561BL1-1Y-V-A
approved
PS2561BL2-1-V
PS2561BL2-1Y-V-A
(Option)
PS2561BL-1-V-F3
PS2561BL-1Y-V-F3-A
Embossed Tape 2 000
pcs/reel
PS2561BL2-1-V-E3
PS2561BL2-1Y-V-E3-A
Embossed Tape 1 000
pcs/reel
Pb-Free
Magazine case 100 pcs
Magazine case 100 pcs
Standard
products
approved)
DIN EN60747-5-2
Standard
products
DEMKO, FIMKO
approved)
DIN EN60747-5-2
*1 For the application of the Safety Standard, following part number should be used.
4
Data Sheet PN10505EJ05V0DS
PS2561B-1
PS2561B-1
PS2561B-1,PS2561BL-1,PS2561BL1-1,PS2561BL2-1
ABSOLUTE MAXIMUM RATINGS (TA = 25C, unless otherwise specified)
Parameter
Symbol
Ratings
Unit
Reverse Voltage
VR
6
V
Forward Current (DC)
IF
40
mA
PD/C
1.5
mW/C
PD
150
mW
IFP
1
A
Collector to Emitter Voltage
VCEO
80
V
Emitter to Collector Voltage
VECO
7
V
IC
50
mA
PC/C
1.5
mW/C
PC
150
mW
BV
5 000
Vr.m.s.
Operating Ambient Temperature
TA
–55 to +110
C
Storage Temperature
Tstg
–55 to +150
C
Diode
Power Dissipation Derating
Power Dissipation
Peak Forward Current
Transistor
*1
Collector Current
Power Dissipation Derating
Power Dissipation
Isolation Voltage
*2
*1 PW = 100 s, Duty Cycle = 1%
*2 AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output.
Pins 1-2 shorted together, 3-4 shorted together.
Data Sheet PN10505EJ05V0DS
5
PS2561B-1,PS2561BL-1,PS2561BL1-1,PS2561BL2-1
ELECTRICAL CHARACTERISTICS (TA = 25C)
Parameter
Diode
Symbol
Conditions
Forward Voltage
VF
IF = 10 mA
Reverse Current
IR
VR = 5 V
Terminal Capacitance
Ct
V = 0 V, f = 1.0 MHz
MIN.
TYP.
MAX.
Unit
1.17
1.4
V
5
A
50
Transistor
Collector to Emitter Dark
Current
ICEO
VCE = 48 V, IF = 0 mA
Coupled
Current Transfer Ratio
(IC/IF)*1
CTR
IF = 5 mA, VCE = 5 V
100
200
IF = 1 mA, VCE = 5 V
50
100
Collector Saturation
Voltage
VCE (sat)
Isolation Resistance
RI-O
VI-O = 1.0 kVDC
Isolation Capacitance
CI-O
V = 0 V, f = 1.0 MHz
*2
tr
Rise Time
*2
Fall Time
IF = 10 mA, IC = 2 mA
VCC = 10 V, IC = 2 mA, RL = 100
tf
CTR Rank
CTR (%)
Conditions
100 to 200
IF = 5 mA, VCE = 5 V
50 and larger
IF = 1 mA, VCE = 5 V
130 to 260
IF = 5 mA, VCE = 5 V
70 and larger
IF = 1 mA, VCE = 5 V
100 to 300
IF = 5 mA, VCE = 5 V
50 and larger
IF = 1 mA, VCE = 5 V
200 to 400
IF = 5 mA, VCE = 5 V
100 and larger
IF = 1 mA, VCE = 5 V
100 to 400
IF = 5 mA, VCE = 5 V
50 and larger
IF = 1 mA, VCE = 5 V
Q
W
D
L
N
*2 Test circuit for switching time
6
Data Sheet PN10505EJ05V0DS
100
nA
400
%
0.3
V
1011
0.5
pF
3
s
5
*1 CTR rank
pF
PS2561B-1,PS2561BL-1,PS2561BL1-1,PS2561BL2-1
TYPICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified)
Remark
The graphs indicate nominal characteristics.
Data Sheet PN10505EJ05V0DS
7
PS2561B-1,PS2561BL-1,PS2561BL1-1,PS2561BL2-1
Remark
8
The graphs indicate nominal characteristics.
