PS2561B-1-W-A

PHOTOCOUPLER PS2561B-1,PS2561BL-1 PS2561BL1-1,PS2561BL2-1 DIP PHOTOCOUPLER OPERATING AMBIENT TEMPERATURE 110C NEPOC Series DESCRIPTION The PS2561B-1 is an optically coupled isolator containing a GaAs light emitting diode and an NPN silicon phototransistor. The PS2561B-1 is in a plastic DIP (Dual In-line Package) and the PS2561BL-1 is lead bending type (Gull-wing) for surface mount. The PS2561BL1-1 is lead bending type for long creepage distance. The PS2561BL2-1 is lead bending type for long creepage distance (Gull-wing) for surface mount. FEATURES • Operating ambient temperature: 110C • High Isolation voltage (BV = 5 000 Vr.m.s.) • High collector to emitter voltage (VCEO = 80 V) • High current transfer ratio (CTR = 200% TYP.) • High-speed switching (tr = 3 s TYP., tf = 5 s TYP.) • Ordering number of taping product: PS2561BL-1-F3 : 2 000 pcs/reel : PS2561BL2-1-E3: 1 000 pcs/reel • Pb-Free product • Safety standards • UL approved: No. E72422 • CSA approved: No. CA 101391 (CA5A, CAN/CSA-C22.2 60065, 60950) • BSI approved: No. 7112/7420 • SEMKO approved: No. 903238 • NEMKO approved: No. P09210868 • DEMKO approved: No. 314999 • FIMKO approved: No. FI 25119 • DIN EN60747-5-2 (VDE0884 Part2) approved: No. 40008862 (Option) APPLICATIONS • Power supply • Telephone/FAX. • FA/OA equipment • Programmable logic controller Document No. PN10505EJ05V0DS (5th edition) Date Published September 2009 NS The mark shows major revised points. The revised points can be easily searched by copying an "" in the PDF file and specifying it in the "Find what:" field. PS2561B-1,PS2561BL-1,PS2561BL1-1,PS2561BL2-1 PACKAGE DIMENSIONS (UNIT : mm) DIP Type Long Creepage Distance Lead Bending Type (Gull-Wing) Long Creepage Distance (Gull-Wing) PHOTOCOUPLER CONSTRUCTION Parameter Unit (MIN.) Air Distance 7 mm Outer Creepage Distance 7 mm Inner Creepage Distance 4 mm Isolation Thickness 2 0.4 mm Data Sheet PN10505EJ05V0DS PS2561B-1,PS2561BL-1,PS2561BL1-1,PS2561BL2-1 MARKING EXAMPLE Data Sheet PN10505EJ05V0DS 3 PS2561B-1,PS2561BL-1,PS2561BL1-1,PS2561BL2-1 ORDERING INFORMATION Part Number Order Number Solder Plating Specification Packing Style Safety Standard Approval Application Part Number *1 PS2561B-1 PS2561B-1-A PS2561BL-1 PS2561BL-1-A (UL, CSA, BSI, PS2561BL1-1 PS2561BL1-1-A SEMKO, NEMKO, PS2561BL2-1 PS2561BL2-1-A DEMKO, FIMKO PS2561BL-1-F3 PS2561BL-1-F3-A Embossed Tape 2 000 pcs/reel PS2561BL2-1-E3 PS2561BL2-1-E3-A Embossed Tape 1 000 pcs/reel PS2561B-1-V PS2561B-1-V-A Magazine case 100 pcs PS2561BL-1-V PS2561BL-1-V-A (VDE0884 Part2) PS2561BL1-1-V PS2561BL1-1-V-A approved PS2561BL2-1-V PS2561BL2-1-V-A (Option) PS2561BL-1-V-F3 PS2561BL-1-V-F3-A Embossed Tape 2 000 pcs/reel PS2561BL2-1-V-E3 PS2561BL2-1-V-E3-A Embossed Tape 1 000 pcs/reel PS2561B-1 PS2561B-1Y-A Special version PS2561BL-1 PS2561BL-1Y-A (Pb-Free and (UL, CSA, BSI, PS2561BL1-1 PS2561BL1-1Y-A Halogen Free) SEMKO, NEMKO, PS2561BL2-1 PS2561BL2-1Y-A PS2561BL-1-F3 PS2561BL-1Y-F3-A Embossed Tape 2 000 pcs/reel PS2561BL2-1-E3 PS2561BL2-1Y-E3-A Embossed Tape 1 000 pcs/reel PS2561B-1-V PS2561B-1Y-V-A Magazine case 100 pcs PS2561BL-1-V PS2561BL-1Y-V-A (VDE0884 Part2) PS2561BL1-1-V PS2561BL1-1Y-V-A approved PS2561BL2-1-V PS2561BL2-1Y-V-A (Option) PS2561BL-1-V-F3 PS2561BL-1Y-V-F3-A Embossed Tape 2 000 pcs/reel PS2561BL2-1-V-E3 PS2561BL2-1Y-V-E3-A Embossed Tape 1 000 pcs/reel Pb-Free Magazine case 100 pcs Magazine case 100 pcs Standard products approved) DIN EN60747-5-2 Standard products DEMKO, FIMKO approved) DIN EN60747-5-2 *1 For the application of the Safety Standard, following part number should be used. 4 Data Sheet PN10505EJ05V0DS PS2561B-1 PS2561B-1 PS2561B-1,PS2561BL-1,PS2561BL1-1,PS2561BL2-1 ABSOLUTE MAXIMUM RATINGS (TA = 25C, unless otherwise specified) Parameter Symbol Ratings Unit Reverse Voltage VR 6 V Forward Current (DC) IF 40 mA PD/C 1.5 mW/C PD 150 mW IFP 1 A Collector to Emitter Voltage VCEO 80 V Emitter to Collector Voltage VECO 7 V IC 50 mA PC/C 1.5 mW/C PC 150 mW BV 5 000 Vr.m.s. Operating Ambient Temperature TA –55 to +110 C Storage Temperature Tstg –55 to +150 C Diode Power Dissipation Derating Power Dissipation Peak Forward Current Transistor *1 Collector Current Power Dissipation Derating Power Dissipation Isolation Voltage *2 *1 PW = 100 s, Duty Cycle = 1% *2 AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output. Pins 1-2 shorted together, 3-4 shorted together. Data Sheet PN10505EJ05V0DS 5 PS2561B-1,PS2561BL-1,PS2561BL1-1,PS2561BL2-1 ELECTRICAL CHARACTERISTICS (TA = 25C) Parameter Diode Symbol Conditions Forward Voltage VF IF = 10 mA Reverse Current IR VR = 5 V Terminal Capacitance Ct V = 0 V, f = 1.0 MHz MIN. TYP. MAX. Unit 1.17 1.4 V 5 A 50 Transistor Collector to Emitter Dark Current ICEO VCE = 48 V, IF = 0 mA Coupled Current Transfer Ratio (IC/IF)*1 CTR IF = 5 mA, VCE = 5 V 100 200 IF = 1 mA, VCE = 5 V 50 100 Collector Saturation Voltage VCE (sat) Isolation Resistance RI-O VI-O = 1.0 kVDC Isolation Capacitance CI-O V = 0 V, f = 1.0 MHz *2 tr Rise Time *2 Fall Time IF = 10 mA, IC = 2 mA VCC = 10 V, IC = 2 mA, RL = 100  tf CTR Rank CTR (%) Conditions 100 to 200 IF = 5 mA, VCE = 5 V 50 and larger IF = 1 mA, VCE = 5 V 130 to 260 IF = 5 mA, VCE = 5 V 70 and larger IF = 1 mA, VCE = 5 V 100 to 300 IF = 5 mA, VCE = 5 V 50 and larger IF = 1 mA, VCE = 5 V 200 to 400 IF = 5 mA, VCE = 5 V 100 and larger IF = 1 mA, VCE = 5 V 100 to 400 IF = 5 mA, VCE = 5 V 50 and larger IF = 1 mA, VCE = 5 V Q W D L N *2 Test circuit for switching time 6 Data Sheet PN10505EJ05V0DS 100 nA 400 % 0.3 V  1011 0.5 pF 3 s 5 *1 CTR rank pF PS2561B-1,PS2561BL-1,PS2561BL1-1,PS2561BL2-1 TYPICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified) Remark The graphs indicate nominal characteristics. Data Sheet PN10505EJ05V0DS 7 PS2561B-1,PS2561BL-1,PS2561BL1-1,PS2561BL2-1 Remark 8 The graphs indicate nominal characteristics. Data Sheet PN10505EJ05V0DS PS2561B-1,PS2561BL-1,PS2561BL1-1,PS2561BL2-1 Remark The graph indicates nominal characteristics. Data Sheet PN10505EJ05V0DS 9 PS2561B-1,PS2561BL-1,PS2561BL1-1,PS2561BL2-1 TAPING SPECIFICATIONS (UNIT : mm) 10 Data Sheet PN10505EJ05V0DS PS2561B-1,PS2561BL-1,PS2561BL1-1,PS2561BL2-1 Data Sheet PN10505EJ05V0DS 11 PS2561B-1,PS2561BL-1,PS2561BL1-1,PS2561BL2-1 NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering • Peak reflow temperature 260C or below (package surface temperature) • Time of peak reflow temperature 10 seconds or less • Time of temperature