Data Sheet PN10505EJ05V0DS
PS2561B-1,PS2561BL-1,PS2561BL1-1,PS2561BL2-1
Remark
The graph indicates nominal characteristics.
Data Sheet PN10505EJ05V0DS
9
PS2561B-1,PS2561BL-1,PS2561BL1-1,PS2561BL2-1
TAPING SPECIFICATIONS (UNIT : mm)
10
Data Sheet PN10505EJ05V0DS
PS2561B-1,PS2561BL-1,PS2561BL1-1,PS2561BL2-1
Data Sheet PN10505EJ05V0DS
11
PS2561B-1,PS2561BL-1,PS2561BL1-1,PS2561BL2-1
NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
• Peak reflow temperature
260C or below (package surface temperature)
• Time of peak reflow temperature
10 seconds or less
• Time of temperature higher than 220C
60 seconds or less
• Time to preheat temperature from 120 to 180C
12030 s
• Number of reflows
Three
• Flux
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
(2) Wave soldering
• Temperature
260C or below (molten solder temperature)
• Time
10 seconds or less
• Preheating conditions
120C or below (package surface temperature)
• Number of times
One (Allowed to be dipped in solder including plastic mold portion.)
• Flux
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
(3) Soldering by soldering iron
• Peak temperature (lead part temperature)
350C or below
• Time (each pins)
3 seconds or less
• Flux
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead.
(b) Please be sure that the temperature of the package would not be heated over 100C.
12
Data Sheet PN10505EJ05V0DS
PS2561B-1,PS2561BL-1,PS2561BL1-1,PS2561BL2-1
(4) Cautions
• Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
2. Cautions regarding noise
Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between
corrector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute
maximum ratings.
3. Measurement conditions of current transfer ratios (CTR), which differ according to photocoupler
Check the setting values before use, since the forward current conditions at CTR measurement differ according
to product.
When using products other than at the specified forward current, the characteristics curves may differ from the
standard curves due to CTR value variations or the like. Therefore, check the characteristics under the actual
operating conditions and thoroughly take variations or the like into consideration before use.
USAGE CAUTIONS
1. Protect against static electricity when handling.
2. Avoid storage at a high temperature and high humidity.
Data Sheet PN10505EJ05V0DS
13
PS2561B-1,PS2561BL-1,PS2561BL1-1,PS2561BL2-1
SPECIFICATION OF VDE MARKS LICENSE DOCUMENT
Parameter
Symbol
Climatic test class (IEC 60068-1/DIN EN 60068-1)
Spec.
Unit
55/100/21
Dielectric strength
maximum operating isolation voltage
Test voltage (partial discharge test, procedure a for type test and random test)
Upr = 1.5 UIORM, Pd 5 pC
UIORM
Upr
890
1 335
Vpeak
Vpeak
Test voltage (partial discharge test, procedure b for all devices)
Upr = 1.875 UIORM, Pd 5 pC
Upr
1 669
Vpeak
Highest permissible overvoltage
UTR
8 000
Vpeak
Degree of pollution (DIN EN 60664-1 VDE0110 Part 1)
Comparative tracking index (IEC 60112/DIN EN 60112 (VDE 0303 Part 11))
2
CTI
Material group (DIN EN 60664-1 VDE0110 Part 1)
175
III a
Storage temperature range
Tstg
–55 to +150
C
Operating temperature range
TA
–55 to +100
C
Ris MIN.
Ris MIN.
1012
1011
Tsi
Isi
Psi
175
400
700
°C
mA
mW
Ris MIN.
109
Isolation resistance, minimum value
VIO = 500 V dc at TA = 25C
VIO = 500 V dc at TA MAX. at least 100°C
Safety maximum ratings (maximum permissible in case of fault, see thermal
derating curve)
Package temperature
Current (input current IF, Psi = 0)
Power (output or total power dissipation)
Isolation resistance
VIO = 500 V dc at TA = Tsi
14
Data Sheet PN10505EJ05V0DS
PS2561B-1,PS2561BL-1,PS2561BL1-1,PS2561BL2-1
Data Sheet PN10505EJ05V0DS
15
PS2561B-1,PS2561BL-1,PS2561BL1-1,PS2561BL2-1
Caution
GaAs Products
This product uses gallium arsenide (GaAs).
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe
the following points.
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
• Do not lick the product or in any way allow it to enter the mouth.