higher than 220C 60 seconds or less • Time to preheat temperature from 120 to 180C 12030 s • Number of reflows Three • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (2) Wave soldering • Temperature 260C or below (molten solder temperature) • Time 10 seconds or less • Preheating conditions 120C or below (package surface temperature) • Number of times One (Allowed to be dipped in solder including plastic mold portion.) • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Soldering by soldering iron • Peak temperature (lead part temperature) 350C or below • Time (each pins) 3 seconds or less • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead. (b) Please be sure that the temperature of the package would not be heated over 100C. 12 Data Sheet PN10505EJ05V0DS PS2561B-1,PS2561BL-1,PS2561BL1-1,PS2561BL2-1 (4) Cautions • Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between corrector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings. 3. Measurement conditions of current transfer ratios (CTR), which differ according to photocoupler Check the setting values before use, since the forward current conditions at CTR measurement differ according to product. When using products other than at the specified forward current, the characteristics curves may differ from the standard curves due to CTR value variations or the like. Therefore, check the characteristics under the actual operating conditions and thoroughly take variations or the like into consideration before use. USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity. Data Sheet PN10505EJ05V0DS 13 PS2561B-1,PS2561BL-1,PS2561BL1-1,PS2561BL2-1 SPECIFICATION OF VDE MARKS LICENSE DOCUMENT Parameter Symbol Climatic test class (IEC 60068-1/DIN EN 60068-1) Spec. Unit 55/100/21 Dielectric strength maximum operating isolation voltage Test voltage (partial discharge test, procedure a for type test and random test) Upr = 1.5  UIORM, Pd  5 pC UIORM Upr 890 1 335 Vpeak Vpeak Test voltage (partial discharge test, procedure b for all devices) Upr = 1.875  UIORM, Pd  5 pC Upr 1 669 Vpeak Highest permissible overvoltage UTR 8 000 Vpeak Degree of pollution (DIN EN 60664-1 VDE0110 Part 1) Comparative tracking index (IEC 60112/DIN EN 60112 (VDE 0303 Part 11)) 2 CTI Material group (DIN EN 60664-1 VDE0110 Part 1) 175 III a Storage temperature range Tstg –55 to +150 C Operating temperature range TA –55 to +100 C Ris MIN. Ris MIN. 1012 1011   Tsi Isi Psi 175 400 700 °C mA mW Ris MIN. 109  Isolation resistance, minimum value VIO = 500 V dc at TA = 25C VIO = 500 V dc at TA MAX. at least 100°C Safety maximum ratings (maximum permissible in case of fault, see thermal derating curve) Package temperature Current (input current IF, Psi = 0) Power (output or total power dissipation) Isolation resistance VIO = 500 V dc at TA = Tsi 14 Data Sheet PN10505EJ05V0DS PS2561B-1,PS2561BL-1,PS2561BL1-1,PS2561BL2-1 Data Sheet PN10505EJ05V0DS 15 PS2561B-1,PS2561BL-1,PS2561BL1-1,PS2561BL2-1 Caution GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. • Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. • Do not burn, destroy, cut, crush, or chemically dissolve the product. • Do not lick the product or in any way allow it to enter the mouth.